5.8.7
2023-07-16
If you have iCloud Photos turned on and set to "Optimize storage" on your device, the resolution of your photos will be extremely low when the remaining storage capacity of your device is low. Therefore, when you open the album on the Camera screen, if you select 'YES' for the alert 'Do you want to use iCloud photos?', you can download and display the clear original photos from iCloud. However, it requires an Internet connection, so please use it in an environment with WiFi. It takes a little time to display the photo because the photo data is downloaded.
5.8.5
2022-03-11
Fixed the problem that some photos are not displayed when the album is displayed on the camera screen and the photos are selected and displayed in full screen.
1. 1. For photos that are not displayed, the resolution is reduced.
2. The photos that can be displayed have been changed to display at the original maximum resolution. It looks clearer than before.
5.8.4
2021-08-02
Help> Tracking function :has been partially modified. The following has been added as the note. "Turn on mobile data communication, and then turn on UpGo! and iCloud Drive under it."
5.8.3
2020-08-21
When using iCloud with the tracking function, the problem that data could not be written while using it many times was fixed.
5.8.2
2020-07-12
When deleting data from the data list on the Data screen, the problem that the application crashes when the last one is deleted has been fixed.
5.8.0
2020-06-22
1. In order to let more people use UpGo!, It can be saved up to 10 times in the free version.
2. Enabled to search/extract target files from many files on DATA screen.
5.7.0
2020-06-06
1. Changed the save time of photos from GPS update time (Japan time: up to minutes) to System time (local time: up to seconds). As a result, the exact shooting time will be recorded in UpGo!.
2. Even if the photos displayed in the UpGo! album are deleted from the device and saved again on the device, they cannot be displayed with the album button. This can happen even when changing the device model. Added a function to search and restore when a photo exists on the device, but the photo is not displayed by UpGo!. The "Search and Restore" button will be displayed when there are photos that are not displayed in the album.
5.6.5
2020-05-13
When the amount of cache data required for offline maps exceeds 300MB, an alert is displayed on the Data screen when UoGo! Starts. This encourages users to delete unnecessary cached data.
(Reference information) In iOS13.3, when reading the cache data of the map, there was a phenomenon that the map tile fell out and could not be displayed, but this bug was improved by upgrading to iOS13.4.
5.6.4
2020-04-29
Fixed a bug that the application crashes when an external Gpx file (a file that records the movement track on a map) is read and positioning is started and the tab is switched and the screen returns to the Map screen.
5.6.2
2020-04-08
CAMERA tab> Album Button> Tap a photo (when there is a photo)
There is a memo button below the full screen photo, but it was hidden in the photo in the previous version upgrade. This has been fixed.
5.6.0
2020-04-02
On iOS13, the app crashed when taking photos, so the app code was modified.
5.5.0
2020-01-07
The application may be terminated due to lack of memory or other reasons. The following preventive measures were implemented.
1. When the memory becomes insufficient, a warning sound (sound of hitting a bucket) is issued. In that case, please wait a few moments for operations such as switching screens and taking pictures.
2. Changed the camera so that continuous shooting is not possible, opened the shooting screen once and pressed the shutter.
3.The data processing method for acquiring location information has been devised.
5.4.4
2019-12-12
Fixed a bug that crashed when opening a GPX file imported from outside due to changing the time recording by seconds in Ver5.3.0.
5.4.0
2019-12-02
Added a view in the app for App Store ratings and reviews. At the same time, a CONTACT button has been installed in order to send inquiries and feedback to the Help screen.
5.3.0
2019-11-25
1. The right and left arrow keys are displayed during positioning so that the red pin can be selected and moved. It became easy to check the position information of the red pin by displaying the annotation. The time displayed in the annotation has been changed from hours and minutes to hours, minutes and seconds.
2. The map display range on the Map screen immediately after reading data or switching screen tabs has been changed from a fixed size display to an optimal size display method that can display the distribution range such as red pins on the entire screen. .
3. The name of the 'Read Data' button on the Data screen has been changed to 'Data List'. When the data list (saved file name) is displayed, this button is hidden. In addition, when the Data screen is opened immediately after starting the application, this data list is displayed.
5.2.2
2019-11-19
The red pin annotation display introduced in version 5.2.0 has been modified to be completely compatible with previous data. Specifically, It was solved that the application falled when reading the data created before 5.1.0 and opening the map on the Map screen.
5.2.1
2019-11-18
Modified to display the red pin annotation added in the previous version even during positioning.
5.2.0
2019-11-15
On the map, in addition to the start mark 'S' and goal mark 'G', the rest mark 'R' is dropped at the position where positioning was paused. Also, 'Pause' and 'Resume' are displayed in a red pin balloon.
5.1.0
2019-11-06
Positioning can now be paused when it is no longer necessary to update location information due to a break during positioning. This can save battery power.
Pressing the “STOP” button allows you to select “End”, “Continue”, or “Pause”. When paused, the “STOP” button will show “Resume”. Press the “Resume” button to continue positioning.
5.0.2
2019-10-23
When searching a map on the Map screen, a problem that the map did not move to that location occurred in some environments. This phenomenon has been corrected.
5.0.0
2019-10-22
Localization of the photograph button name in AR View and the completion button name after deleting data on the Data screen into Japanese was executed.
4.9
2019-10-02
1. When you take a picture, after you press the shutter button, you will automatically return to the camera screen and continue to take pictures.
2. In AR View, press the newly added “Photograph” button to save the image immediately.
4.8
2019-09-16
The push notification of the new version when starting the app has been translated into English.
4.7
2019-09-10
UpGo! App now supports English.
4.6
2019-08-24
前バージョンで地図の選択ができるようになりましたが,iCloudを利用した追跡機能のルート描画ができなくなるバグを修正しました.
4.5
2019-08-16
利用できる地図として,国土地理院地図のほか,Apple社の標準地図,航空写真,航空写真+標準地図 の4種類を選択できるようになりました.これにより,市街地の主要な施設名や建物,店舗などの名前がわかります.また,航空写真により付近の状況が鮮明になります.さらに,海外でもUpGo!を使用できるようになりました.
登山以外にも,トレッキングやハイキング,観光,サイクリングなど,幅広く活用していただけるアプリに成長しました.
*UpGo! を起動した画面(Map)の左上,青い文字「地図」をタップしてください.
4.4
2019-08-09
AppStoreにUpGo!の新バージョンが公開されたとき,UpGo!を起動すると,その通知を受け取り,すぐにアップデートできます.
4.3
2019-07-13
次の「追跡機能」に関するアラート(iCloudデータが読み込めないときの処理)とヘルプを追加,充実しました.
<登山中の移動データを,iCloudを利用して,ほぼリアルタイムに別のiPhone(iPad)のUpGo!地図上に表示します.
家族などが安否確認できます.(有料版で,同一のApple IDでサインインした端末が必要です)>
4.2
2019-07-08
登山中の移動データを,iCloudを利用して,ほぼリアルタイムに別のiPhone(iPad)のUpGo!地図上に表示します.
家族などが安否確認できる画期的なアプリです.(有料版で,同一のApple IDでサインインした端末が必要です)
4.1
2019-05-03
Camera画面のアルバム閲覧で,拡大した写真をスワイプによって上下左右に移動できるようになりました.