MP8000
免費
6.13.1for iPhone, iPad and more
Age Rating
MP8000 螢幕截圖
About MP8000
Monitor and control the MP8000 Bluetooth® Overload Relay on your Apple® device. Use the MP8000 app to configure the relay, view real-time data, and troubleshoot fault codes via a Bluetooth interface in the relay. No need to open the control panel. Keeping the panel door closed, keeps workers safer from the dangers of arc flash. The app has a range of 30 feet so workers can stay far away from the panel and can even stay in their vehicle in remote applications.
* Easily pair multiple MP8000 Relays to your Apple® device
* Stand next to the motor or pump – not the relay – to monitor equipment startup on new installations
* Improve safety: monitor your motor or pump from 30 feet away
* Reduce set up time with less wiring
PAIRING
Pairing is safe and secure. Pair with Apple® iPhone® or iPad® (version 7.0 and higher) smartphone or tablet. A unique pairing code is printed on the side label found on the MP8000 relay.
MP8000 RELAY
The MP8000 enhanced overload relay protects any motor drawing 0.5-1,000 full load Amps (external CTs are required above 100 Amps). It is designed for single or 3-phase systems with operating voltages of 90-690 VAC (use of external potential transformers can extend upper voltage range above 690 VAC). Common applications include conveyor systems, HVAC equipment, saws and grinders, fan motors, and almost any pumping application.
PROTECTION FROM
* Overload (Overpower)
* Underload (Underpower)
* Overcurrent/Jam
* Undercurrent
* Current Unbalance
* Phase Loss
* Phase Reversal
* Overvoltage
* Undervoltage
* Voltage Unbalance
* Rapid Cycling/Jog
* Contactor Failure
* Zero-Sequence Ground Fault
* PTC Motor Overtemperature
WHAT CUSTOMERS ARE SAYING
“This is a HUGE opportunity. During a new installation, I can be right next to the motor at start up to see if it’s binding (or other problems) and shut it off immediately”
* Easily pair multiple MP8000 Relays to your Apple® device
* Stand next to the motor or pump – not the relay – to monitor equipment startup on new installations
* Improve safety: monitor your motor or pump from 30 feet away
* Reduce set up time with less wiring
PAIRING
Pairing is safe and secure. Pair with Apple® iPhone® or iPad® (version 7.0 and higher) smartphone or tablet. A unique pairing code is printed on the side label found on the MP8000 relay.
MP8000 RELAY
The MP8000 enhanced overload relay protects any motor drawing 0.5-1,000 full load Amps (external CTs are required above 100 Amps). It is designed for single or 3-phase systems with operating voltages of 90-690 VAC (use of external potential transformers can extend upper voltage range above 690 VAC). Common applications include conveyor systems, HVAC equipment, saws and grinders, fan motors, and almost any pumping application.
PROTECTION FROM
* Overload (Overpower)
* Underload (Underpower)
* Overcurrent/Jam
* Undercurrent
* Current Unbalance
* Phase Loss
* Phase Reversal
* Overvoltage
* Undervoltage
* Voltage Unbalance
* Rapid Cycling/Jog
* Contactor Failure
* Zero-Sequence Ground Fault
* PTC Motor Overtemperature
WHAT CUSTOMERS ARE SAYING
“This is a HUGE opportunity. During a new installation, I can be right next to the motor at start up to see if it’s binding (or other problems) and shut it off immediately”
Show More
最新版本6.13.1更新日誌
Last updated on 2022年06月17日
歷史版本
updates to keep app up-to-date with latest os, system and app store requirements.
Show More
Version History
6.13.1
2022年06月17日
updates to keep app up-to-date with latest os, system and app store requirements.
6.12.6
2020年08月31日
Link to online MP8000 manual included and other small bug fixes.
6.8.6
2020年06月10日
• Added new device information tab in settings menu
• Updated UI Display
• Add Compatibility with MP8000 firmware version 3.11.20.20 and newer
• Updated UI Display
• Add Compatibility with MP8000 firmware version 3.11.20.20 and newer
3.1
2017年08月08日
Fixed refresh issue in advertising screen and back navigation issue in RTD detail screen.
Fixed faults loading issue and pairing with device issue.
Fixed issue with navigating to devices list when device disconnect.
Added license agreement feature.
Implemented functionality back button functionality i.e. navigate to real-time screen from configuration and faults screen when back button is clicked.
Implemented refresh functionality in faults screen.
Updated text from FWUpdate to FWU.
Fixed issues reported by QA and Mark. Implemented text change for button and added fault code 4096.
Added missing app icons.
Fixed faults loading issue and pairing with device issue.
Fixed issue with navigating to devices list when device disconnect.
Added license agreement feature.
Implemented functionality back button functionality i.e. navigate to real-time screen from configuration and faults screen when back button is clicked.
Implemented refresh functionality in faults screen.
Updated text from FWUpdate to FWU.
Fixed issues reported by QA and Mark. Implemented text change for button and added fault code 4096.
Added missing app icons.
3.0
2017年03月16日
This version contains bug fixes of v2.0 and new app icon for the app.
1.0
2017年02月24日
MP8000 FAQ
點擊此處瞭解如何在受限國家或地區下載MP8000。
以下為MP8000的最低配置要求。
iPhone
須使用 iOS 13.0 或以上版本。
iPad
須使用 iPadOS 13.0 或以上版本。
iPod touch
須使用 iOS 13.0 或以上版本。
MP8000支持英文