1.9
4 Ratings
Gianluca Natalini
Developer
4.7 MB
Size
2022年12月08日
Update Date
Productivity
Category
4+
Age Rating
Age Rating
FingerCAD 螢幕截圖
About FingerCAD
"FingerCAD" è la prima applicazione CAD per il disegno tecnico con le dita assistito da computer per dispositivi portatili. Con "FingerCAD" è possibile disegnare case, ponti, planimetrie di appartamenti, componenti meccanici, figure geometriche, tutto ciò che può essere progettato con un comune CAD per PC. Utile per gli ingegneri di cantiere, architetti, geometri, designer, studenti, ecc. Le possibilità di design con "FingerCAD" sono infinite e tutto questo utilizzando il dispositivo portatile, comodamente seduti o in piedi al lavoro. La facilità d'uso lo rende molto utile e versatile. Il progetto finale può essere salvato con formati standard (es. DXF) e può essere inviato via e-mail o stampato. Lo zoom e pan, la personalizzazione del disegno, i CAD tools più diffusi, il salvataggio automatico e la possibilità di continuare l'attività anche nelle sessioni successive di uso (in fase di avvio il "FingerCAD" caricherà automaticamente i file di progettazione salvati nella sessione precedente di utilizzo), la possibilità di inserimento di misure e di testo libero lo rende davvero unico. Ogni oggetto CAD viene considerato separatamente; si può quindi tornare indietro nel tempo, eliminando gli oggetti dall'ultimo al primo (anche in successive sessioni di lavoro), selezionare e rimuovere le parti non desiderate, rimuovere manualmente gli oggetti di disegno errati. La "acquisizione automatica dei vertici più vicini" facilita il disegno di oggetti grafici adiacenti e la funzione "2x" permette di disegnare i muri (doppia linea) automaticamente (è possibile specificare lo spessore del muro come desiderato). Le tre componenti RGB, la trasparenza alpha, il disegno a mano libera, la capacità di riempire un oggetto con i colori, la tavolozza dei colori, il selettore dei colori, oltre alle normali funzioni di un comune CAD, danno la possibilità di aggiungere effetti grafici manuali al disegno complessivo (anche con disegno a mano libera).
MODIFICARE, COPIARE e SPOSTARE gli oggetti.
CALCOLO AUTOMATICO DELLA MISURA DELL’AREA DI UNA SUPERFICIE POLIGONALE GENERICA 3D.
Alta precisione di disegno "preview dinamica del disegno sotto le dita": quando si disegna appare in alto a destra nella schermata una finestra di preview; sarà quindi possibile vedere esattamente dove verrà inserito il vertice iniziale/finale ad esempio di una linea (osservando la finestra di anteprima che visualizza l'area di disegno non visibile sotto il dito).
AutoPan per la zona di lavoro: se si raggiunge il bordo dello schermo, FingerCAD sposta automaticamente l'area di lavoro in modo da poter disegnare linee più lunghe - non devi utilizzare la funzione "zoom out" per disegnare le linee lunghe.
Esportazione nel formato .OBJ 2D e 3D: modifica il disegno CAD utilizzando i modellatori 3D come Finger3D, Blender, Maya 3D, ecc. o stampa il modello utilizzando stampanti 3D.
Esportazione / importazione file DXF da/per Autocad, QCad, SolidWorks, LibreCAD, …
Esportazione in formato PDF.
Conversioni di formati di file:
- Da DXF a OBJ
- Da DXF a PDF
- Da DXF a IMMAGINE
I modelli 3D possono essere visualizzati direttamente usando "FingerCAD 3D VIEWER".
Condivisione file con DropBox e iCloud Drive (IN e OUT)
Importare i file DXF da un LINK WEB e/o da un allegato di posta elettronica.
Possibilità di stampare il disegno (tramite AirPrint).
Altre caratteristiche:
- Aggancio automatico dei punti di controllo
- UNDO / REDO per gli oggetti grafici, dall'ultimo al primo
- Snap alla griglia
- Griglia regolabile
- Unità di misura selezionabili
- Design multi-livello e multi-piano
- Gli oggetti selezionati possono essere spostati o copiati da un layer ad un altro o da un piano ad un altro piano
- Anteprima di altri layers nel livello corrente
- Ridimensionare e ruotare
- Extend
- Trim
- Mirror
- Inviare una e-mail / condividere i file DXF, OBJ, PDF generati
- DXF part library (architecture, communication, electrical, electronics, mechanical, misc, processing, templates, zipf_libs)
MODIFICARE, COPIARE e SPOSTARE gli oggetti.
CALCOLO AUTOMATICO DELLA MISURA DELL’AREA DI UNA SUPERFICIE POLIGONALE GENERICA 3D.
Alta precisione di disegno "preview dinamica del disegno sotto le dita": quando si disegna appare in alto a destra nella schermata una finestra di preview; sarà quindi possibile vedere esattamente dove verrà inserito il vertice iniziale/finale ad esempio di una linea (osservando la finestra di anteprima che visualizza l'area di disegno non visibile sotto il dito).
AutoPan per la zona di lavoro: se si raggiunge il bordo dello schermo, FingerCAD sposta automaticamente l'area di lavoro in modo da poter disegnare linee più lunghe - non devi utilizzare la funzione "zoom out" per disegnare le linee lunghe.
Esportazione nel formato .OBJ 2D e 3D: modifica il disegno CAD utilizzando i modellatori 3D come Finger3D, Blender, Maya 3D, ecc. o stampa il modello utilizzando stampanti 3D.
Esportazione / importazione file DXF da/per Autocad, QCad, SolidWorks, LibreCAD, …
Esportazione in formato PDF.
Conversioni di formati di file:
- Da DXF a OBJ
- Da DXF a PDF
- Da DXF a IMMAGINE
I modelli 3D possono essere visualizzati direttamente usando "FingerCAD 3D VIEWER".
Condivisione file con DropBox e iCloud Drive (IN e OUT)
Importare i file DXF da un LINK WEB e/o da un allegato di posta elettronica.
Possibilità di stampare il disegno (tramite AirPrint).
Altre caratteristiche:
- Aggancio automatico dei punti di controllo
- UNDO / REDO per gli oggetti grafici, dall'ultimo al primo
- Snap alla griglia
- Griglia regolabile
- Unità di misura selezionabili
- Design multi-livello e multi-piano
- Gli oggetti selezionati possono essere spostati o copiati da un layer ad un altro o da un piano ad un altro piano
- Anteprima di altri layers nel livello corrente
- Ridimensionare e ruotare
- Extend
- Trim
- Mirror
- Inviare una e-mail / condividere i file DXF, OBJ, PDF generati
- DXF part library (architecture, communication, electrical, electronics, mechanical, misc, processing, templates, zipf_libs)
Show More
最新版本4.0更新日誌
Last updated on 2022年12月08日
歷史版本
New development/support team:
- the FingerCAD project restarts with this new version optimized for the new iOS and for all compatible iPhone models
- created new support on Facebook (with development team) for end users (new Facebook page: “Gianluca Natalini”):
> any of your requests (by email or on Messenger) will be implemented and added to FingerCAD as soon as possible with a free update
> replies to your messages (in 24 hours), to your questions, clarifications, help…
App improvements:
Improved drawing and user experience in this version of FingreCAD, on every type of iPhone:
- more workspace area now also on iPhone
- app interfaces redesigned and optimized for each screen/resolution, so you can use every available pixel of your iPhone screen
- revised all the source code and optimized for the new iOS
- improved the FingerCAD "COLOR 3D VIEWER": best 3D visualizer and colored 3D models using the colors assigned to the drawn CAD objects
- best routines to measure the area of a generic polygonal 3D surface
- improved app performances
- added the ability to insert generic polygonal filled surfaces
- best VRE (Virtual Reality Exploration) using Finger3D together with FingerCAD: you can walk in the 3D model and observe it using first person view:
> see it in action "FingerCAD HD and Finger3D HD VRE mode demo" on YouTube: https://youtu.be/S4G43AckKuc
- minor bugs fixed for new iOS
App documentation:
- New documentation (soon also available on Amazon) and video tutorials now available at URL: http://www.ngcybit.it/iTunesApp/fingercad/quick-user-guide.html
- the FingerCAD project restarts with this new version optimized for the new iOS and for all compatible iPhone models
- created new support on Facebook (with development team) for end users (new Facebook page: “Gianluca Natalini”):
> any of your requests (by email or on Messenger) will be implemented and added to FingerCAD as soon as possible with a free update
> replies to your messages (in 24 hours), to your questions, clarifications, help…
App improvements:
Improved drawing and user experience in this version of FingreCAD, on every type of iPhone:
- more workspace area now also on iPhone
- app interfaces redesigned and optimized for each screen/resolution, so you can use every available pixel of your iPhone screen
- revised all the source code and optimized for the new iOS
- improved the FingerCAD "COLOR 3D VIEWER": best 3D visualizer and colored 3D models using the colors assigned to the drawn CAD objects
- best routines to measure the area of a generic polygonal 3D surface
- improved app performances
- added the ability to insert generic polygonal filled surfaces
- best VRE (Virtual Reality Exploration) using Finger3D together with FingerCAD: you can walk in the 3D model and observe it using first person view:
> see it in action "FingerCAD HD and Finger3D HD VRE mode demo" on YouTube: https://youtu.be/S4G43AckKuc
- minor bugs fixed for new iOS
App documentation:
- New documentation (soon also available on Amazon) and video tutorials now available at URL: http://www.ngcybit.it/iTunesApp/fingercad/quick-user-guide.html
Show More
Version History
4.0
2022年12月08日
New development/support team:
- the FingerCAD project restarts with this new version optimized for the new iOS and for all compatible iPhone models
- created new support on Facebook (with development team) for end users (new Facebook page: “Gianluca Natalini”):
> any of your requests (by email or on Messenger) will be implemented and added to FingerCAD as soon as possible with a free update
> replies to your messages (in 24 hours), to your questions, clarifications, help…
App improvements:
Improved drawing and user experience in this version of FingreCAD, on every type of iPhone:
- more workspace area now also on iPhone
- app interfaces redesigned and optimized for each screen/resolution, so you can use every available pixel of your iPhone screen
- revised all the source code and optimized for the new iOS
- improved the FingerCAD "COLOR 3D VIEWER": best 3D visualizer and colored 3D models using the colors assigned to the drawn CAD objects
- best routines to measure the area of a generic polygonal 3D surface
- improved app performances
- added the ability to insert generic polygonal filled surfaces
- best VRE (Virtual Reality Exploration) using Finger3D together with FingerCAD: you can walk in the 3D model and observe it using first person view:
> see it in action "FingerCAD HD and Finger3D HD VRE mode demo" on YouTube: https://youtu.be/S4G43AckKuc
- minor bugs fixed for new iOS
App documentation:
- New documentation (soon also available on Amazon) and video tutorials now available at URL: http://www.ngcybit.it/iTunesApp/fingercad/quick-user-guide.html
- the FingerCAD project restarts with this new version optimized for the new iOS and for all compatible iPhone models
- created new support on Facebook (with development team) for end users (new Facebook page: “Gianluca Natalini”):
> any of your requests (by email or on Messenger) will be implemented and added to FingerCAD as soon as possible with a free update
> replies to your messages (in 24 hours), to your questions, clarifications, help…
App improvements:
Improved drawing and user experience in this version of FingreCAD, on every type of iPhone:
- more workspace area now also on iPhone
- app interfaces redesigned and optimized for each screen/resolution, so you can use every available pixel of your iPhone screen
- revised all the source code and optimized for the new iOS
- improved the FingerCAD "COLOR 3D VIEWER": best 3D visualizer and colored 3D models using the colors assigned to the drawn CAD objects
- best routines to measure the area of a generic polygonal 3D surface
- improved app performances
- added the ability to insert generic polygonal filled surfaces
- best VRE (Virtual Reality Exploration) using Finger3D together with FingerCAD: you can walk in the 3D model and observe it using first person view:
> see it in action "FingerCAD HD and Finger3D HD VRE mode demo" on YouTube: https://youtu.be/S4G43AckKuc
- minor bugs fixed for new iOS
App documentation:
- New documentation (soon also available on Amazon) and video tutorials now available at URL: http://www.ngcybit.it/iTunesApp/fingercad/quick-user-guide.html
3.0
2017年05月30日
Quest’app è stata aggiornata da Apple per visualizzare l’icona dell’app di Apple Watch.
* FingerCAD "COLOR 3D VIEWER": You can visualize the colored 3D models using the colors assigned to the drawn CAD objects
* Added the ability to calculate the measurement of the area of a generic polygonal 3D surface
* Added the ability to insert generic polygonal filled surfaces
* VRE (Virtual Reality Exploration) using Finger3D together with FingerCAD: you can walk in the 3D model and observe it using first person view...
see it in action "FingerCAD HD and Finger3D HD VRE mode demo " on YouTube:
https://www.youtube.com/watch?v=S4G43AckKuc&feature=youtu.be
* Minor bugs fixed for iOS 10
New documentation and video tutorials available at URL:
http://www.ngcybit.it/iTunesApp/fingercad/quick-user-guide.html
* FingerCAD "COLOR 3D VIEWER": You can visualize the colored 3D models using the colors assigned to the drawn CAD objects
* Added the ability to calculate the measurement of the area of a generic polygonal 3D surface
* Added the ability to insert generic polygonal filled surfaces
* VRE (Virtual Reality Exploration) using Finger3D together with FingerCAD: you can walk in the 3D model and observe it using first person view...
see it in action "FingerCAD HD and Finger3D HD VRE mode demo " on YouTube:
https://www.youtube.com/watch?v=S4G43AckKuc&feature=youtu.be
* Minor bugs fixed for iOS 10
New documentation and video tutorials available at URL:
http://www.ngcybit.it/iTunesApp/fingercad/quick-user-guide.html
2.74
2016年05月04日
* iOS 8.x and 9.x and performances optimizations
* Battery duration optimization: decreased the power consumption (30%)
* Simplified the design procedure to draw joined objects (better SNAPS TO THE NEAREST CONTROL POINT)
* New fast and powerful ASCII DXF (all years) import routine, natively built into FingerCAD:
-> You can now import big DXF files in max 5 seconds
-> it is NOT REQUIRED an INTERNET CONNECTION, all is done by FingerCAD app
-> fully compatible with the free “Teigha File Converter” app (use this app to convert Your DWG files to DXF ASCII for FingerCAD)
* Minor bugs fixed
* Battery duration optimization: decreased the power consumption (30%)
* Simplified the design procedure to draw joined objects (better SNAPS TO THE NEAREST CONTROL POINT)
* New fast and powerful ASCII DXF (all years) import routine, natively built into FingerCAD:
-> You can now import big DXF files in max 5 seconds
-> it is NOT REQUIRED an INTERNET CONNECTION, all is done by FingerCAD app
-> fully compatible with the free “Teigha File Converter” app (use this app to convert Your DWG files to DXF ASCII for FingerCAD)
* Minor bugs fixed
2.72
2014年07月07日
* New interface for iOS 7
* iOS 7 optimizations (for iPhone 4, iPhone 5, 5c, 5s)
* WIDESCREEN DISPLAY support
* Added the frontal selection CAD tools toolbar in the main window (like in the FingerCAD HD version)
* Added the design preview in the projects archive/management window (like in the FingerCAD HD version)
* Added some help images for the 3d objects design settings
* Ability to share the native FingerCAD project files with other devices (like for example from the iPad/iPad Mini to the iPhone/iTouch or from an iPad/iPad Mini to another iPad/iPad Mini), with other installed apps or with dropbox (.fcad files contains 2D and 3D objects data, objects colors, objects transparency data, objects styles, etc…, all You can see in the FingerCAD project workspace 2D and 3D)
* Ability to send with an email the native FingerCAD project files (.fcad files)
* Ability to import .fcad files from dropbox, from email attachments, from web links or from other installed apps (like for example "megaDownloader Web Browser (HD)" app, etc…)
* New "send projects with an email" interface
* Better routines for DXF import (it allows now to import bigger DXF files)
* Added the dynamic label "line angle" respect to the X axis, visualized during the line construction
* Added the TRIM tool (EDIT -> TRIM) to trim:
- a line to another line (touch a line1 control point and raise the finger from the screen: the line1 will be trimmed to the nearest line2 intersection point)
- a line to an ARC (touch a line control point and raise the finger from the screen: the line will be trimmed to the nearest arc intersection point)
- a line to a CIRCLE (touch a line control point and raise the finger from the screen: the line will be trimmed to the nearest circle intersection point)
- a line to a RECT (touch a line control point and raise the finger from the screen: the line will be trimmed to the nearest rect intersection point)
* Added the EXTEND tool (EDIT -> EXTEND) to extend:
- a line to another line (touch a line1 control point and raise the finger from the screen: the line1 will be extended to the nearest line2 intersection point)
- a line to an ARC (touch a line control point and raise the finger from the screen: the line will be extended to the nearest arc intersection point)
- a line to a CIRCLE (touch a line control point and raise the finger from the screen: the line will be extended to the nearest circle intersection point)
- a line to a RECT (touch a line control point and raise the finger from the screen: the line will be extended to the nearest rect intersection point)
* Library of dxf objects (architecture, communication, electrical, electronics, mechanical, misc, processing, templates, zipf_libs) with a new multilevel folders DXF Archive manager. You can now:
- download the dxf objects part library using the download button
- unzip the downloaded part library
- browse the dxf objects of the part library (with dxf object preview)
- import and merge the dxf objects of the part library with the current cad project
- add Your personal dxf objects library and manage it with the dxf archive
- unzip generic dxf library (using multilevel folders)
* Added the ability to import external .dxf objects libraries (stored in a .zip archive file format) using "Open In" or "iTunes File Sharing":
- from the web (for example using Safari or megaDownloader Web Browser)
- from a mail attachment (using Mail)
- from dropbox
All the imported dxf objects libraries will be saved in the FingerCAD "dxf Archive" and can be used in Your CAD projects.
* Minor bugs fixed for:
- multilayers design "edit" routines
- multilayers design "selective tap selection" routines
Documentazione, FAQ e video tutorials:
http://www.ngcybit.it/iTunesApp/fingercad/quick-user-guide.html
* iOS 7 optimizations (for iPhone 4, iPhone 5, 5c, 5s)
* WIDESCREEN DISPLAY support
* Added the frontal selection CAD tools toolbar in the main window (like in the FingerCAD HD version)
* Added the design preview in the projects archive/management window (like in the FingerCAD HD version)
* Added some help images for the 3d objects design settings
* Ability to share the native FingerCAD project files with other devices (like for example from the iPad/iPad Mini to the iPhone/iTouch or from an iPad/iPad Mini to another iPad/iPad Mini), with other installed apps or with dropbox (.fcad files contains 2D and 3D objects data, objects colors, objects transparency data, objects styles, etc…, all You can see in the FingerCAD project workspace 2D and 3D)
* Ability to send with an email the native FingerCAD project files (.fcad files)
* Ability to import .fcad files from dropbox, from email attachments, from web links or from other installed apps (like for example "megaDownloader Web Browser (HD)" app, etc…)
* New "send projects with an email" interface
* Better routines for DXF import (it allows now to import bigger DXF files)
* Added the dynamic label "line angle" respect to the X axis, visualized during the line construction
* Added the TRIM tool (EDIT -> TRIM) to trim:
- a line to another line (touch a line1 control point and raise the finger from the screen: the line1 will be trimmed to the nearest line2 intersection point)
- a line to an ARC (touch a line control point and raise the finger from the screen: the line will be trimmed to the nearest arc intersection point)
- a line to a CIRCLE (touch a line control point and raise the finger from the screen: the line will be trimmed to the nearest circle intersection point)
- a line to a RECT (touch a line control point and raise the finger from the screen: the line will be trimmed to the nearest rect intersection point)
* Added the EXTEND tool (EDIT -> EXTEND) to extend:
- a line to another line (touch a line1 control point and raise the finger from the screen: the line1 will be extended to the nearest line2 intersection point)
- a line to an ARC (touch a line control point and raise the finger from the screen: the line will be extended to the nearest arc intersection point)
- a line to a CIRCLE (touch a line control point and raise the finger from the screen: the line will be extended to the nearest circle intersection point)
- a line to a RECT (touch a line control point and raise the finger from the screen: the line will be extended to the nearest rect intersection point)
* Library of dxf objects (architecture, communication, electrical, electronics, mechanical, misc, processing, templates, zipf_libs) with a new multilevel folders DXF Archive manager. You can now:
- download the dxf objects part library using the download button
- unzip the downloaded part library
- browse the dxf objects of the part library (with dxf object preview)
- import and merge the dxf objects of the part library with the current cad project
- add Your personal dxf objects library and manage it with the dxf archive
- unzip generic dxf library (using multilevel folders)
* Added the ability to import external .dxf objects libraries (stored in a .zip archive file format) using "Open In" or "iTunes File Sharing":
- from the web (for example using Safari or megaDownloader Web Browser)
- from a mail attachment (using Mail)
- from dropbox
All the imported dxf objects libraries will be saved in the FingerCAD "dxf Archive" and can be used in Your CAD projects.
* Minor bugs fixed for:
- multilayers design "edit" routines
- multilayers design "selective tap selection" routines
Documentazione, FAQ e video tutorials:
http://www.ngcybit.it/iTunesApp/fingercad/quick-user-guide.html
1.84
2012年05月03日
Version Number: 1.83
"Ease of use update"
* New "LINE: ANGLE, LENGTH" tool:
- write the line first point position (X,Y coordinate) or touch the screen without dragging Your finger to set X,Y coordinate
- write the line length using "LINE: LENGTH" text field
- choose rapidly the line angular direction (0°, 90°, 180°, 270°) using the new main direction buttons
- press the "INSERT" button to add a new line (if POLYLINE is enabled "POLY->ON", You can add many lines joined together simply changing the line length and the line angle and pressing the INSERT button)
* Better "LINE: SNAPS TO THE NEAREST CONTROL POINT" tool
* MIRROR and COPY MIRROR for selected CAD objects respect the X axis or the Y axis
* Action multiplier x1,x3,x15 can now be used for COPY and MOVE
* Ability to copy, move, scale, rotate from the object current layer to a destination layer (the current selected layer) also for from "on all the layers; LAYER=ALL" to a single layer
* Touch the screen and set the anchor position (enable anchor pressing the anchor button); while You are drawing an object (dragging Your finger on the screen) the anchor position will be updated automatically with the last touched position on the screen (it show You the X,Y coordinates of the position of Your touch)
* Project georeferencing added
* Compass rose added
Version Number: 1.84
"Ease of use update STEP 2"
* New selection procedure ("multiple selection rectangle" and "selective tap selection"):
- "multiple selection rectangle": draw multiple selection rectangles to select more objects
- "selective tap selection": tap an object to select or deselect the touched object; if multiple objects exist in the touched position repeat the tap action to select the second or third or fourth (etc...) object in the position of touch
- the selected objects remain selected during editing: copy, move, scale, rotate, mirror, mirror a copy (until user do not deselects the selected objects using "selective tap selection")
- when "SELECTION RECTANGLE" tool will be disabled ("SELECTION RECTANGLE: OFF") all the selected objects will be automatically unselected (use this to deselect all the objects)
* "LINE: SNAPS TO THE NEAREST CONTROL POINT" tool has now MEMORY of the object's acquired snap point:
- it remembers the X position of the snap point if after acquired an object's snap point, the user dragging the finger vertically on the screen (until a certain horizontal distance)
- it remembers the Y position of the snap point if after acquired an object's snap point, the user dragging the finger horizontally on the screen (until a certain vertical distance)
* SNAP TO THE NEAREST CONTROL POINT also for ARC tool
* GESTURE RECOGNIZER for ZOOM and PAN:
- ZOOM IN/OUT with pinch gesture
- PAN dragging 2 fingers on the screen
Documentation and history of the updates available at URL: http://www.ngcybit.it/iTunesApp/fingercad/
"Ease of use update"
* New "LINE: ANGLE, LENGTH" tool:
- write the line first point position (X,Y coordinate) or touch the screen without dragging Your finger to set X,Y coordinate
- write the line length using "LINE: LENGTH" text field
- choose rapidly the line angular direction (0°, 90°, 180°, 270°) using the new main direction buttons
- press the "INSERT" button to add a new line (if POLYLINE is enabled "POLY->ON", You can add many lines joined together simply changing the line length and the line angle and pressing the INSERT button)
* Better "LINE: SNAPS TO THE NEAREST CONTROL POINT" tool
* MIRROR and COPY MIRROR for selected CAD objects respect the X axis or the Y axis
* Action multiplier x1,x3,x15 can now be used for COPY and MOVE
* Ability to copy, move, scale, rotate from the object current layer to a destination layer (the current selected layer) also for from "on all the layers; LAYER=ALL" to a single layer
* Touch the screen and set the anchor position (enable anchor pressing the anchor button); while You are drawing an object (dragging Your finger on the screen) the anchor position will be updated automatically with the last touched position on the screen (it show You the X,Y coordinates of the position of Your touch)
* Project georeferencing added
* Compass rose added
Version Number: 1.84
"Ease of use update STEP 2"
* New selection procedure ("multiple selection rectangle" and "selective tap selection"):
- "multiple selection rectangle": draw multiple selection rectangles to select more objects
- "selective tap selection": tap an object to select or deselect the touched object; if multiple objects exist in the touched position repeat the tap action to select the second or third or fourth (etc...) object in the position of touch
- the selected objects remain selected during editing: copy, move, scale, rotate, mirror, mirror a copy (until user do not deselects the selected objects using "selective tap selection")
- when "SELECTION RECTANGLE" tool will be disabled ("SELECTION RECTANGLE: OFF") all the selected objects will be automatically unselected (use this to deselect all the objects)
* "LINE: SNAPS TO THE NEAREST CONTROL POINT" tool has now MEMORY of the object's acquired snap point:
- it remembers the X position of the snap point if after acquired an object's snap point, the user dragging the finger vertically on the screen (until a certain horizontal distance)
- it remembers the Y position of the snap point if after acquired an object's snap point, the user dragging the finger horizontally on the screen (until a certain vertical distance)
* SNAP TO THE NEAREST CONTROL POINT also for ARC tool
* GESTURE RECOGNIZER for ZOOM and PAN:
- ZOOM IN/OUT with pinch gesture
- PAN dragging 2 fingers on the screen
Documentation and history of the updates available at URL: http://www.ngcybit.it/iTunesApp/fingercad/
1.83
2012年04月23日
"Ease of use update"
* New "LINE: ANGLE, LENGTH" tool:
- write the line first point position (X,Y coordinate) or touch the screen without dragging Your finger to set X,Y coordinate
- write the line length using "LINE: LENGTH" text field
- choose rapidly the line angular direction (0°, 90°, 180°, 270°) using the new main direction buttons
- press the "INSERT" button to add a new line (if POLYLINE is enabled "POLY->ON", You can add many lines joined together simply changing the line length and the line angle and pressing the INSERT button)
* Better "LINE: SNAPS TO THE NEAREST CONTROL POINT" tool
* MIRROR and COPY MIRROR for selected CAD objects respect the X axis or the Y axis
* Action multiplier x1,x3,x15 can now be used for COPY and MOVE
* Ability to copy, move, scale, rotate from the object current layer to a destination layer (the current selected layer) also for from "on all the layers; LAYER=ALL" to a single layer
* Touch the screen and set the anchor position (enable anchor pressing the anchor button); while You are drawing an object (dragging Your finger on the screen) the anchor position will be updated automatically with the last touched position on the screen (it show You the X,Y coordinates of the position of Your touch)
* Project georeferencing added
* Compass rose added
Documentation and history of the updates available at URL: http://www.ngcybit.it/iTunesApp/fingercad/
* New "LINE: ANGLE, LENGTH" tool:
- write the line first point position (X,Y coordinate) or touch the screen without dragging Your finger to set X,Y coordinate
- write the line length using "LINE: LENGTH" text field
- choose rapidly the line angular direction (0°, 90°, 180°, 270°) using the new main direction buttons
- press the "INSERT" button to add a new line (if POLYLINE is enabled "POLY->ON", You can add many lines joined together simply changing the line length and the line angle and pressing the INSERT button)
* Better "LINE: SNAPS TO THE NEAREST CONTROL POINT" tool
* MIRROR and COPY MIRROR for selected CAD objects respect the X axis or the Y axis
* Action multiplier x1,x3,x15 can now be used for COPY and MOVE
* Ability to copy, move, scale, rotate from the object current layer to a destination layer (the current selected layer) also for from "on all the layers; LAYER=ALL" to a single layer
* Touch the screen and set the anchor position (enable anchor pressing the anchor button); while You are drawing an object (dragging Your finger on the screen) the anchor position will be updated automatically with the last touched position on the screen (it show You the X,Y coordinates of the position of Your touch)
* Project georeferencing added
* Compass rose added
Documentation and history of the updates available at URL: http://www.ngcybit.it/iTunesApp/fingercad/
1.82
2012年03月29日
* iOS 5.1 with retina display supported (iOS supported: from iOS 4.2 to the latest iOS available)
* Disabled auto pan procedure for FREEHAND DRAWING tool: now you can draw freehand objects using all the screen surface
For documentation and update history see: http://www.ngcybit.it/iTunesApp/fingercad/
* Disabled auto pan procedure for FREEHAND DRAWING tool: now you can draw freehand objects using all the screen surface
For documentation and update history see: http://www.ngcybit.it/iTunesApp/fingercad/
1.81
2012年03月12日
* Retina display support for 2D and 3D
* Fixed a bug (using specific C flags) that causes malfunction on iOS 4.2 and armv6 processor
* Ability to export the design into a .pdf file format
* Ability to send the generated .pdf file with an email (as an email attachment)
* Added the ability to share with dropbox or other installed apps the files .dxf , .obj , .pdf :
-> this feature give the ability to share:
.dxf files with MAC or PC commercial CAD applications like AutoCAD , QCAD , etc…
.obj files with Finger3D , Blender , Maya 3D , etc… (with Finger3D for iPad, iPhone, iTouch You can continue Your CAD design in a 3D world modeler, add texture like the ground and the sky, add lights, create doors, windows, arcs, add people or 3D furniture, color the 3D design, animate all, render high quality JPG and PNG images with antialiasing and image enhancement filters, print the 3D design, etc…)
.pdf files with pdfManager , acrobat Reader , etc…
* Added the ability to draw filled path for: FREE DRAWING, ARC, CIRCLE, ELLIPSE, GENERIC RECTANGLE/RECT_POLYGON(rectangle after editing), CURVE
* Added free hand drawing tool with high performance/zero latency : now You can use FingerCAD to draw also freehand objects. The zero latency of the FREE DRAWING tool gives to FingerCAD the same power of the professional boards for freehand drawing (try it also with snap to grid disabled)
* Added dynamic label of measure length while placing a measure
* Better indications for the tools labels and new buttons icons
* More accurate controls to set the cad area size
* Better "LINE: ANGLE, LENGTH" routine: now the length is rounded to the nearest integer value and the line length variation depends by the settings of the "grid snap":
- if grid snap = 10 --> the line length variation for each step will be 10
- if grid snap = 5 --> the line length variation for each step will be 5
- if grid snap = 2 --> the line length variation for each step will be 2
- if grid snap = 1 --> the line length variation for each step will be 1
- if grid snap = DISABLED --> the line length variation for each step will be 1
* Increased precision for the ARC routine: the radius length depends now by the settings of "snap to grid: ON/OFF": it simplifies the drawing of doors, windows etc...
* Fixed a bug that cause the computation infinite loop for "LINE: ANGLE OR WALLS CLOSING" tool if the two segments to be closed are parallel
* EDIT (VLINK) and ANCHOR now work together:
example "place a point of a line in the desired position (X,Y)"
- draw a line
- set EDIT to ON pressing on EDIT button (the edit area will appear on the screen)
- choose VLINK (default)
- move the desired point of a line dragging the point (control point) with a finger (the anchor's position values will be updated automatically with the position of touch and the point of the line will be moved in that position)
- when the line's point is near to the desired position, write the desired position with the keyboard in X and Y text fields near the anchor button, confirm with the keyboard "return" button and press on anchor button --> the point of the line will be moved in the X,Y written position
For documentation and update history see: http://www.ngcybit.it/iTunesApp/fingercad/
* Fixed a bug (using specific C flags) that causes malfunction on iOS 4.2 and armv6 processor
* Ability to export the design into a .pdf file format
* Ability to send the generated .pdf file with an email (as an email attachment)
* Added the ability to share with dropbox or other installed apps the files .dxf , .obj , .pdf :
-> this feature give the ability to share:
.dxf files with MAC or PC commercial CAD applications like AutoCAD , QCAD , etc…
.obj files with Finger3D , Blender , Maya 3D , etc… (with Finger3D for iPad, iPhone, iTouch You can continue Your CAD design in a 3D world modeler, add texture like the ground and the sky, add lights, create doors, windows, arcs, add people or 3D furniture, color the 3D design, animate all, render high quality JPG and PNG images with antialiasing and image enhancement filters, print the 3D design, etc…)
.pdf files with pdfManager , acrobat Reader , etc…
* Added the ability to draw filled path for: FREE DRAWING, ARC, CIRCLE, ELLIPSE, GENERIC RECTANGLE/RECT_POLYGON(rectangle after editing), CURVE
* Added free hand drawing tool with high performance/zero latency : now You can use FingerCAD to draw also freehand objects. The zero latency of the FREE DRAWING tool gives to FingerCAD the same power of the professional boards for freehand drawing (try it also with snap to grid disabled)
* Added dynamic label of measure length while placing a measure
* Better indications for the tools labels and new buttons icons
* More accurate controls to set the cad area size
* Better "LINE: ANGLE, LENGTH" routine: now the length is rounded to the nearest integer value and the line length variation depends by the settings of the "grid snap":
- if grid snap = 10 --> the line length variation for each step will be 10
- if grid snap = 5 --> the line length variation for each step will be 5
- if grid snap = 2 --> the line length variation for each step will be 2
- if grid snap = 1 --> the line length variation for each step will be 1
- if grid snap = DISABLED --> the line length variation for each step will be 1
* Increased precision for the ARC routine: the radius length depends now by the settings of "snap to grid: ON/OFF": it simplifies the drawing of doors, windows etc...
* Fixed a bug that cause the computation infinite loop for "LINE: ANGLE OR WALLS CLOSING" tool if the two segments to be closed are parallel
* EDIT (VLINK) and ANCHOR now work together:
example "place a point of a line in the desired position (X,Y)"
- draw a line
- set EDIT to ON pressing on EDIT button (the edit area will appear on the screen)
- choose VLINK (default)
- move the desired point of a line dragging the point (control point) with a finger (the anchor's position values will be updated automatically with the position of touch and the point of the line will be moved in that position)
- when the line's point is near to the desired position, write the desired position with the keyboard in X and Y text fields near the anchor button, confirm with the keyboard "return" button and press on anchor button --> the point of the line will be moved in the X,Y written position
For documentation and update history see: http://www.ngcybit.it/iTunesApp/fingercad/
1.79
2012年01月10日
* Added EDIT ACTION MULTIPLIER (x1, x3, x15) for "rotate and scale selected objects"
* Better background image management: optimization of device's resource and graphics core acceleration
* Dynamic grid settings: now the grid reduces automatically the grid size when You zoom in (graphical grid support for very little objects - "snap to grid" feature can be set independently from graphical grid settings)
* Fixed box measure label value
* Minor bug fixed
For documentation and update history see:
http://www.ngcybit.it/iTunesApp/fingercad/
* Better background image management: optimization of device's resource and graphics core acceleration
* Dynamic grid settings: now the grid reduces automatically the grid size when You zoom in (graphical grid support for very little objects - "snap to grid" feature can be set independently from graphical grid settings)
* Fixed box measure label value
* Minor bug fixed
For documentation and update history see:
http://www.ngcybit.it/iTunesApp/fingercad/
1.78
2011年12月07日
* AirPrint (now You can print what You see in the CAD area)
* New Projects and Projects Archive window, with current project design preview visualization, projects creation date and new graphics
* Color Palette and Color Picker added
* Move and Copy command range modified
* Save/Archive workspace loaded background image
* More accurate edit area radius control
* Selection indicator color and selected objects and text color modified if white background is selected (better color contrast)
* iOS supported version: from 4.2 to the latest iOS 5
For documentation and update history see: http://www.ngcybit.it/iTunesApp/fingercad/
* New Projects and Projects Archive window, with current project design preview visualization, projects creation date and new graphics
* Color Palette and Color Picker added
* Move and Copy command range modified
* Save/Archive workspace loaded background image
* More accurate edit area radius control
* Selection indicator color and selected objects and text color modified if white background is selected (better color contrast)
* iOS supported version: from 4.2 to the latest iOS 5
For documentation and update history see: http://www.ngcybit.it/iTunesApp/fingercad/
1.77
2011年10月22日
Version Number: 1.76
* Ability to specify the dxf file name when You send your dxf projects files to DROPBOX or iDisk using "Project Name" text field
* UNDO / REDO buttons
* New FingerCAD Settings window
* Modify button for cad objects HEIGHT and QUOTA - "HEIGHT" button:
- if no one cad object is selected --> modify all cad objects HEIGHT and QUOTA as specified into settings window
- if one or more cad objects are selected --> modify selected cad objects HEIGHT and QUOTA as specified into settings window
* Modify button for cad objects COLOR - "COLOR" button:
- if no one cad object is selected --> modify all cad objects RED, GREEN, BLUE color components as specified into settings window
- if one or more cad objects are selected --> modify selected cad objects RED, GREEN, BLUE color components as specified into settings window
* Modify button for cad objects ALPHA (transparency) - "ALPHA" button:
- if no one cad object is selected --> modify all cad objects ALPHA (transparency) component as specified into settings window
- if one or more cad objects are selected --> modify selected cad objects ALPHA (transparency) component as specified into settings window
* Modify button for cad objects WIDTH - "WIDTH" button:
- if no one cad object is selected --> modify all cad objects WIDTH as specified into settings window
- if one or more cad objects are selected --> modify selected cad objects WIDTH as specified into settings window
* New EDIT tool: MOVE - TRANSFORM - VLINK
- MOVE: touch and drag with Your finger the CAD objects
- TRANSFORM: touch and transform (dragging your finger) the shape of CAD objects
- VLINK: join with a touch the CAD objects; use the ANCHOR tool with VLINK to specify manually (using the ANCHOR X,Y text fields) the exact position of the object's vertexes in the CAD AREA
* More accurate EDIT --> NODE/TOUCH acquiring routine
* Edit radius slider control range increased
* DOC button ("?") added: use that button to download the latest FingerCAD available documentation (it needs an internet connection)
* Simplified and more accessible users interface
* Better cad objects height and quota indicator (zoom with dynamic font dimension)
* DXF read procedure optimized (it prevents FingerCAD automatic shutdown for great dimension DXF files)
* New DXF Archive Manager (user can now store, load, save, modify dxf file name and share dxf projects with dropbox or iDisk using FingerCAD dxf archive itself)
* New FingerCAD Projects Archive
* Optimized drawing performances and cad objects DB
* Optimized zoom with two fingers routines
* Precision IMAGE SCALING using near proximity scale increase and decrease buttons or text field
* Possibility to increase or decrease fonts dimension using increase/decrease fonts dimension buttons
* Supported device Portrait and Upside Down orientations (portrait and landscape orientations for dxf and projects archive)
* New Copy routine (copy respect X or Y axes at specified distance)
* Precision Copy / Move routine using near proximity increase and decrease buttons (for the copy / move distance value selector)
* Precision line with angle routine using near proximity increase and decrease buttons (for the angle value control)
* Precision floor height using near proximity increase and decrease buttons (for the floor height value)
* Floor height control range increased
* Added floor number: 6 (FLOOR # = 6)
* RESET VIEW button
* Minor bug fixed
Version Number: 1.77
* iOS 5 tested
* Design visualization fixed on iOS 5
* Background image allows editing enabled
* Ability to specify the dxf file name when You send your dxf projects files to DROPBOX or iDisk using "Project Name" text field
* UNDO / REDO buttons
* New FingerCAD Settings window
* Modify button for cad objects HEIGHT and QUOTA - "HEIGHT" button:
- if no one cad object is selected --> modify all cad objects HEIGHT and QUOTA as specified into settings window
- if one or more cad objects are selected --> modify selected cad objects HEIGHT and QUOTA as specified into settings window
* Modify button for cad objects COLOR - "COLOR" button:
- if no one cad object is selected --> modify all cad objects RED, GREEN, BLUE color components as specified into settings window
- if one or more cad objects are selected --> modify selected cad objects RED, GREEN, BLUE color components as specified into settings window
* Modify button for cad objects ALPHA (transparency) - "ALPHA" button:
- if no one cad object is selected --> modify all cad objects ALPHA (transparency) component as specified into settings window
- if one or more cad objects are selected --> modify selected cad objects ALPHA (transparency) component as specified into settings window
* Modify button for cad objects WIDTH - "WIDTH" button:
- if no one cad object is selected --> modify all cad objects WIDTH as specified into settings window
- if one or more cad objects are selected --> modify selected cad objects WIDTH as specified into settings window
* New EDIT tool: MOVE - TRANSFORM - VLINK
- MOVE: touch and drag with Your finger the CAD objects
- TRANSFORM: touch and transform (dragging your finger) the shape of CAD objects
- VLINK: join with a touch the CAD objects; use the ANCHOR tool with VLINK to specify manually (using the ANCHOR X,Y text fields) the exact position of the object's vertexes in the CAD AREA
* More accurate EDIT --> NODE/TOUCH acquiring routine
* Edit radius slider control range increased
* DOC button ("?") added: use that button to download the latest FingerCAD available documentation (it needs an internet connection)
* Simplified and more accessible users interface
* Better cad objects height and quota indicator (zoom with dynamic font dimension)
* DXF read procedure optimized (it prevents FingerCAD automatic shutdown for great dimension DXF files)
* New DXF Archive Manager (user can now store, load, save, modify dxf file name and share dxf projects with dropbox or iDisk using FingerCAD dxf archive itself)
* New FingerCAD Projects Archive
* Optimized drawing performances and cad objects DB
* Optimized zoom with two fingers routines
* Precision IMAGE SCALING using near proximity scale increase and decrease buttons or text field
* Possibility to increase or decrease fonts dimension using increase/decrease fonts dimension buttons
* Supported device Portrait and Upside Down orientations (portrait and landscape orientations for dxf and projects archive)
* New Copy routine (copy respect X or Y axes at specified distance)
* Precision Copy / Move routine using near proximity increase and decrease buttons (for the copy / move distance value selector)
* Precision line with angle routine using near proximity increase and decrease buttons (for the angle value control)
* Precision floor height using near proximity increase and decrease buttons (for the floor height value)
* Floor height control range increased
* Added floor number: 6 (FLOOR # = 6)
* RESET VIEW button
* Minor bug fixed
Version Number: 1.77
* iOS 5 tested
* Design visualization fixed on iOS 5
* Background image allows editing enabled
1.76
2011年08月26日
* Ability to specify the dxf file name when You send your dxf projects files to DROPBOX or iDisk using "Project Name" text field
* UNDO / REDO buttons
* New FingerCAD Settings window
* Modify button for cad objects HEIGHT and QUOTA - "HEIGHT" button:
- if no one cad object is selected --> modify all cad objects HEIGHT and QUOTA as specified into settings window
- if one or more cad objects are selected --> modify selected cad objects HEIGHT and QUOTA as specified into settings window
* Modify button for cad objects COLOR - "COLOR" button:
- if no one cad object is selected --> modify all cad objects RED, GREEN, BLUE color components as specified into settings window
- if one or more cad objects are selected --> modify selected cad objects RED, GREEN, BLUE color components as specified into settings window
* Modify button for cad objects ALPHA (transparency) - "ALPHA" button:
- if no one cad object is selected --> modify all cad objects ALPHA (transparency) component as specified into settings window
- if one or more cad objects are selected --> modify selected cad objects ALPHA (transparency) component as specified into settings window
* Modify button for cad objects WIDTH - "WIDTH" button:
- if no one cad object is selected --> modify all cad objects WIDTH as specified into settings window
- if one or more cad objects are selected --> modify selected cad objects WIDTH as specified into settings window
* New EDIT tool: MOVE - TRANSFORM - VLINK
- MOVE: touch and drag with Your finger the CAD objects
- TRANSFORM: touch and transform (dragging your finger) the shape of CAD objects
- VLINK: join with a touch the CAD objects; use the ANCHOR tool with VLINK to specify manually (using the ANCHOR X,Y text fields) the exact position of the object's vertexes in the CAD AREA
* More accurate EDIT --> NODE/TOUCH acquiring routine
* Edit radius slider control range increased
* DOC button ("?") added: use that button to download the latest FingerCAD available documentation (it needs an internet connection)
* Simplified and more accessible users interface
* Better cad objects height and quota indicator (zoom with dynamic font dimension)
* DXF read procedure optimized (it prevents FingerCAD automatic shutdown for great dimension DXF files)
* New DXF Archive Manager (user can now store, load, save, modify dxf file name and share dxf projects with dropbox or iDisk using FingerCAD dxf archive itself)
* New FingerCAD Projects Archive
* Optimized drawing performances and cad objects DB
* Optimized zoom with two fingers routines
* Precision IMAGE SCALING using near proximity scale increase and decrease buttons or text field
* Possibility to increase or decrease fonts dimension using increase/decrease fonts dimension buttons
* Supported device Portrait and Upside Down orientations (portrait and landscape orientations for dxf and projects archive)
* New Copy routine (copy respect X or Y axes at specified distance)
* Precision Copy / Move routine using near proximity increase and decrease buttons (for the copy / move distance value selector)
* Precision line with angle routine using near proximity increase and decrease buttons (for the angle value control)
* Precision floor height using near proximity increase and decrease buttons (for the floor height value)
* Floor height control range increased
* Added floor number: 6 (FLOOR # = 6)
* RESET VIEW button
* Minor bug fixed
* UNDO / REDO buttons
* New FingerCAD Settings window
* Modify button for cad objects HEIGHT and QUOTA - "HEIGHT" button:
- if no one cad object is selected --> modify all cad objects HEIGHT and QUOTA as specified into settings window
- if one or more cad objects are selected --> modify selected cad objects HEIGHT and QUOTA as specified into settings window
* Modify button for cad objects COLOR - "COLOR" button:
- if no one cad object is selected --> modify all cad objects RED, GREEN, BLUE color components as specified into settings window
- if one or more cad objects are selected --> modify selected cad objects RED, GREEN, BLUE color components as specified into settings window
* Modify button for cad objects ALPHA (transparency) - "ALPHA" button:
- if no one cad object is selected --> modify all cad objects ALPHA (transparency) component as specified into settings window
- if one or more cad objects are selected --> modify selected cad objects ALPHA (transparency) component as specified into settings window
* Modify button for cad objects WIDTH - "WIDTH" button:
- if no one cad object is selected --> modify all cad objects WIDTH as specified into settings window
- if one or more cad objects are selected --> modify selected cad objects WIDTH as specified into settings window
* New EDIT tool: MOVE - TRANSFORM - VLINK
- MOVE: touch and drag with Your finger the CAD objects
- TRANSFORM: touch and transform (dragging your finger) the shape of CAD objects
- VLINK: join with a touch the CAD objects; use the ANCHOR tool with VLINK to specify manually (using the ANCHOR X,Y text fields) the exact position of the object's vertexes in the CAD AREA
* More accurate EDIT --> NODE/TOUCH acquiring routine
* Edit radius slider control range increased
* DOC button ("?") added: use that button to download the latest FingerCAD available documentation (it needs an internet connection)
* Simplified and more accessible users interface
* Better cad objects height and quota indicator (zoom with dynamic font dimension)
* DXF read procedure optimized (it prevents FingerCAD automatic shutdown for great dimension DXF files)
* New DXF Archive Manager (user can now store, load, save, modify dxf file name and share dxf projects with dropbox or iDisk using FingerCAD dxf archive itself)
* New FingerCAD Projects Archive
* Optimized drawing performances and cad objects DB
* Optimized zoom with two fingers routines
* Precision IMAGE SCALING using near proximity scale increase and decrease buttons or text field
* Possibility to increase or decrease fonts dimension using increase/decrease fonts dimension buttons
* Supported device Portrait and Upside Down orientations (portrait and landscape orientations for dxf and projects archive)
* New Copy routine (copy respect X or Y axes at specified distance)
* Precision Copy / Move routine using near proximity increase and decrease buttons (for the copy / move distance value selector)
* Precision line with angle routine using near proximity increase and decrease buttons (for the angle value control)
* Precision floor height using near proximity increase and decrease buttons (for the floor height value)
* Floor height control range increased
* Added floor number: 6 (FLOOR # = 6)
* RESET VIEW button
* Minor bug fixed
1.75
2011年06月01日
Version Number: 1.72
Fix:
- .DXF Projects Archive added:
1) store all your DXF projects into FingerCAD Documents folder using "iTunes File Sharing"
2) open "DXF Projects Archive", select your DXF project, import and merge it with current project (You can merge two or more DXF projects with current project workspace)
3) compatibility with FREE objects DXF library: "partLibrary". it includes the following dxf library objects: architecture, electrical, electronics, mechanical, misc, processing, templates, zipf_libs
- .DXF file import procedure fixed for DXF files generated by "Windows CAD software"
(with this fix you can now import .DXF files generated by CAD software running under Windows)
- .DXF file import procedure minor bug fixed
- .DXF file import procedure optimized (supports great file dimension)
- Graphics acceleration (also for great model): supports for multiple core CPUs
- "FingerCAD 3D Viewer": better supports for complexes 3D models (Finger3D core integration)
- UNDO for VERTEX EDITING WITH FINGERS functionality (if you have wrong, you can now UNDONE the VERTEX EDITING WITH FINGERS functionality (enabled with EDIT button))
- OBJECTS SNAP routine added (with this feature you can recalculate the objects snapping points, for example when you EDIT one or more objects)
Version Number: 1.73
Enhancements:
* DROPBOX / iDisk integration (READ remotely stored DXF files):
- read, modify, save (into "FingerCAD project archive") dxf files stored on DROPBOX or iDisk server: You can open dxf file with FingerCAD directly from the DROPBOX or iDisk client for iTouch/iPhone/iPad (FREE) clicking on the "open in" button in the DROPBOX or iDisk client and choose FingerCAD --> the chosen dxf file will be opened automatically by FingerCAD (you can also merge more than one dxf files into the current workspace importing them one after the other from DROPBOX or iDisk - FingerCAD will work in background). It works like the "FingerCAD DXF Archive" but the archive is saved into the DROPBOX or iDisk server
* E-MAIL integration:
- read, modify, save (into "FingerCAD project archive") dxf files from email attachments
* WEB LINK integration:
- read, modify, save (into "FingerCAD project archive") dxf files directly from an internet link
* UNDO:
- undo for select, copy and move (if you have wrong, you can now UNDONE copy or move)
* Import for great dxf file dimension (compatible with the device memory)
Version Number: 1.74
Enhancements:
* DROPBOX / iDisk integration (UPLOAD modified DXF):
You can now upload dxf files (read from FingerCAD archive, DROPBOX or iDisk servers, E-MAIL, WEB LINK and modified with FingerCAD itself) to DROPBOX or iDisk servers:
load dxf file created by your friend, modify it, save it where you want, copy modified dxf file into a DROPBOX or iDisk shared folder and your friend will have your version of dxf file (all can be done using an internet connection).
* UNDER FINGER PREVIEW FOR CAD PRIMITIVE FIRST VERTEX:
Select a CAD primitive (such as a line) and touch the screen (without dragging your finger) --> the position of touch under finger will be displayed upper left in the screen (into the preview window - it give you the possibility to see the exact position of the first vertex for the chosen CAD primitive, under your finger):
if the position is not correct raise your finger from the screen --> CAD primitive drawing will be aborted by FingerCAD (no one CAD primitive will be drawn);
if the position displayed is correct drag your finger on the screen (to draw the CAD primitive you have chosen) and raise your finger to confirm.
* New and better routine for NEAR VERTEXES AUTOMATIC ACQUISITION
* CAD GRID RANGE increased
* Better fonts
* Minor bug fixed
Version Number: 1.75
Enhancements:
Changed minimum "Deployment Target" to iOS 4.2 (for "iPhone 4 Verizon" and "iTouch 2G" compatibility).
This version is iOS 4.3 tested.
It is now compatible with all devices that have minimum iOS 4.2 installed.
Fix:
- .DXF Projects Archive added:
1) store all your DXF projects into FingerCAD Documents folder using "iTunes File Sharing"
2) open "DXF Projects Archive", select your DXF project, import and merge it with current project (You can merge two or more DXF projects with current project workspace)
3) compatibility with FREE objects DXF library: "partLibrary". it includes the following dxf library objects: architecture, electrical, electronics, mechanical, misc, processing, templates, zipf_libs
- .DXF file import procedure fixed for DXF files generated by "Windows CAD software"
(with this fix you can now import .DXF files generated by CAD software running under Windows)
- .DXF file import procedure minor bug fixed
- .DXF file import procedure optimized (supports great file dimension)
- Graphics acceleration (also for great model): supports for multiple core CPUs
- "FingerCAD 3D Viewer": better supports for complexes 3D models (Finger3D core integration)
- UNDO for VERTEX EDITING WITH FINGERS functionality (if you have wrong, you can now UNDONE the VERTEX EDITING WITH FINGERS functionality (enabled with EDIT button))
- OBJECTS SNAP routine added (with this feature you can recalculate the objects snapping points, for example when you EDIT one or more objects)
Version Number: 1.73
Enhancements:
* DROPBOX / iDisk integration (READ remotely stored DXF files):
- read, modify, save (into "FingerCAD project archive") dxf files stored on DROPBOX or iDisk server: You can open dxf file with FingerCAD directly from the DROPBOX or iDisk client for iTouch/iPhone/iPad (FREE) clicking on the "open in" button in the DROPBOX or iDisk client and choose FingerCAD --> the chosen dxf file will be opened automatically by FingerCAD (you can also merge more than one dxf files into the current workspace importing them one after the other from DROPBOX or iDisk - FingerCAD will work in background). It works like the "FingerCAD DXF Archive" but the archive is saved into the DROPBOX or iDisk server
* E-MAIL integration:
- read, modify, save (into "FingerCAD project archive") dxf files from email attachments
* WEB LINK integration:
- read, modify, save (into "FingerCAD project archive") dxf files directly from an internet link
* UNDO:
- undo for select, copy and move (if you have wrong, you can now UNDONE copy or move)
* Import for great dxf file dimension (compatible with the device memory)
Version Number: 1.74
Enhancements:
* DROPBOX / iDisk integration (UPLOAD modified DXF):
You can now upload dxf files (read from FingerCAD archive, DROPBOX or iDisk servers, E-MAIL, WEB LINK and modified with FingerCAD itself) to DROPBOX or iDisk servers:
load dxf file created by your friend, modify it, save it where you want, copy modified dxf file into a DROPBOX or iDisk shared folder and your friend will have your version of dxf file (all can be done using an internet connection).
* UNDER FINGER PREVIEW FOR CAD PRIMITIVE FIRST VERTEX:
Select a CAD primitive (such as a line) and touch the screen (without dragging your finger) --> the position of touch under finger will be displayed upper left in the screen (into the preview window - it give you the possibility to see the exact position of the first vertex for the chosen CAD primitive, under your finger):
if the position is not correct raise your finger from the screen --> CAD primitive drawing will be aborted by FingerCAD (no one CAD primitive will be drawn);
if the position displayed is correct drag your finger on the screen (to draw the CAD primitive you have chosen) and raise your finger to confirm.
* New and better routine for NEAR VERTEXES AUTOMATIC ACQUISITION
* CAD GRID RANGE increased
* Better fonts
* Minor bug fixed
Version Number: 1.75
Enhancements:
Changed minimum "Deployment Target" to iOS 4.2 (for "iPhone 4 Verizon" and "iTouch 2G" compatibility).
This version is iOS 4.3 tested.
It is now compatible with all devices that have minimum iOS 4.2 installed.
1.74
2011年05月13日
Version Number: 1.72 - Enhancements:
- .DXF Projects Archive added:
1) store all your DXF projects into FingerCAD Documents folder using "iTunes File Sharing"
2) open "DXF Projects Archive", select your DXF project, import and merge it with current project (You can merge two or more DXF projects with current project workspace)
3) compatibility with FREE objects DXF library: "partLibrary". it includes the following dxf library objects: architecture, electrical, electronics, mechanical, misc, processing, templates, zipf_libs
- .DXF file import procedure fixed for DXF files generated by "Windows CAD software"
(with this fix you can now import .DXF files generated by CAD software running under Windows)
- .DXF file import procedure minor bug fixed
- .DXF file import procedure optimized (supports great file dimension)
- Graphics acceleration (also for great model): supports for multiple core CPUs
- "FingerCAD 3D Viewer": better supports for complexes 3D models (Finger3D core integration)
- UNDO for VERTEX EDITING WITH FINGERS functionality (if you have wrong, you can now UNDONE the VERTEX EDITING WITH FINGERS functionality (enabled with EDIT button))
- OBJECTS SNAP routine added (with this feature you can recalculate the objects snapping points, for example when you EDIT one or more objects)
Version Number: 1.73 - Enhancements:
* DROPBOX / iDisk integration (READ remotely stored DXF files):
- read, modify, save (into "FingerCAD project archive") dxf files stored on DROPBOX or iDisk server: You can open dxf file with FingerCAD directly from the DROPBOX or iDisk client for iTouch/iPhone/iPad (FREE) clicking on the "open in" button in the DROPBOX or iDisk client and choose FingerCAD --> the chosen dxf file will be opened automatically by FingerCAD (you can also merge more than one dxf files into the current workspace importing them one after the other from DROPBOX or iDisk - FingerCAD will work in background). It works like the "FingerCAD DXF Archive" but the archive is saved into the DROPBOX or iDisk server
* E-MAIL integration:
- read, modify, save (into "FingerCAD project archive") dxf files from email attachments
* WEB LINK integration:
- read, modify, save (into "FingerCAD project archive") dxf files directly from an internet link
* UNDO:
- undo for select, copy and move (if you have wrong, you can now UNDONE copy or move)
* Import for great dxf file dimension (compatible with the device memory)
Version Number: 1.74 - Enhancements:
* DROPBOX / iDisk integration (UPLOAD modified DXF):
You can now upload dxf files (read from FingerCAD archive, DROPBOX or iDisk servers, E-MAIL, WEB LINK and modified with FingerCAD itself) to DROPBOX or iDisk servers:
load dxf file created by your friend, modify it, save it where you want, copy modified dxf file into a DROPBOX or iDisk shared folder and your friend will have your version of dxf file (all can be done using an internet connection).
* UNDER FINGER PREVIEW FOR CAD PRIMITIVE FIRST VERTEX:
Select a CAD primitive (such as a line) and touch the screen (without dragging your finger) --> the position of touch under finger will be displayed upper left in the screen (into the preview window - it give you the possibility to see the exact position of the first vertex for the chosen CAD primitive, under your finger):
if the position is not correct raise your finger from the screen --> CAD primitive drawing will be aborted by FingerCAD (no one CAD primitive will be drawn);
if the position displayed is correct drag your finger on the screen (to draw the CAD primitive you have chosen) and raise your finger to confirm.
* New and better routine for NEAR VERTEXES AUTOMATIC ACQUISITION
* CAD GRID RANGE increased
* Better fonts
* Minor bug fixed
- .DXF Projects Archive added:
1) store all your DXF projects into FingerCAD Documents folder using "iTunes File Sharing"
2) open "DXF Projects Archive", select your DXF project, import and merge it with current project (You can merge two or more DXF projects with current project workspace)
3) compatibility with FREE objects DXF library: "partLibrary". it includes the following dxf library objects: architecture, electrical, electronics, mechanical, misc, processing, templates, zipf_libs
- .DXF file import procedure fixed for DXF files generated by "Windows CAD software"
(with this fix you can now import .DXF files generated by CAD software running under Windows)
- .DXF file import procedure minor bug fixed
- .DXF file import procedure optimized (supports great file dimension)
- Graphics acceleration (also for great model): supports for multiple core CPUs
- "FingerCAD 3D Viewer": better supports for complexes 3D models (Finger3D core integration)
- UNDO for VERTEX EDITING WITH FINGERS functionality (if you have wrong, you can now UNDONE the VERTEX EDITING WITH FINGERS functionality (enabled with EDIT button))
- OBJECTS SNAP routine added (with this feature you can recalculate the objects snapping points, for example when you EDIT one or more objects)
Version Number: 1.73 - Enhancements:
* DROPBOX / iDisk integration (READ remotely stored DXF files):
- read, modify, save (into "FingerCAD project archive") dxf files stored on DROPBOX or iDisk server: You can open dxf file with FingerCAD directly from the DROPBOX or iDisk client for iTouch/iPhone/iPad (FREE) clicking on the "open in" button in the DROPBOX or iDisk client and choose FingerCAD --> the chosen dxf file will be opened automatically by FingerCAD (you can also merge more than one dxf files into the current workspace importing them one after the other from DROPBOX or iDisk - FingerCAD will work in background). It works like the "FingerCAD DXF Archive" but the archive is saved into the DROPBOX or iDisk server
* E-MAIL integration:
- read, modify, save (into "FingerCAD project archive") dxf files from email attachments
* WEB LINK integration:
- read, modify, save (into "FingerCAD project archive") dxf files directly from an internet link
* UNDO:
- undo for select, copy and move (if you have wrong, you can now UNDONE copy or move)
* Import for great dxf file dimension (compatible with the device memory)
Version Number: 1.74 - Enhancements:
* DROPBOX / iDisk integration (UPLOAD modified DXF):
You can now upload dxf files (read from FingerCAD archive, DROPBOX or iDisk servers, E-MAIL, WEB LINK and modified with FingerCAD itself) to DROPBOX or iDisk servers:
load dxf file created by your friend, modify it, save it where you want, copy modified dxf file into a DROPBOX or iDisk shared folder and your friend will have your version of dxf file (all can be done using an internet connection).
* UNDER FINGER PREVIEW FOR CAD PRIMITIVE FIRST VERTEX:
Select a CAD primitive (such as a line) and touch the screen (without dragging your finger) --> the position of touch under finger will be displayed upper left in the screen (into the preview window - it give you the possibility to see the exact position of the first vertex for the chosen CAD primitive, under your finger):
if the position is not correct raise your finger from the screen --> CAD primitive drawing will be aborted by FingerCAD (no one CAD primitive will be drawn);
if the position displayed is correct drag your finger on the screen (to draw the CAD primitive you have chosen) and raise your finger to confirm.
* New and better routine for NEAR VERTEXES AUTOMATIC ACQUISITION
* CAD GRID RANGE increased
* Better fonts
* Minor bug fixed
1.73
2011年04月28日
Enhancements contained into ver.1.72 :
- .DXF Projects Archive added:
1) store all your DXF projects into FingerCAD Documents folder using "iTunes File Sharing"
2) open "DXF Projects Archive", select your DXF project, import and merge it with current project (You can merge two or more DXF projects with current project workspace)
3) compatibility with FREE objects DXF library: "partLibrary". it includes the following dxf library objects: architecture, electrical, electronics, mechanical, misc, processing, templates, zipf_libs
- .DXF file import procedure fixed for DXF files generated by "Windows CAD software"
(with this fix you can now import .DXF files generated by CAD software running under Windows)
- .DXF file import procedure minor bug fixed
- .DXF file import procedure optimized (supports great file dimension)
- Graphics acceleration (also for great model): supports for multiple core CPUs
- "FingerCAD 3D Viewer": better supports for complexes 3D models (Finger3D core integration)
- UNDO for VERTEX EDITING WITH FINGERS functionality (if you have wrong, you can now UNDONE the VERTEX EDITING WITH FINGERS functionality (enabled with EDIT button))
- OBJECTS SNAP routine added (with this feature you can recalculate the objects snapping points, for example when you EDIT one or more objects)
Enhancements contained into ver.1.73 :
DROPBOX / iDisk integration:
- read, modify, save (into "FingerCAD project archive") dxf files stored on DROPBOX or iDisk server: You can open dxf file with FingerCAD directly from the DROPBOX or iDisk client for iTouch/iPhone/iPad (FREE) clicking on the "open in" button in the DROPBOX or iDisk client and choose FingerCAD --> the chosen dxf file will be opened automatically by FingerCAD (you can also merge more than one dxf files into the current workspace importing them one after the other from DROPBOX or iDisk - FingerCAD will work in background). It works like the "FingerCAD DXF Archive" but the archive is saved into the DROPBOX or iDisk server
E-MAIL integration:
- read, modify, save (into "FingerCAD project archive") dxf files from email attachments
WEB LINK integration:
- read, modify, save (into "FingerCAD project archive") dxf files directly from an internet link
UNDO:
- undo for select, copy and move (if you have wrong, you can now UNDONE copy or move)
- import for great dxf file dimension (compatible with the device memory)
- .DXF Projects Archive added:
1) store all your DXF projects into FingerCAD Documents folder using "iTunes File Sharing"
2) open "DXF Projects Archive", select your DXF project, import and merge it with current project (You can merge two or more DXF projects with current project workspace)
3) compatibility with FREE objects DXF library: "partLibrary". it includes the following dxf library objects: architecture, electrical, electronics, mechanical, misc, processing, templates, zipf_libs
- .DXF file import procedure fixed for DXF files generated by "Windows CAD software"
(with this fix you can now import .DXF files generated by CAD software running under Windows)
- .DXF file import procedure minor bug fixed
- .DXF file import procedure optimized (supports great file dimension)
- Graphics acceleration (also for great model): supports for multiple core CPUs
- "FingerCAD 3D Viewer": better supports for complexes 3D models (Finger3D core integration)
- UNDO for VERTEX EDITING WITH FINGERS functionality (if you have wrong, you can now UNDONE the VERTEX EDITING WITH FINGERS functionality (enabled with EDIT button))
- OBJECTS SNAP routine added (with this feature you can recalculate the objects snapping points, for example when you EDIT one or more objects)
Enhancements contained into ver.1.73 :
DROPBOX / iDisk integration:
- read, modify, save (into "FingerCAD project archive") dxf files stored on DROPBOX or iDisk server: You can open dxf file with FingerCAD directly from the DROPBOX or iDisk client for iTouch/iPhone/iPad (FREE) clicking on the "open in" button in the DROPBOX or iDisk client and choose FingerCAD --> the chosen dxf file will be opened automatically by FingerCAD (you can also merge more than one dxf files into the current workspace importing them one after the other from DROPBOX or iDisk - FingerCAD will work in background). It works like the "FingerCAD DXF Archive" but the archive is saved into the DROPBOX or iDisk server
E-MAIL integration:
- read, modify, save (into "FingerCAD project archive") dxf files from email attachments
WEB LINK integration:
- read, modify, save (into "FingerCAD project archive") dxf files directly from an internet link
UNDO:
- undo for select, copy and move (if you have wrong, you can now UNDONE copy or move)
- import for great dxf file dimension (compatible with the device memory)
1.72
2011年04月14日
- .DXF Projects Archive added:
1) store all your DXF projects into FingerCAD Documents folder using "iTunes File Sharing"
2) open "DXF Projects Archive", select your DXF project, import and merge it with current project (You can merge two or more DXF projects with current project workspace)
3) compatibility with FREE objects DXF library: "partLibrary". it includes the following dxf library objects: architecture, electrical, electronics, mechanical, misc, processing, templates, zipf_libs
- .DXF file import procedure fixed for DXF files generated by "Windows CAD software"
(with this fix you can now import .DXF files generated by CAD software running under Windows)
- .DXF file import procedure minor bug fixed
- .DXF file import procedure optimized (supports great file dimension)
- Graphics acceleration (also for great model): supports for multiple core CPUs
- "FingerCAD 3D Viewer": better supports for complexes 3D models (Finger3D core integration)
- UNDO for VERTEX EDITING WITH FINGERS functionality (if you have wrong, you can now UNDONE the VERTEX EDITING WITH FINGERS functionality (enabled with EDIT button))
- OBJECTS SNAP routine added (with this feature you can recalculate the objects snapping points, for example when you EDIT one or more objects)
1) store all your DXF projects into FingerCAD Documents folder using "iTunes File Sharing"
2) open "DXF Projects Archive", select your DXF project, import and merge it with current project (You can merge two or more DXF projects with current project workspace)
3) compatibility with FREE objects DXF library: "partLibrary". it includes the following dxf library objects: architecture, electrical, electronics, mechanical, misc, processing, templates, zipf_libs
- .DXF file import procedure fixed for DXF files generated by "Windows CAD software"
(with this fix you can now import .DXF files generated by CAD software running under Windows)
- .DXF file import procedure minor bug fixed
- .DXF file import procedure optimized (supports great file dimension)
- Graphics acceleration (also for great model): supports for multiple core CPUs
- "FingerCAD 3D Viewer": better supports for complexes 3D models (Finger3D core integration)
- UNDO for VERTEX EDITING WITH FINGERS functionality (if you have wrong, you can now UNDONE the VERTEX EDITING WITH FINGERS functionality (enabled with EDIT button))
- OBJECTS SNAP routine added (with this feature you can recalculate the objects snapping points, for example when you EDIT one or more objects)
1.71
2010年12月15日
- iOS 4.2
- CAD core optimized and accelerated graphics
- .DXF file import procedure optimized (supports great file dimension)
- .DXF export procedure optimized (supports great files dimension)
- .OBJ 2D and 3D export procedure optimized (supports great files dimension)
- move, copy, rotate, edit, modify, color change procedures optimized
- "FingerCAD 3D Viewer" now supports complexes 3D models (Finger3D core integration)
- Better drawing for small components
- Better auto acquisition for vertexes
- Better zoom with two fingers procedure
- Better "grid snap" indicator
- Distance from line for the measure tool proportional with zoom in/out value
- CAD core optimized and accelerated graphics
- .DXF file import procedure optimized (supports great file dimension)
- .DXF export procedure optimized (supports great files dimension)
- .OBJ 2D and 3D export procedure optimized (supports great files dimension)
- move, copy, rotate, edit, modify, color change procedures optimized
- "FingerCAD 3D Viewer" now supports complexes 3D models (Finger3D core integration)
- Better drawing for small components
- Better auto acquisition for vertexes
- Better zoom with two fingers procedure
- Better "grid snap" indicator
- Distance from line for the measure tool proportional with zoom in/out value
1.70
2010年11月02日
- Image scale control range increased (better scaling for high quality images)
- Possibility to modify selected objects height and quota values (with that feature you can for example extrude imported DXF 2D model and obtain/visualize 3D model with "FingerCAD 3D Viewer")
- Multi-Touch for "FingerCAD 3D Viewer" :
The "Fingers Exploration Core Module" of Finger3D is now part of "FingerCAD 3D Viewer". With this module you can zoom in/out 3D model with two fingers and rotate it up/down/left/right with one finger
This core is implemented using openGL library (it uses the 3D graphics acceleration of the device)
- Generic DXF import procedure optimized
- "OBJ C." button (FingerCAD Settings Window) procedure modified:
1) if no one CAD object is selected --> change color/transparency to all cad objects (new color can be specified by red, green, blue, alpha slider controls - select ALPHA=0 for DOTTED LINE)
2) if some objects are selected --> change color/transparency only for all selected CAD objects (new color can be specified by red, green, blue, alpha slider controls - select ALPHA=0 for DOTTED LINE)
*****************************
A new software update is under development. To all users: if You have problems, advices, if You need more functionalities, please write me at: natalini.gianluca@gmail.com
Thanks to all users for the collaboration.
"The future of FingerCAD is determinated by the needs of users"
*****************************
- Possibility to modify selected objects height and quota values (with that feature you can for example extrude imported DXF 2D model and obtain/visualize 3D model with "FingerCAD 3D Viewer")
- Multi-Touch for "FingerCAD 3D Viewer" :
The "Fingers Exploration Core Module" of Finger3D is now part of "FingerCAD 3D Viewer". With this module you can zoom in/out 3D model with two fingers and rotate it up/down/left/right with one finger
This core is implemented using openGL library (it uses the 3D graphics acceleration of the device)
- Generic DXF import procedure optimized
- "OBJ C." button (FingerCAD Settings Window) procedure modified:
1) if no one CAD object is selected --> change color/transparency to all cad objects (new color can be specified by red, green, blue, alpha slider controls - select ALPHA=0 for DOTTED LINE)
2) if some objects are selected --> change color/transparency only for all selected CAD objects (new color can be specified by red, green, blue, alpha slider controls - select ALPHA=0 for DOTTED LINE)
*****************************
A new software update is under development. To all users: if You have problems, advices, if You need more functionalities, please write me at: natalini.gianluca@gmail.com
Thanks to all users for the collaboration.
"The future of FingerCAD is determinated by the needs of users"
*****************************
1.68
2010年10月25日
- Generic DXF file import procedure (FingerCAD can import DXF file format generated by any CAD software):
DXF primitives import supported:
1: CIRCLE
2: LWPOLYLINE
3: LINE
4: ARC
5: TEXT
6: MTEXT
7: DIMENSION
8: ELLIPSE
- EDIT label coordinate position fixed
- Possibility to write X,Y coordinate for start point of any CAD object:
1. write coordinates X and Y for CAD object stat point
2. drag your finger on the screen to draw object
3. remove the finger from the screen to confirm end point for the object
DXF primitives import supported:
1: CIRCLE
2: LWPOLYLINE
3: LINE
4: ARC
5: TEXT
6: MTEXT
7: DIMENSION
8: ELLIPSE
- EDIT label coordinate position fixed
- Possibility to write X,Y coordinate for start point of any CAD object:
1. write coordinates X and Y for CAD object stat point
2. drag your finger on the screen to draw object
3. remove the finger from the screen to confirm end point for the object
1.66
2010年10月12日
"FINGERCAD DXF IMPORT, ROTATE/SCALE FOR SELECTED OBJECTS, MULTI-TOUCH INTERFACE ( ZOOM WITH TWO FINGERS )" UPDATE:
- iTunes File Sharing (so you can share cad drawing between FingerCAD for iPhone/iTouch and FingerCAD HD for iPad, create a backup copy of your FingerCAD drawing, etc...)
- Muti-touch for zoom in/out: you can zoom in/out using two fingers
- Scale feature for "CAD objects" (increase or decrease dimension for selected object)
- Rotate feature for "CAD object" (rotate clockwise or anticlockwise selected objects)
- Rotate layer (slecting all the objects of the selected layer)
- New RECT tool: rect can now be edited and deformed (from rect to generic polyline of 4 side) correctly, rotated, scaled, etc...
- "HELP/TUTORIALS" pressing "info" button in the "FingerCAD Setting Windows" (it opens a software support URL where you can find the released software users guide)
- Import feature for "FINGERCAD.dxf" file
FINGERCAD DXF IMPORT procedure:
1) connect your device to MAC and open iTunes software
2) into iTunes, click on your device --> Applications
3) click, below in the iTunes Applications window, on FingerCAD --> you can see the files contained in the Document folder of FingerCAD
4) rename the DXF file that you have to import with this name: FINGERCAD.dxf (case sensitive)
5) drag "FINGERCAD.dxf" file into the document folder of FingerCAD (into iTunes - see point 3)
6) run FingerCAD software --> the file FINGERCAD.dxf (your design) will be detected and imported automatically
7) open "FingerCAD Archive Management" to save the imported design into FingerCAD PROJECTS Archive
- iTunes File Sharing (so you can share cad drawing between FingerCAD for iPhone/iTouch and FingerCAD HD for iPad, create a backup copy of your FingerCAD drawing, etc...)
- Muti-touch for zoom in/out: you can zoom in/out using two fingers
- Scale feature for "CAD objects" (increase or decrease dimension for selected object)
- Rotate feature for "CAD object" (rotate clockwise or anticlockwise selected objects)
- Rotate layer (slecting all the objects of the selected layer)
- New RECT tool: rect can now be edited and deformed (from rect to generic polyline of 4 side) correctly, rotated, scaled, etc...
- "HELP/TUTORIALS" pressing "info" button in the "FingerCAD Setting Windows" (it opens a software support URL where you can find the released software users guide)
- Import feature for "FINGERCAD.dxf" file
FINGERCAD DXF IMPORT procedure:
1) connect your device to MAC and open iTunes software
2) into iTunes, click on your device --> Applications
3) click, below in the iTunes Applications window, on FingerCAD --> you can see the files contained in the Document folder of FingerCAD
4) rename the DXF file that you have to import with this name: FINGERCAD.dxf (case sensitive)
5) drag "FINGERCAD.dxf" file into the document folder of FingerCAD (into iTunes - see point 3)
6) run FingerCAD software --> the file FINGERCAD.dxf (your design) will be detected and imported automatically
7) open "FingerCAD Archive Management" to save the imported design into FingerCAD PROJECTS Archive
1.64
2010年09月17日
"SECOND DRAWING PRECISION" UPDATE -> "DESIGN FOR MICRO COMPONENTS(USING ZOOM IN), OBJECTS APPEARENCE CHANGE WITH THE ZOOM, SEE PERFECTLY ALL OBJECTS WITH ANY ZOOM CONDITION (zoom out and zoom in)":
1) The problem "scaling is not good" is now fixed (now you can draw with extreme precision also when zoom in --> micro design feature) - THANKS TO USERS FOR THIS FIX !!!
2) Small line drawing fixed (polyline with small linked line)
3) Polyline drawing also for ARC and CURVE (with polyarc and polycurve you can draw next arc/curve linked together)
4) Polyline for "LINE WITH ANGLE" fixed
5) Black image/wrong frame rendering problem removed (from 3D image to JPG file)
6) Better automatic vertexes acquisition
7) Vertexes indicator now will increase and decrease its dimension proportionally with the use of the zoom
8) Symbol, line width, text and labels now will increase and decrease its dimension proportionally with the use of the zoom
9) Dynamic drawing position pointer preview for line width now will increase and decrease its dimension proportionally with the use of the zoom
10) Pan (up/down/left/right) now will increase and decrease its shift value proportionally with the use of the zoom
NEW DOCUMENTATION AVAILABLE AT URL:
http://www.ngcybit.it/iTunesApp/fingercad/quick-user-guide.html
1) The problem "scaling is not good" is now fixed (now you can draw with extreme precision also when zoom in --> micro design feature) - THANKS TO USERS FOR THIS FIX !!!
2) Small line drawing fixed (polyline with small linked line)
3) Polyline drawing also for ARC and CURVE (with polyarc and polycurve you can draw next arc/curve linked together)
4) Polyline for "LINE WITH ANGLE" fixed
5) Black image/wrong frame rendering problem removed (from 3D image to JPG file)
6) Better automatic vertexes acquisition
7) Vertexes indicator now will increase and decrease its dimension proportionally with the use of the zoom
8) Symbol, line width, text and labels now will increase and decrease its dimension proportionally with the use of the zoom
9) Dynamic drawing position pointer preview for line width now will increase and decrease its dimension proportionally with the use of the zoom
10) Pan (up/down/left/right) now will increase and decrease its shift value proportionally with the use of the zoom
NEW DOCUMENTATION AVAILABLE AT URL:
http://www.ngcybit.it/iTunesApp/fingercad/quick-user-guide.html
1.62
2010年08月26日
"DRAWING PRECISION" UPDATE:
1) the grid can now be set between 10, 5, 2, 1 (um, mm, cm, m, in, ft)
2) "drawing position pointer" (with vertical axis and orizontal axis) also for "EDIT FOR VERTEXES"
3) dynamic circle area indicator for "EDIT FOR VERTEXES" displayed
4) dinamic label for position and length for drawing and vertexes editing now will increase and decrease its dimension proportionally with the use of the zoom
5) line join and line cap rounded
1) the grid can now be set between 10, 5, 2, 1 (um, mm, cm, m, in, ft)
2) "drawing position pointer" (with vertical axis and orizontal axis) also for "EDIT FOR VERTEXES"
3) dynamic circle area indicator for "EDIT FOR VERTEXES" displayed
4) dinamic label for position and length for drawing and vertexes editing now will increase and decrease its dimension proportionally with the use of the zoom
5) line join and line cap rounded
1.60
2010年08月17日
- BACKGROUND COLOR can now be changed with all the colors you want (RGB selection). For example, your design can be black on white background.
- All "objects color" can be changed with one click (you can change its color chosing a new RGB color for the entire design)
- VERTEX EDITING TOOL added. When is enabled ("ON") with your finger you can:
- change the positions of the object's vertexes
- change for example the middle point of a line to another point of the same line or the extreme point of a rect etc. (this new points will be "new magnetic points" for automatic vertex acquiring)
- if you move a vertex near another one, the second vertex will be linked to the first and will be moved together (closing and moving together)
- change the angle/position of a wall (moving the angle vertex with your finger)
- align surfaces
- modify all CAD objects with your finger
- "CURVE - DRAWING TOOL" added (you can draw curves in the space and you can modify them with your finger using "VERTEX EDITING TOOL"; with this "curve tool" you can draw also walls or surfaces in the space, with any shape you want)
- EXPORT for CURVES AND SURFACES as .OBJ 2D, .OBJ 3D, .DXF
- Correct "virtual vertex position" initialization for wall drawing
- Increased font dimensions for text, measure, drawing label position and dimensions indicator
- Better control for "image scale"
- "Dotted line" selecting alpha = 0.0
- "UNDERGROUND BUILDING DESIGN" (object with height < 0.0 - you can draw underground building floors)
- All "objects color" can be changed with one click (you can change its color chosing a new RGB color for the entire design)
- VERTEX EDITING TOOL added. When is enabled ("ON") with your finger you can:
- change the positions of the object's vertexes
- change for example the middle point of a line to another point of the same line or the extreme point of a rect etc. (this new points will be "new magnetic points" for automatic vertex acquiring)
- if you move a vertex near another one, the second vertex will be linked to the first and will be moved together (closing and moving together)
- change the angle/position of a wall (moving the angle vertex with your finger)
- align surfaces
- modify all CAD objects with your finger
- "CURVE - DRAWING TOOL" added (you can draw curves in the space and you can modify them with your finger using "VERTEX EDITING TOOL"; with this "curve tool" you can draw also walls or surfaces in the space, with any shape you want)
- EXPORT for CURVES AND SURFACES as .OBJ 2D, .OBJ 3D, .DXF
- Correct "virtual vertex position" initialization for wall drawing
- Increased font dimensions for text, measure, drawing label position and dimensions indicator
- Better control for "image scale"
- "Dotted line" selecting alpha = 0.0
- "UNDERGROUND BUILDING DESIGN" (object with height < 0.0 - you can draw underground building floors)
1.58
2010年08月16日
- "AutoSet" on "orizontal plane" for "end point height from the ground" and "end point height" (their values, if desidered, can be modified manually)
- "PREVIOUS LAYER PREVIEW" feature: "layer number-1" preview visualized on selected layer
- "FLOOR HEIGHT" feature (you can select the height of the building floors)
- "LAYER AS A FLOOR" feature: with this feature you can design building (with many floors):
1) For example you can draw a floor on a layer and, at the end, you can render the complete building simple selecting "LAYERS : ALL" and using "FingerCAD 3D VIEWER";
2) You can draw a layer and copy it on another layer; so, if the floor of the building are all the same the design of the entire building is very simple:
- draw a floor on a layer (ex. layer 1)
- select another layer (ex. layer 2)
- set the "FLOOR#" as 2 for the layer 2
- click on "PREVIOUS LAYER" button to display "layer 1" in "layer 2"
- select all the objects of "layer 1"
- set "COPY DISTANCE" as 0
- copy on layer 2 (the "layer 1" will be copied on layer 2 at the floor number 2 - at the "HEIGHT" of the floor number 2)
- repeat the steps for all the building floors (layers)
- select "LAYERS: ALL"
- use "FingerCAD 3D Viewer" to render the building
- to render only one building floor select the desidered layer and render it with "FingerCAD 3D Viewer"
- "PREVIOUS LAYER PREVIEW" feature: "layer number-1" preview visualized on selected layer
- "FLOOR HEIGHT" feature (you can select the height of the building floors)
- "LAYER AS A FLOOR" feature: with this feature you can design building (with many floors):
1) For example you can draw a floor on a layer and, at the end, you can render the complete building simple selecting "LAYERS : ALL" and using "FingerCAD 3D VIEWER";
2) You can draw a layer and copy it on another layer; so, if the floor of the building are all the same the design of the entire building is very simple:
- draw a floor on a layer (ex. layer 1)
- select another layer (ex. layer 2)
- set the "FLOOR#" as 2 for the layer 2
- click on "PREVIOUS LAYER" button to display "layer 1" in "layer 2"
- select all the objects of "layer 1"
- set "COPY DISTANCE" as 0
- copy on layer 2 (the "layer 1" will be copied on layer 2 at the floor number 2 - at the "HEIGHT" of the floor number 2)
- repeat the steps for all the building floors (layers)
- select "LAYERS: ALL"
- use "FingerCAD 3D Viewer" to render the building
- to render only one building floor select the desidered layer and render it with "FingerCAD 3D Viewer"
1.56
2010年08月09日
- Possibility to load an image from photo albums (you can acquire it with the photo camera) and:
- Scale it to fit on design
- Place a "CAD object" over the scaled image
- Use the image as background of your design (design on a picture)
- Take a snapshot of an object in the world with your photo camera and insert over it the measure (using measure tool or line and free text for measure - useful for take a note about the measure of an object)
- Use the background image to help yourself in your design (copy from an image or from an existing CAD design)
- Image can be loaded and removed when you want (image loading and release)
- Projects Management (projects archives):
- You can save an infinite number of projects
- You can load an existing project (saved in previous session of work)
- You can load an existing project and merge it to current project (the two projects will be visualized together in current project)
- You can delete the projects not desidered
- 3D Rendering:
- You can now render the design visualized in "FingerCAD 3D Viewer", save it into "Photo Albums", send it by email as a JPG file
- Free text font dimension increased
- Scale it to fit on design
- Place a "CAD object" over the scaled image
- Use the image as background of your design (design on a picture)
- Take a snapshot of an object in the world with your photo camera and insert over it the measure (using measure tool or line and free text for measure - useful for take a note about the measure of an object)
- Use the background image to help yourself in your design (copy from an image or from an existing CAD design)
- Image can be loaded and removed when you want (image loading and release)
- Projects Management (projects archives):
- You can save an infinite number of projects
- You can load an existing project (saved in previous session of work)
- You can load an existing project and merge it to current project (the two projects will be visualized together in current project)
- You can delete the projects not desidered
- 3D Rendering:
- You can now render the design visualized in "FingerCAD 3D Viewer", save it into "Photo Albums", send it by email as a JPG file
- Free text font dimension increased
FingerCAD 價格
今日:
HK$ 22.00
最低價格:
HK$ 22.00
最高價格:
HK$ 23.00
FingerCAD FAQ
點擊此處瞭解如何在受限國家或地區下載FingerCAD。
以下為FingerCAD的最低配置要求。
iPhone
須使用 iOS 16.0 或以上版本。
FingerCAD支持英文
