GeoAlarm Security
Free
7.4.0for iPhone, iPod touch
9.9
5 Ratings
SecureNet Technologies, LLC
Developer
117 MB
Size
Mar 11, 2024
Update Date
Lifestyle
Category
4+
Age Rating
Age Rating
GeoAlarm Security Screenshots
About GeoAlarm Security
Geo Alarm lets you control your lighting, climate, cameras, and security from a single application.
Stay connected from anywhere.
Receive real-time alarm status and arm or disarm your security system remotely. Get instant alerts in the event of a security alarm, or simply to be notified when your family arrives home.
Live video monitoring and event-recording.
Set cameras to automatically record security events in your home. Check in on your family and pets when you can’t be there. See who is at the door, or monitor your premises from multiple cameras at once.
One app.
Enjoy full interactive home control including lights, locks, cameras, thermostats, garage doors, and other connected devices.
Stay connected from anywhere.
Receive real-time alarm status and arm or disarm your security system remotely. Get instant alerts in the event of a security alarm, or simply to be notified when your family arrives home.
Live video monitoring and event-recording.
Set cameras to automatically record security events in your home. Check in on your family and pets when you can’t be there. See who is at the door, or monitor your premises from multiple cameras at once.
One app.
Enjoy full interactive home control including lights, locks, cameras, thermostats, garage doors, and other connected devices.
Show More
What's New in the Latest Version 7.4.0
Last updated on Mar 11, 2024
Old Versions
New Features:
Ability to select multiple videos to delete at once(This is waiting on a backend deployment-You can test the function but the videos will not be removed)
iOS - The reset password section under user management now has enhanced security. You are required to enter the old password and input the new password twice.
Improvements:
Video event filters UI improved so it is more obvious a filter is set.
Updated the Instabug feedback SDK for performance improvements.
Dealer activation enhancements.
UI enhancements for the notifications section.
Updated LED options for D3 cameras.
Updated selection toggles to be uniform across the app.
Added descriptions to the power management section in camera settings.
Updated the Z-Wave status for garage doors so it shows the correct status.
Events deleted on the panel should now correctly sync with apps deleted on the mobile app.
Fixes:
Fixed a bug that was causing arm/disarm to fail.
Alarm state UI is now functioning correctly.
Updated the D3 SDK to fix several crashes that were reported on the cameras page.
Fixed a bug that was causing the video events filter to incorrectly display the selected date range.
Email field for a guest user is now optional.
Switch account now correctly displays the account name instead of the username when switching back and forth.
Fixed a bug that showed fake placeholders during account switching.
Sensor bypass now respects what the panel is sending. This has removed the ability to bypass smoke/CO.
Fixed a bug that was causing sensors to not get bypassed when trying to bypass multiple ones quickly.
Door lock information is now displaying correctly.
Fixed a bug that was causing the cameras tab on the top of the events page to be unresponsive.
Fixed a bug that wasn’t allowing new user accounts to sign in with their updated password.
Ability to select multiple videos to delete at once(This is waiting on a backend deployment-You can test the function but the videos will not be removed)
iOS - The reset password section under user management now has enhanced security. You are required to enter the old password and input the new password twice.
Improvements:
Video event filters UI improved so it is more obvious a filter is set.
Updated the Instabug feedback SDK for performance improvements.
Dealer activation enhancements.
UI enhancements for the notifications section.
Updated LED options for D3 cameras.
Updated selection toggles to be uniform across the app.
Added descriptions to the power management section in camera settings.
Updated the Z-Wave status for garage doors so it shows the correct status.
Events deleted on the panel should now correctly sync with apps deleted on the mobile app.
Fixes:
Fixed a bug that was causing arm/disarm to fail.
Alarm state UI is now functioning correctly.
Updated the D3 SDK to fix several crashes that were reported on the cameras page.
Fixed a bug that was causing the video events filter to incorrectly display the selected date range.
Email field for a guest user is now optional.
Switch account now correctly displays the account name instead of the username when switching back and forth.
Fixed a bug that showed fake placeholders during account switching.
Sensor bypass now respects what the panel is sending. This has removed the ability to bypass smoke/CO.
Fixed a bug that was causing sensors to not get bypassed when trying to bypass multiple ones quickly.
Door lock information is now displaying correctly.
Fixed a bug that was causing the cameras tab on the top of the events page to be unresponsive.
Fixed a bug that wasn’t allowing new user accounts to sign in with their updated password.
Show More
Version History
7.4.0
Mar 11, 2024
New Features:
Ability to select multiple videos to delete at once(This is waiting on a backend deployment-You can test the function but the videos will not be removed)
iOS - The reset password section under user management now has enhanced security. You are required to enter the old password and input the new password twice.
Improvements:
Video event filters UI improved so it is more obvious a filter is set.
Updated the Instabug feedback SDK for performance improvements.
Dealer activation enhancements.
UI enhancements for the notifications section.
Updated LED options for D3 cameras.
Updated selection toggles to be uniform across the app.
Added descriptions to the power management section in camera settings.
Updated the Z-Wave status for garage doors so it shows the correct status.
Events deleted on the panel should now correctly sync with apps deleted on the mobile app.
Fixes:
Fixed a bug that was causing arm/disarm to fail.
Alarm state UI is now functioning correctly.
Updated the D3 SDK to fix several crashes that were reported on the cameras page.
Fixed a bug that was causing the video events filter to incorrectly display the selected date range.
Email field for a guest user is now optional.
Switch account now correctly displays the account name instead of the username when switching back and forth.
Fixed a bug that showed fake placeholders during account switching.
Sensor bypass now respects what the panel is sending. This has removed the ability to bypass smoke/CO.
Fixed a bug that was causing sensors to not get bypassed when trying to bypass multiple ones quickly.
Door lock information is now displaying correctly.
Fixed a bug that was causing the cameras tab on the top of the events page to be unresponsive.
Fixed a bug that wasn’t allowing new user accounts to sign in with their updated password.
Ability to select multiple videos to delete at once(This is waiting on a backend deployment-You can test the function but the videos will not be removed)
iOS - The reset password section under user management now has enhanced security. You are required to enter the old password and input the new password twice.
Improvements:
Video event filters UI improved so it is more obvious a filter is set.
Updated the Instabug feedback SDK for performance improvements.
Dealer activation enhancements.
UI enhancements for the notifications section.
Updated LED options for D3 cameras.
Updated selection toggles to be uniform across the app.
Added descriptions to the power management section in camera settings.
Updated the Z-Wave status for garage doors so it shows the correct status.
Events deleted on the panel should now correctly sync with apps deleted on the mobile app.
Fixes:
Fixed a bug that was causing arm/disarm to fail.
Alarm state UI is now functioning correctly.
Updated the D3 SDK to fix several crashes that were reported on the cameras page.
Fixed a bug that was causing the video events filter to incorrectly display the selected date range.
Email field for a guest user is now optional.
Switch account now correctly displays the account name instead of the username when switching back and forth.
Fixed a bug that showed fake placeholders during account switching.
Sensor bypass now respects what the panel is sending. This has removed the ability to bypass smoke/CO.
Fixed a bug that was causing sensors to not get bypassed when trying to bypass multiple ones quickly.
Door lock information is now displaying correctly.
Fixed a bug that was causing the cameras tab on the top of the events page to be unresponsive.
Fixed a bug that wasn’t allowing new user accounts to sign in with their updated password.
7.3.0
Jan 24, 2024
New Features:
Walkthrough for bypassing sensors.
Improvements:
Cameras now show offline from the live view page.
Dealer activation enhancements.
Improved connection and wakeup times for cameras.
Updated link quality descriptions for cameras/doorbells to be more user friendly.
Updated LED settings on cameras/doorbells.
Added a ‘Siren’ option for live view control.
Updated the UI for dark mode when viewing sensors.
Updated filter settings under video events.
Fixes:
Fixed a crash that happened when checking user details on a slave account.
Fixed a bug that did not allow a user to change user settings if there was no panel attached.
Fixed a bug that was causing the security status to not update properly on the Security page.
Fixed a bug that was causing the application to show the incorrect status when in alarm.
Fixed a bug that was causing keep me logged in for 2 weeks to not function correctly when biometrics was disabled.
Fixed a crash that happened when a currently logged in user tried to view its user details.
Fixed a crash that happened when assigning a Z-Wave device to a room.
Fixed a bug that caused the application to load placeholders without any data in them.
Fixed a crash that happened when switching accounts.
Fixed a bug that caused sensor status to not update when in alarm.
User’s are now informed of an open sensor when arming the system.
Walkthrough for bypassing sensors.
Improvements:
Cameras now show offline from the live view page.
Dealer activation enhancements.
Improved connection and wakeup times for cameras.
Updated link quality descriptions for cameras/doorbells to be more user friendly.
Updated LED settings on cameras/doorbells.
Added a ‘Siren’ option for live view control.
Updated the UI for dark mode when viewing sensors.
Updated filter settings under video events.
Fixes:
Fixed a crash that happened when checking user details on a slave account.
Fixed a bug that did not allow a user to change user settings if there was no panel attached.
Fixed a bug that was causing the security status to not update properly on the Security page.
Fixed a bug that was causing the application to show the incorrect status when in alarm.
Fixed a bug that was causing keep me logged in for 2 weeks to not function correctly when biometrics was disabled.
Fixed a crash that happened when a currently logged in user tried to view its user details.
Fixed a crash that happened when assigning a Z-Wave device to a room.
Fixed a bug that caused the application to load placeholders without any data in them.
Fixed a crash that happened when switching accounts.
Fixed a bug that caused sensor status to not update when in alarm.
User’s are now informed of an open sensor when arming the system.
1.0.6
Nov 1, 2023
Users can now change the order of how their cameras are displayed.
Updated the grammar to correctly display how many sensors are open.
Updated light and dark mode themes to improve readability of certain items.
Updated the naming convention for downloaded videos.
Fixed a bug that caused thermostats to show offline if multiple were added in a row.
Battery level now shows for Z-Wave devices
Fixed a bug so dimmers could be turned off from the app.
Fixed a bug that would cause camera/doorbell calls to end unexpectedly
Updated the UI for automations
Fixed a bug that caused the disarm button to disappear when the panel was in alarm state.
Fixed a bug that caused some video events to have some incorrect labels.
Fixed several crashes
Video plan fix
Updated the grammar to correctly display how many sensors are open.
Updated light and dark mode themes to improve readability of certain items.
Updated the naming convention for downloaded videos.
Fixed a bug that caused thermostats to show offline if multiple were added in a row.
Battery level now shows for Z-Wave devices
Fixed a bug so dimmers could be turned off from the app.
Fixed a bug that would cause camera/doorbell calls to end unexpectedly
Updated the UI for automations
Fixed a bug that caused the disarm button to disappear when the panel was in alarm state.
Fixed a bug that caused some video events to have some incorrect labels.
Fixed several crashes
Video plan fix
1.0.5
Oct 11, 2023
Updated the filter options to show the correct recording types.
Removed "Smartlink" from the user switching page.
Fixed a bug that caused the exit delay timer countdown to not show up on the mobile application.
Fixed a bug that caused the navigation bar to disappear after clicking a deep linking push notification.
Fixed the "update password" button on the first user login password change screen.
Fixed a bug that caused the "Security" icon to disappear from the navigation bar when opening the sensors bottom sheet.
Resolved several outstanding issues with switching accounts:
Fixed a bug that caused the menu to be nonresponsive
Fixed a bug that was stopping cameras and events from being viewed
Fixed a bug that was crashing the application when clearing filters
Removed all entry points to add a Z-Wave device
Fixed a bug that gave an "Invalid Token" error when trying to update a user's password.
Removed "Smartlink" from the user switching page.
Fixed a bug that caused the exit delay timer countdown to not show up on the mobile application.
Fixed a bug that caused the navigation bar to disappear after clicking a deep linking push notification.
Fixed the "update password" button on the first user login password change screen.
Fixed a bug that caused the "Security" icon to disappear from the navigation bar when opening the sensors bottom sheet.
Resolved several outstanding issues with switching accounts:
Fixed a bug that caused the menu to be nonresponsive
Fixed a bug that was stopping cameras and events from being viewed
Fixed a bug that was crashing the application when clearing filters
Removed all entry points to add a Z-Wave device
Fixed a bug that gave an "Invalid Token" error when trying to update a user's password.
1.0.3
Sep 8, 2023
New Features:
- Battery level for cameras/doorbells can be seen under camera information.
- Motion and doorbell press push notifications for doorbells/cameras can be disabled.
- You can now manage push notifications received for z-wave devices.
- Rich motion/doorbell push notifications that include a snapshot in the notification.
- Updated sign in options so the user has more freedom to decide how long they want to stay in.
Improvements:
- Automations are executing more consistently now.
- Camera live connections provide an error prompt if they are not able to provide a connection.
- Removed the word “other” from the notifications list on iOS.
- Removed the extra page in the camera settings section. The user jumps directly to camera settings now.
- Z-wave naming between the application and smartlink is now syncing properly.
- Updated the camera timeout message to be more user friendly.
Bugs Fixed:
- Fixed a bug that was causing the old UI to be seen when in alarm state.
- Fixed a bug that cut off the timestamp for doorbells and cameras when live viewing landscape mode.
- Fixed a bug that caused the events tab to stick even when changing to the camera view.
- Fixed a bug that caused the app to crash when adding/deleting z-wave devices.
- Fixed a bug that caused the app to crash when a user tried switching accounts.
- Fixed a bug that caused the XDC01 to throw out an error when connecting to the camera settings.
- Fixed a bug that caused the app to crash after adding a thermostat.
- Fixed a bug that caused the app to crash when arming the panel with an open sensor.
- Fixed a bug where the + button was not working when adding a z-wave device for a custom room.
- Fixed a bug that caused the app to get stuck on Face ID login.
- Fixed a bug that popped up an error message on the D3 camera settings pages.
- Fixed a bug that caused the video type to just show as ‘recording’ in the events section.
- Fixed a bug that caused the sensor bypass screen to not come up when arming with an open sensor.
- Fixed a bug that caused the arming status to not update when remotely arming/disarming from the application.
- Battery level for cameras/doorbells can be seen under camera information.
- Motion and doorbell press push notifications for doorbells/cameras can be disabled.
- You can now manage push notifications received for z-wave devices.
- Rich motion/doorbell push notifications that include a snapshot in the notification.
- Updated sign in options so the user has more freedom to decide how long they want to stay in.
Improvements:
- Automations are executing more consistently now.
- Camera live connections provide an error prompt if they are not able to provide a connection.
- Removed the word “other” from the notifications list on iOS.
- Removed the extra page in the camera settings section. The user jumps directly to camera settings now.
- Z-wave naming between the application and smartlink is now syncing properly.
- Updated the camera timeout message to be more user friendly.
Bugs Fixed:
- Fixed a bug that was causing the old UI to be seen when in alarm state.
- Fixed a bug that cut off the timestamp for doorbells and cameras when live viewing landscape mode.
- Fixed a bug that caused the events tab to stick even when changing to the camera view.
- Fixed a bug that caused the app to crash when adding/deleting z-wave devices.
- Fixed a bug that caused the app to crash when a user tried switching accounts.
- Fixed a bug that caused the XDC01 to throw out an error when connecting to the camera settings.
- Fixed a bug that caused the app to crash after adding a thermostat.
- Fixed a bug that caused the app to crash when arming the panel with an open sensor.
- Fixed a bug where the + button was not working when adding a z-wave device for a custom room.
- Fixed a bug that caused the app to get stuck on Face ID login.
- Fixed a bug that popped up an error message on the D3 camera settings pages.
- Fixed a bug that caused the video type to just show as ‘recording’ in the events section.
- Fixed a bug that caused the sensor bypass screen to not come up when arming with an open sensor.
- Fixed a bug that caused the arming status to not update when remotely arming/disarming from the application.
1.0.2
Jul 24, 2023
Improvements:
Improved the live viewing experience for battery doorbell and battery camera.
Greyed out automations actions that are not available.
Bugfixes:
Fixed a bug that caused filters to not work on the events page.
Fixed a bug that caused the live video page to open continuously.
Fixed a bug that caused the video events to not load when switching from video to events.
Fixed a video caching bug that caused the application to crash.
Fixed several Spanish translation issues.
Removed routines filter from activity.
Fixed truncation issues in the activity section.
Improved the live viewing experience for battery doorbell and battery camera.
Greyed out automations actions that are not available.
Bugfixes:
Fixed a bug that caused filters to not work on the events page.
Fixed a bug that caused the live video page to open continuously.
Fixed a bug that caused the video events to not load when switching from video to events.
Fixed a video caching bug that caused the application to crash.
Fixed several Spanish translation issues.
Removed routines filter from activity.
Fixed truncation issues in the activity section.
1.0.1
Jun 7, 2023
Video enhancements and crash fixes
1.0
May 15, 2023
GeoAlarm Security FAQ
Click here to learn how to download GeoAlarm Security in restricted country or region.
Check the following list to see the minimum requirements of GeoAlarm Security.
iPhone
Requires iOS 15.0 or later.
iPod touch
Requires iOS 15.0 or later.
GeoAlarm Security supports English, French, Spanish
