HDL Control
Free
2.4.9for iPhone, iPad
Age Rating
HDL Control 螢幕截圖
About HDL Control
This app allows you to control your HDL lighting / automation system. HDL authorised dealers / installers will install & commission your system and this app will then control your lighting, blinds etc.
You can also use the app to control AV equipment using a DemoPad Centro-C IP gateway or a Global Caché IP2IR, see www.demopad.com for more information
Contact your local HDL dealer for more information.
You can also use the app to control AV equipment using a DemoPad Centro-C IP gateway or a Global Caché IP2IR, see www.demopad.com for more information
Contact your local HDL dealer for more information.
Show More
最新版本2.4.9更新日誌
Last updated on 2019年01月04日
歷史版本
• Fix feedback for Curtain Controls
Show More
Version History
2.4.9
2019年01月04日
• Fix feedback for Curtain Controls
2.4.8
2018年11月19日
• Improved status requests. Device status will now only be requested once every 15 minutes. This can be modified or disabled in the settings.
2.4.7
2018年11月01日
• Fix crash when selecting an AV User Interface/Command Set
2.4.6
2018年08月01日
• Added support for lighting schedules with the HDL-Server-DIN.
• Added option in iOS Settings to disable Remote Access.
• Added option in iOS Settings to disable Remote Access.
2.4.5
2018年07月30日
• Added support for the CoolMasterNet for HVAC.
2.4.4
2018年07月23日
• Added support for the HDL-Server-DIN.
• Fixed an issue where the 'spinner' could get stuck and interrupt setup.
• Fixed an issue where the 'spinner' could get stuck and interrupt setup.
2.4.3
2018年06月27日
• Added better feedback for curtain/shade controls.
• Added the ability for Shade controls to be added to scenes, global scenes and thus can now be programmed to a keypad.
• Fixed a bug where feedback on global scenes wouldn't be correct.
• Added the ability for Shade controls to be added to scenes, global scenes and thus can now be programmed to a keypad.
• Fixed a bug where feedback on global scenes wouldn't be correct.
2.3.98
2018年05月02日
• Changes for when the HDL IP Gateway may be unable to process lots of commands.
2.3.97
2018年04月17日
• Added the ability for Heating to be added to Scenes (Global and In-Room). Therefore, any keypads can now be programmed to include heating also.
2.3.96
2018年04月10日
• Added the ability to disable writing DLP icons.
• Added the ability for one icon to be applied to both the ON and OFF states of a DLP panel.
• Fixed a bug where a blank graphic had to be chosen before text could be applied to a DLP icon.
• Fixed an issue where updated scenes could be incorrectly written to keypads.
• Added the ability for one icon to be applied to both the ON and OFF states of a DLP panel.
• Fixed a bug where a blank graphic had to be chosen before text could be applied to a DLP icon.
• Fixed an issue where updated scenes could be incorrectly written to keypads.
2.3.95
2018年03月11日
• Added an option in iOS Settings to disable Cloud-Upload on a per-device basis.
• Added a confirmation message if the user tries to overwrite a more up-to-date cloud copy.
• Fixed scene highlighting.
• Fixed an issue where adjusting DMX channels wouldn't take into account the default fade time.
• Fixed an issue where lights could be shown as 'on' in an area even if the lights were off.
• Fixed a crash when using the QR code reader.
• Fixed an issue where projects wouldn't sync properly when room images changed.
• Added a confirmation message if the user tries to overwrite a more up-to-date cloud copy.
• Fixed scene highlighting.
• Fixed an issue where adjusting DMX channels wouldn't take into account the default fade time.
• Fixed an issue where lights could be shown as 'on' in an area even if the lights were off.
• Fixed a crash when using the QR code reader.
• Fixed an issue where projects wouldn't sync properly when room images changed.
2.3.94
2018年02月21日
• Changed feedback rules to set Circuits to ON even if feedback isn't received for all linked channels but at least one is set to ON.
• Changes to Logging to diagnose issues easier.
• Changes to Logging to diagnose issues easier.
2.3.93
2018年02月19日
• Fixed an issue where communication could be lost with the HDL Gateway
2.3.8
2018年01月25日
• Fixed an issue where heating controls could 'flicker' if there are more than one per room.
2.3.7
2018年01月16日
• Added the ability to change the Remote Access Delay (Settings > Other Settings > Miscellaneous Settings). This is to resolve an issue where systems could connect remotely when actually on the local network.
2.3.6
2018年01月11日
• Added the ability to add multiple IP gateways. This makes remote access available on systems with multiple subnets. Commands can therefore be sent directly to the gateway for a given subnet instead of using the broadcast address.
2.3.5
2017年11月17日
• Urgent Remote Access Fix
2.3.4
2017年11月15日
• Added the ability to set which heating modes are available for a given heating control.
• Fixed the issue of deleting Lighting, Heating, and Curtain controls.
• Fixed various issues related to the release of iOS 11 including crashes when using AV interfaces.
• Changed the method of establishing remote system connections.
• Resolved crashes when switching between multiple systems with remote access enabled.
• Fixed issue on iPhone where AV Interfaces would slide off screen when the device is rotated.
• Fixed issue with Heating Controls where Set Point temperature couldn't be set properly.
• If returning to the app from the lock screen, room state is now updated.
• Fixed the issue of deleting Lighting, Heating, and Curtain controls.
• Fixed various issues related to the release of iOS 11 including crashes when using AV interfaces.
• Changed the method of establishing remote system connections.
• Resolved crashes when switching between multiple systems with remote access enabled.
• Fixed issue on iPhone where AV Interfaces would slide off screen when the device is rotated.
• Fixed issue with Heating Controls where Set Point temperature couldn't be set properly.
• If returning to the app from the lock screen, room state is now updated.
2.3.3
2017年09月13日
• URGENT: Fixed issue with system not communicating with Gateway or AV equipment.
• Fixed issue of delays being added to relay channels.
• Fixed issue with Relays being programmed as 255.
• Improved reliability of app crashing when changing systems - particularly when using remote access.
• Fixed issue of delays being added to relay channels.
• Fixed issue with Relays being programmed as 255.
• Improved reliability of app crashing when changing systems - particularly when using remote access.
2.3.2
2017年08月16日
• Changed the way UV Switches are controlled. The app will no longer automatically send the 'OFF' command.
• Many people have said the On/Off icons for Heating controls aren't clear. On/Off is now displayed as Green/Red.
• Fixed a bug that meant the latest 'device database' wasn't shipping with the App store release.
• Many people have said the On/Off icons for Heating controls aren't clear. On/Off is now displayed as Green/Red.
• Fixed a bug that meant the latest 'device database' wasn't shipping with the App store release.
2.3.1
2017年07月05日
Added the ability for IP Devices to disconnect after sending each command.
2.3.0
2017年05月26日
Minor Update.
2.2.9
2017年03月22日
Remote Access Fixes
2.2.8
2017年03月09日
Font Adjustments
2.2.7
2017年02月23日
Simplified the adding of Blustream Products.
Added support for the new Centro-CM and 8M.
Added Scaling for iPhone AV User Interfaces.
Added the Name label for Heating Controls.
Added support for the new Centro-CM and 8M.
Added Scaling for iPhone AV User Interfaces.
Added the Name label for Heating Controls.
HDL Control FAQ
點擊此處瞭解如何在受限國家或地區下載HDL Control。
以下為HDL Control的最低配置要求。
iPhone
iPad
HDL Control支持Chinese, English, French, German, Portuguese, Russian, Spanish