Teradek Bolt
Bolt Manager for Teradek Bolts
免費
1.6.4for iPhone, iPad and more
Age Rating
Teradek Bolt 螢幕截圖
About Teradek Bolt
Bolt Manager App
Manage every parameter of your Bolt 4K from the convenience of your smartphone. Pair units, update firmware, and configure all of Bolt 4K’s features (including spectrum analyzer, range finder, etc.) remotely and save time in production.
Pairing - Pair transmitters and receivers right from your iPhone or iPad.
Spectrum Analyzer - Bolt 4K receivers include a built-in 5GHz spectrum analyzer, allowing you to detect congestion in the area and determine which frequency offers the best performance your devices.
Channel Selection - Manually select the 5GHz channel that’s best for your area or to abide by local wireless laws. Bolt 4K can also be set to operate over the 20MHz frequency for better wireless performance.
Quality/Range Analyzer - See additional video quality and information about the distance between connected devices.
Better understanding of range between Tx and Rx. Display more information about environment and distance between connected devices. Gives more information about signal quality, video quality and range between devices. Doesn’t tell you what the best signal is.
3D LUT Selection - Achieve the look you’re after with Bolt’s integrated 3D LUT technology. Select from LUT presets or upload your own into the app.
Quality Selection - Choose between Maximum Quality, Maximum Range and Balanced. This allows you to set your devices to operate just as you need them to on set.
Broadcast Mode - Increase transmission and prevent multiple receivers from interfering with each other when placed close together.
Currently, broadcast mode can increase broadcast range
Output Format - Select the resolution and framerate of the video output in your Bolt receiver.
Test Pattern - Output a test pattern from your Bolt receiver.
Audio Settings - Enable a tone to ring when camera recording is triggered, or mute sounds from the Bolt.
Display Settings - Adjust the lights on Bolt’s LCD display.
System Info - Check the current firmware version and apply updates when available. Also perform factory resets directly from the app.
Manage every parameter of your Bolt 4K from the convenience of your smartphone. Pair units, update firmware, and configure all of Bolt 4K’s features (including spectrum analyzer, range finder, etc.) remotely and save time in production.
Pairing - Pair transmitters and receivers right from your iPhone or iPad.
Spectrum Analyzer - Bolt 4K receivers include a built-in 5GHz spectrum analyzer, allowing you to detect congestion in the area and determine which frequency offers the best performance your devices.
Channel Selection - Manually select the 5GHz channel that’s best for your area or to abide by local wireless laws. Bolt 4K can also be set to operate over the 20MHz frequency for better wireless performance.
Quality/Range Analyzer - See additional video quality and information about the distance between connected devices.
Better understanding of range between Tx and Rx. Display more information about environment and distance between connected devices. Gives more information about signal quality, video quality and range between devices. Doesn’t tell you what the best signal is.
3D LUT Selection - Achieve the look you’re after with Bolt’s integrated 3D LUT technology. Select from LUT presets or upload your own into the app.
Quality Selection - Choose between Maximum Quality, Maximum Range and Balanced. This allows you to set your devices to operate just as you need them to on set.
Broadcast Mode - Increase transmission and prevent multiple receivers from interfering with each other when placed close together.
Currently, broadcast mode can increase broadcast range
Output Format - Select the resolution and framerate of the video output in your Bolt receiver.
Test Pattern - Output a test pattern from your Bolt receiver.
Audio Settings - Enable a tone to ring when camera recording is triggered, or mute sounds from the Bolt.
Display Settings - Adjust the lights on Bolt’s LCD display.
System Info - Check the current firmware version and apply updates when available. Also perform factory resets directly from the app.
Show More
最新版本1.6.4更新日誌
Last updated on 2024年05月16日
歷史版本
Bug Fixes:
- Exclude some devices from firmware version checks
Changes/Improvements:
- Return to device browser after updating device BLE firmware
- Exclude some devices from firmware version checks
Changes/Improvements:
- Return to device browser after updating device BLE firmware
Show More
Version History
1.6.4
2024年05月16日
Bug Fixes:
- Exclude some devices from firmware version checks
Changes/Improvements:
- Return to device browser after updating device BLE firmware
- Exclude some devices from firmware version checks
Changes/Improvements:
- Return to device browser after updating device BLE firmware
1.6.3
2024年05月13日
New Features:
- Add support for new Bolt devices
- Add support for new Bolt devices
1.6.2
2024年04月09日
Changes/Improvements:
- Updated device display name
- Added new device images
- Updated device display name
- Added new device images
1.6.1
2024年02月22日
Bug Fixes:
- Fix wrong model being shown
- Fix wrong model being shown
1.6.0
2024年02月20日
New Features:
- Added support for Japan 6GHz
Bug Fixes:
- Fix device browser UI not showing correct models
- Added support for Japan 6GHz
Bug Fixes:
- Fix device browser UI not showing correct models
1.5.14
2023年11月22日
New Features:
- Added support for new Bolt devices
Bug Fixes:
- Fix BLE upgrade
- Added support for new Bolt devices
Bug Fixes:
- Fix BLE upgrade
1.5.13
2023年09月18日
New Features:
- Add support for EU regions
- Add support for EU regions
1.5.12
2023年05月16日
Bug Fixes:
- Fix duplicate devices in device browser
- Fix duplicate devices in device browser
1.5.11
2023年05月05日
Changes/Improvements:
- Redesign device browser UI
Bug Fixes:
- Remove Bandwidth label on Receiver Status when Bandwidth is in AUTO mode
- Enabling and disabling the Fixed Freq. mode App does not refresh and update Bandwidth option
- Fix wrong linked TX name displayed for RX
- Redesign device browser UI
Bug Fixes:
- Remove Bandwidth label on Receiver Status when Bandwidth is in AUTO mode
- Enabling and disabling the Fixed Freq. mode App does not refresh and update Bandwidth option
- Fix wrong linked TX name displayed for RX
1.5.10
2023年02月07日
Bug Fixes:
- Show quality value on dashboard only when device is connected
- Fix logic to check for outdated firmware versions
- Show quality value on dashboard only when device is connected
- Fix logic to check for outdated firmware versions
1.5.9
2023年01月23日
Changes/Improvements:
- Check radio firmware when prompting for outdated firmware
- Improved pairing process
- Show receiving status when out of range
Bug Fixes:
- Fix outdated firmware prompt after switching between devices
- Don't prompt for region changes if device is Ranger Spark or Orbit
- Hide Region status if device is Ranger
- Check radio firmware when prompting for outdated firmware
- Improved pairing process
- Show receiving status when out of range
Bug Fixes:
- Fix outdated firmware prompt after switching between devices
- Don't prompt for region changes if device is Ranger Spark or Orbit
- Hide Region status if device is Ranger
1.5.8
2022年10月27日
Changes / Improvements:
- Add Low Power quality option to Bolt 6 devices
- Add Low Power quality option to Bolt 6 devices
1.5.7
2022年10月20日
Changes / Improvements:
- Updated Region UI for Bolt 6
- Updated graph library
- Updated Region UI for Bolt 6
- Updated graph library
1.5.6
2022年10月07日
Bug Fixes:
- Fixed invalid frequencies being shown in graph
- Broadcast mode detail label was not showing on some screens
- Fixed invalid frequencies being shown in graph
- Broadcast mode detail label was not showing on some screens
1.5.5
2022年10月04日
Changes / Improvements:
- Show 6Gz band selection for Bolt 4K LT HDMI
- Add missing Bolt 6 devices
- Show broadcast mode as detail VC
- Added broadcast mode setting for tx Max devices ( And ranger 4k )
- Removed "licensed" label for 6GHZ Band Frequency list
- Hide Region Cell when Region is 0 or 1 ( 5 or 6 GHz )
- Show region UI on Bolt 6 when 5Ghz band is selected
- Show only USA or Canada on Region selection page
- Send region selection every time a new region is selected
Bug Fixes:
- Fixed wrong frequencies being selected from app
- Remove 3D LUTS option for Bolt 4K LT HDMI RX
- Hide Camera Recording UI from Spark and Bolt 4K LT HDMI encoders and decoders
- Update RX video reception status
- Updated RX network status
- Update the outdated FW text for launchpad app
- Fixed Canada Band selection reverting to USA
- Fixed wrong frequency list shown on USA and Canada 6G
- Fixed 6G frequency list for Canada region
- Fixed UI Updates on Band selection
- Show 6Gz band selection for Bolt 4K LT HDMI
- Add missing Bolt 6 devices
- Show broadcast mode as detail VC
- Added broadcast mode setting for tx Max devices ( And ranger 4k )
- Removed "licensed" label for 6GHZ Band Frequency list
- Hide Region Cell when Region is 0 or 1 ( 5 or 6 GHz )
- Show region UI on Bolt 6 when 5Ghz band is selected
- Show only USA or Canada on Region selection page
- Send region selection every time a new region is selected
Bug Fixes:
- Fixed wrong frequencies being selected from app
- Remove 3D LUTS option for Bolt 4K LT HDMI RX
- Hide Camera Recording UI from Spark and Bolt 4K LT HDMI encoders and decoders
- Update RX video reception status
- Updated RX network status
- Update the outdated FW text for launchpad app
- Fixed Canada Band selection reverting to USA
- Fixed wrong frequency list shown on USA and Canada 6G
- Fixed 6G frequency list for Canada region
- Fixed UI Updates on Band selection
1.5.4
2022年01月28日
Bug Fixes:
- Fix a crash when upgrading BLE
- Hide camera recording for Cine7 devices
- Show 3D LUT settings for Bolt4K LT RX
- Remove Range when Bolt is in broadcast mode
Improvements:
- Better handling of UI elements
- UI styling for iOS 15
- Fix a crash when upgrading BLE
- Hide camera recording for Cine7 devices
- Show 3D LUT settings for Bolt4K LT RX
- Remove Range when Bolt is in broadcast mode
Improvements:
- Better handling of UI elements
- UI styling for iOS 15
1.5.3
2021年11月04日
Changes / Improvements:
- Add back 3D LUT Settings for Bolt 4K LT Rx devices
- Add back 3D LUT Settings for Bolt 4K LT Rx devices
1.5.2
2021年08月09日
Changes / Improvements:
- Updated support for Cine7 Bolt Tx and Rx Modules
- Updated support for Cine7 Bolt Tx and Rx Modules
1.5.1
2021年08月02日
Changes / Improvements:
- Add support for Cine7 1500 Bolt Tx and Rx
- Add support for Cine7 1500 Bolt Tx and Rx
1.5.0
2021年05月25日
Changes / Improvements:
- Add support for Cine7 Bolt Tx
- Add support for Cine7 Bolt Tx
1.4.0
2020年10月20日
Bug Fix:
- Fix BLE firmware upgrade issue
- Fix BLE firmware upgrade issue
1.3.0
2020年03月26日
Changes / Improvements:
- Add fixed frequency support for receivers
Bug Fix:
- Fix BLE upgrade missing package issue
- Add fixed frequency support for receivers
Bug Fix:
- Fix BLE upgrade missing package issue
1.2.0
2020年01月27日
Changes / Improvements:
- Add BLE Pin code support
- Update channel frequency table
- Add BLE Pin code support
- Update channel frequency table
1.1.0
2019年11月12日
Changes / Improvements:
- Add Bolt 4K Max support
- Improved Tx / Rx Pairing
- Add Bolt 4K Max support
- Improved Tx / Rx Pairing
1.0.0
2019年07月11日
Teradek Bolt FAQ
點擊此處瞭解如何在受限國家或地區下載Teradek Bolt。
以下為Teradek Bolt的最低配置要求。
iPhone
須使用 iOS 13.2 或以上版本。
iPad
須使用 iPadOS 13.2 或以上版本。
iPod touch
須使用 iOS 13.2 或以上版本。
Teradek Bolt支持英文