LogiCO2-Sniffer
免費
2.2for iPhone, iPod touch
Age Rating
LogiCO2-Sniffer 螢幕截圖
About LogiCO2-Sniffer
The LogiCO2 Sniffer is a product that communicates CO2 measurement values from LogiCO2’s CO2
Safety Systems, to Smartphones.
The LogiCO2 Sniffer is compatible to the Mk7, Mk9 and Mk10 CO2 sensor.
The LogiCO2 Sniffer can be connected to a CO2 Safety System that has a Central Unit or has “stand
alone” CO2 sensors. It is connected through the “red” RJ45 cable that both powers and
communicates with the LogiCO2 Sniffer.
The LogiCO2 Sniffer can monitor CO2 Safety Systems with up to eight sensors.
Install the LogiCO2 Sniffer App. and you are ready to receive the measurements from the Sniffer.
The LogiCO2 Sniffer is a beacon that broadcasts the measurements to all smartphones within range
of the Bluetooth signal that currently are running the Sniffer-App. You need to scan for sensor signals
from the Sniffer and have the App running. Have the Bluetooth enabled on your smartphone.
The LogiCO2 Sniffer is a one way signal device, in other words the sniffers function can not
compromise the functionality of the LogiCO2 Safety System. You can only read out the
measurements.
The LogiCO2 Sniffer also logs the last two weeks of measured values for added safety. The last two
weeks measurements are stored. Both the CO2 concentration (STEL) and the TWA value (PEL – Time
Weighted Average) are stored every 15 minutes. To read out the logger in the App. you must have
access to the Sniffer device.
Safety Systems, to Smartphones.
The LogiCO2 Sniffer is compatible to the Mk7, Mk9 and Mk10 CO2 sensor.
The LogiCO2 Sniffer can be connected to a CO2 Safety System that has a Central Unit or has “stand
alone” CO2 sensors. It is connected through the “red” RJ45 cable that both powers and
communicates with the LogiCO2 Sniffer.
The LogiCO2 Sniffer can monitor CO2 Safety Systems with up to eight sensors.
Install the LogiCO2 Sniffer App. and you are ready to receive the measurements from the Sniffer.
The LogiCO2 Sniffer is a beacon that broadcasts the measurements to all smartphones within range
of the Bluetooth signal that currently are running the Sniffer-App. You need to scan for sensor signals
from the Sniffer and have the App running. Have the Bluetooth enabled on your smartphone.
The LogiCO2 Sniffer is a one way signal device, in other words the sniffers function can not
compromise the functionality of the LogiCO2 Safety System. You can only read out the
measurements.
The LogiCO2 Sniffer also logs the last two weeks of measured values for added safety. The last two
weeks measurements are stored. Both the CO2 concentration (STEL) and the TWA value (PEL – Time
Weighted Average) are stored every 15 minutes. To read out the logger in the App. you must have
access to the Sniffer device.
Show More
最新版本2.2更新日誌
Last updated on 2022年05月30日
歷史版本
Bug fixes
Show More
Version History
2.2
2022年05月30日
Bug fixes
2.0
2022年04月20日
Bug fixes
1.1
2018年05月16日
This app has been updated by Apple to display the Apple Watch app icon.
* bug fixes
* bug fixes
1.0
2017年10月26日
LogiCO2-Sniffer FAQ
點擊此處瞭解如何在受限國家或地區下載LogiCO2-Sniffer。
以下為LogiCO2-Sniffer的最低配置要求。
iPhone
須使用 iOS 13.0 或以上版本。
iPod touch
須使用 iOS 13.0 或以上版本。