1.13.2
2024-03-04
Graphic and functional enhancements
1.12.0
2023-10-16
Added compatibility between connected IoT NFC/RFID landing reader and Vimar VIEW Portal.
Added possibility of configuring the relay change-over between NFC/RFID landing reader and IoT connected relay module/IoT connected actuator.
1.11.4
2023-07-25
Added the management of white backlighting of the connected 2-way switch in the Linea series for Button 1M vertical light beam.
Introduced the possibility of configuring the IoT UWB radar as crowding detector in a room (requires firmware updating and reconfiguration for devices already installed).
Improved the management of firmware updating (version 1.x without device reset or version 2.x with device reset).
Added Zigbee firmware for connected thermostat.
1.11.3
2023-07-11
Added the management of white backlighting of the connected 2-way switch in the Linea series for Button 1M vertical light beam.
Introduced the possibility of configuring the IoT UWB radar as crowding detector in a room (requires firmware updating and reconfiguration for devices already installed).
Improved the management of firmware updating (version 1.x without device reset or version 2.x with device reset).
Added Zigbee firmware for connected thermostat.
1.11.2
2023-06-06
Introduced the possibility of hiding a configured Bluetooth device from all users of the Vimar VIEW App.
Introduced the possibility of configuring the IoT UWB radar as a dusk/dawn 1-way switch to turn on the light or use it to detect absences in a room (requires firmware update for devices already installed and subsequent reprogramming).
Enhanced the management of groups: IoT UWB radar Sensors can be grouped together (requires firmware update for devices already installed and subsequent reprogramming).
Introduced the possibility of configuring the relays (xx593 and 03981) as auxiliary relay (requires firmware update for devices already installed and subsequent reprogramming).
Enhanced the management of groups: the relays (xx593 and 03981) configured as auxiliary relay can be associated with a UWB radar (requires firmware update for devices already installed and subsequent reprogramming).
1.11.1
2023-04-21
Introduced the possibility of hiding a configured Bluetooth device from all users of the Vimar VIEW App.
Introduced the possibility of configuring the IoT UWB radar as a dusk/dawn 1-way switch to turn on the light or use it to detect absences in a room (requires firmware update for devices already installed and subsequent reprogramming).
Enhanced the management of groups: IoT UWB radar Sensors can be grouped together (requires firmware update for devices already installed and subsequent reprogramming).
Introduced the possibility of configuring the relays (xx593 and 03981) as auxiliary relay (requires firmware update for devices already installed and subsequent reprogramming).
Enhanced the management of groups: the relays (xx593 and 03981) configured as auxiliary relay can be associated with a UWB radar (requires firmware update for devices already installed and subsequent reprogramming).
1.10.1
2023-02-28
Added management of groups of devices, combined with the new IoT connected commands: it is possible to use the IoT connected commands to control lights, shutters and generic loads (requires firmware update and subsequent reprogramming for the already installed devices)
Graphic and functional enhancements
1.10.0
2023-02-06
Added management of groups of devices, combined with the new IoT connected commands: it is possible to use the IoT connected commands to control lights, shutters and generic loads (requires firmware update and subsequent reprogramming for the already installed devices)
1.8.0
2022-07-04
Added the possibility of calling up scenarios of the VIEW Wireless wiring series from connected video entryphones, articles 40515 "Tab5S Up" and 40517 "Tab7S Up".
Inserted the new Integrations item, in the system management section.
1.6.3
2022-05-17
Increased the number of relays (xx593 and 03981) which can be configured within the load management logics (“Energy” category) to 8. Requires the gateway to be updated to version r337
1.6.2
2022-03-01
Increased the number of relays (xx593 and 03981) which can be configured within the load management logics (“Energy” category) to 8. Requires the gateway to be updated to version r337
1.6.0
2021-10-11
Added support to the IoT connected voice control device.
Added management of the screed temperature via the external probe for IoT connected thermostat.
Increased the time range for one-position stable operation (subject to firmware update of the devices that support it).
1.5.0
2021-07-14
Introduced the possibility for the installer and administrator to create the weekly programming of the IoT connected thermostat.
Added the possibility of configuring relays (xx593 and 03981) within the load management logics (“Energy” category).
Introduced PRODUCT REGISTRATION to benefit from certain beneficial services offered by Vimar.
Added the possibility of opening a system from a device with a different operating system from the one with which it was created.
1.2.2
2020-11-30
Introduced the possibility of creating a Smart system by integrating the VIEW Wireless connected wiring series, By-alarm burglar alarm system, Elvox video door entry system.To allow the user to control the Smart system using the VIEW APP for mobile devices, the delivery of the system via the VIEW Pro APP is also necessary.
Graphic and functional enhancements.
1.2.1
2020-10-05
Added support to the IoT connected single-phase Energy meter device
Added support to the IoT connected relay module device
Added support to the IoT connected roller shutter module device
Added the possibility of changing the time zone of the IoT system
Graphic and functional enhancements.
1.2.0
2020-09-16
Added support to the IoT connected single-phase Energy meter device
Added support to the IoT connected relay module device
Added support to the IoT connected roller shutter module device
Added the possibility of changing the time zone of the IoT system
Graphic and functional enhancements.
1.1.0
2020-05-06
Introduced the management of the behaviour of each individual button of the battery-free control.
Added ON/OFF control for camera flash in the QR Code scanning screen for battery-free controls.
Introduced the long press function to modify the device parameters.
Improved graphics.
1.0.1
2020-03-09
Improved graphics and functions