TMC Alarm +

- App notification badges are now only impacted by security event notifications.
- Additional indicators and decorations have been added to clarify the event notifications and guide users where to go to clear them.
- Update for arm modifiers (arm silent, no entry delay) for a specific panel type.
- Fix for video camera clip access on some camera types.
- Updated some user prompts to better reflect the condition of the account.
- Misc updates and fixes.

- Chatty zones will now be indicated along with other zone issues.
- Badge support added for security system events.
- Critical notification support added.
- Fixed live view crash.
- Added support for silence trouble beeps on certain panels.
- Z-Wave thermostat controls updated for all known system modes.
- Added Spanish support.
- Trouble conditions for the Touchpad should now show the correct touchpad hardware ID.
- Resolved an issue where doorbell press notifications didn't contain a thumbnail.
- Added support for BAT-Mini.
- Added support for Heat sensors on certain panels.
- Cleared type ahead after selecting a zone token on certain panels.
- Added time sensitivity notification support.
- Improved chat notifications to better to more accurately inform the user of the sender.
- Resolved an issue that prevented the New User form from being scrollable at times.
- Fixed a bug that causes issues with FaceID permissions.
- Fixed a crash that could occur when using the Suggest button while changing your password.
- The camera reboot option will now show for a certain camera firmware that wasn't previously supported but should have been.
- Misc performance improvements and bug fixes.

- Resolved a bug that could result in the no-entry delay modifier being incorrectly shown.
- Resolved an issue that prevented the New User form from being scrollable at times.
- Fixed a bug that causes issues with FaceID permissions.
- Fixed a crash that could occur when using the Suggest button while changing your password.
- General stability improvements.

- Made modifications to camera enrollment flows to better support different models.
- Resolved an issue that prevented the password strength meter from working when adding a user.
- Updated some verbiage around certain camera motion detection area configurations.
- Added missing localizations.
- Resolved an issue where unenrolling a zone would temporarily remove all zones associated with that sensor regardless of zone input index.
- Resolved user device permissions UI issues.
- Resolved issues with the arm silent / arm audibly modifier.
- Resolved issues that caused various lists to be incorrectly sorted.
- Resolved camera related issues for certain models.

- Resolved some issues with the arm silent / arm audibly modifier.
- Resolved issues that caused various lists to be incorrectly sorted.
- Fixed an issue that prevented the app from ingesting some camera names at provisioning time.

- Fixed demo mode which was only showing cameras.
- "Demo" mode button is now disabled when there is text in the password field
- Network call improvements.

- Removed un-utilzied contact info fields.
- Peripheral display support added.
- Peripheral management support added (when allowed).
- Resolved an issue that could cause camera info to not be properly populated.
- Resolved an issue that resulted in notification tokens not being registered on the first launch correctly.
- Improved user management, especially "by system".
- The user will now be prompted to double check changes after attempting a WiFi network reconfiguration on a camera to verify desired settings.
- Post WiFi reconfiguration on a camera, the application will kick off an automatic configuration migration attempt to sync the camera with previously known settings.

- Resolved an issue where the OK button on the Wi-Fi Credentials modal during camera enrollment could become disabled w/out recourse.
- Added support for alula siren enrollment.
- Local Access Users now have their own section in the user management list.
- Resolved an issue where BAT-Connect could create a disarm action with the silent modifier, which isn't supported.
- Added user promotion support.
- Resolved an issue where newly created Sub-Users w/out access to any cameras or devices would see the camera tab.
- Resolved a french localization issue that caused a good chunk of the application from being translated appropriately in French. This also created some weird UI layout issues.
- Resolved an issue that resulted in failed branding logo retrievals.
- Resolved an issue that prevented certain zone configuration features from being set.
- Resolved an issue where you couldn't rename a system from the "Done" button above the keyboard in Settings.
- Resolved an issue where you couldn't toggle the camera microphone setting on certain cameras.
- Resolved an issue where the app could crash during camera enrollment when going down the manual enrollment flow.
- Resolved a crash.
- Added support for new cameras.

- Resolved an issue that could prevent certain cameras from provisioning over ethernet.

- Resolved an issue where the app would incorrectly show Privacy Mode for a camera.
- Minor verbiage changes.

- Resolved an issue where cameras could show offline even when they were online.

- Resolved an issue where deleting a user wouldn't update locally until the app was restarted.
- Resolved an issue for a certain camera that allowed it to attempt a wired provisioning flow when it wasn't supported by the firmware of the camera.
- Improved wired provisioning flow on certain camera models.
- Added some additional dialogs around saving camera screenshots and videos to the photo album if permissions prevented it.
- Fixed an issue where the "Add Camera" button or camera device messages in the cameras list could appear incorrectly in demo mode as well as between user sessions.
- Resolved some post-log-in issues that resulted in premature dialogs regarding devices or incorrectly configured tabs.
- Resolved some account management issues.
- Resolved an issue where users under the same primary account, with access to the same cameras, couldn't see clips after logging in without first backgrounding the application.
- Resolved camera related performance issue that can reduce CPU usage by roughly 40%.
- Demo mode now disables unsupported camera features, including the ability to add cameras.
- After logging out of demo mode, the theme is now reset to the default.
- Switching accounts should now clear the debug log.
- Demo mode camera missing firmware version and problem conditions have been resolved.
- Resolved an issue where first-time users would prematurely see a message regarding a lack of devices.
- Resolved an issue where the live view wasn't showing data rate info for certain cameras.
- Resolved a crash that could occur when saving camera snapshots.
- Disabled editing on debug view.
- Improved performance with certain cameras.
- Added additional logging for cameras.
- Misc fixes and improvements.

- Resolved an issue that prevented suppressed events from showing in the event log.

- Fixed a bug that caused issues with the navigation bar on rotation in the camera region editor.
- Camera card gear icon problem conditions updated.
- Added offline overlay changes to the camera card.
- Added some additional camera debugging output.
- Fixed an issue on certain cameras during WiFi config that resulted in premature provisioning attempts.
- Improved handling of poor camera connections.
- Resolved an issue where some camera previews would return with an incomplete image.
- The login screen will now disable the login button when appropriate.
- Improved logic around changing passwords. Biometric auth pre-password change now removes the need for redundant password entry.
- Misc bug fixes and improvements.

- Added messaging around authentication failures.
- Resolved some messaging notification issues.
- Misc bug fixes and improvements.
- Added supported camera checking and notices along with a link to the camera support url.
- Added a logout button and some user-type-specific text to the screen if you log in to an account without any devices.
- Moved the chat/messenger icon to the tab bar.
- Added support for tab bar sorting.
- Modified the navigation behavior of the "More" tab.
- Added a password suggestion button and password visibility toggles to the create user screen via the "Manage Access" flow.
- Added support for the Ecolink PIR.
- Resolved an issue where clicking on cameras on certain user management screens would navigate to a blank permissions screen.
- Resolved an issue that was causing navigation controllers to unnecessarily pop back to their root view controllers.
- Reworked panel picker UI.
- Added dashboard item sorting.
- Pull to refresh indicator added to cameras and scenes.
- Added a feature to show processing video events for cameras where it is supported.
- Improved some video event network calls, notification handling and event processing.
- Added visibility toggle to user pin codes.
- Added video event pull to refresh support.
- Misc bug fixes and improvements.

- Improved display performance/consistency/reliability for Cancel/Confirm.
- Fixed a bug where switching between dates on the camera cells wouldn't transition the slider thumbnail icon.
- The video cell slider should now default to showing the most recent clips first when looking at "Today".
- Fixed a bug where account holders couldn't delete other account/admin level users.
- Updated some camera provisioning screens.
- Removed the floating chat icon from non-primary screens.
- Added support for new tilt sensor.
- Added motion detection region support.

- Fixed a bug that caused the app to crash sometimes.
- Reworked some camera motion detection configuration menus.

- If camera provisioning fails due to what appears to be incorrect credentials, the stored password is cleared and the user must re-enter the password.
- Improved camera firmware update messaging to decrease confusion with new cameras.
- Added PTZ home + calibrate support for certain cameras.
- Restored previously broken notification live view action options for video notifications.
- Resolved an issue where validate on resume/disarm would show as enabled for new accounts.
- Resolved an animation issue with the QR code scanner.
- Improved BLE connection failure handling for provisioning of certain cameras.

- Improved the manual input flow for camera registration and added support for new cameras.
- Added an in-app notification settings link in the app's notification system settings.
- Improved new camera online/offline status handling.
- Improved Concord 4 support.
- User permissions are no longer allowed to be modifiable while a system is armed.
- The video event player should now allow you to go back to the last event at the end of the list instead of the previous to the last event.
- Resolved an issue where a user would be incorrectly informed that they don't have permission to perform an arming action in certain scenarios when they actually do.

- Added an SD-Card check message at the beginning of camera provisioning.
- Fixed a branding issue when switching between different accounts where one account has branding disabled.
- Fixed an issue where an account that doesn't have devices but is configured for cameras, doesn't see the camera controls without a forced restart.
- The app should now prevent your phone from "falling asleep" during camera provisioning.
- Updated branding code to use provided color as the primary.
- Improved camera list refresh behavior when a new camera is provisioned.
- Fixed a bug on certain forms that could cause the app to crash.
- Improved camera notification thumbnail handling.
- The camera firmware screen should no longer show the Update Firmware button once a firmware update is in progress (on supported cameras).
- Added support for new cameras.

- Fixed a bug that prevented BAT-Fire from seeing the event log.
- Fixed a bug that prevented certain legacy security panels from displaying in the app.
- Fixed a bug that resulted in an error message when provisioning a new camera model.
- Fixed a bug that caused a crash during device naming procedures.

- Fixed some crashing bugs.
- Added a firmware check following provisioning of cameras. Provided there is an available firmware update, the app will kick off the update and prompt the user.
- Added support for new camera models.

- Fixed some crashing bugs.

- Resolved an issue that prevented the UI from honoring inherited `Validate on Disarm` and `Validate on Resume` preferences for Account Manager accounts. The app will now correctly prevent toggling of those when the Account Holder has turned them on and set them to be inherited.
- Fixed a bug that could result in the incorrect password being used during password validation scenarios if the client has had multiple users log in since the last cold launch.
- Account-holders will now be prompted to validate their password when trying to toggle on validating on resume/disarm.
- Added dealer branding logo to the dealer info screen.
- Zone chime toggles should now be disabled if Global Chime is disabled or the user isn't an account manager.
- Improved dynamic dealer branding support.
- Added a theme color picker.
- Fixed a bug where the validate on disarm state wouldn't be honored during an alarm if toggled off.
- Added cancel/confirm support where the feature is enabled by a device.
- Fixed an issue that could prevent camera WiFi reconfiguration from working properly.
- Fixed a video landscape rotation issue as well as some other layout issues related to the device rotation.
- The EULA accept button is now enabled by default.

- Fixed a bug that incorrectly allowed sub-users access to the camera provisioning workflow, which would fail as a result of their user type.