i3 KNX

- Samsung TV module operation improved: the list of supported TVs has been expanded
- Support for iOS 17 added
- System settings update

- The smartphone version of the application has received an enhanced design: now the widgets are rounded and look neat, similar to the tablet version!

- The "Virtual Thermostat" widget, capable of replacing a KNX thermostat with 1 regular KNX relay and a temperature sensor, can now be voice-controlled through Alice, Amazon, Google Home.

- The "Dimmer" widget can now control the color temperature of the lighting. Voice control of the color temperature is also available now!

- Alice's functionality has been improved: we have obtained official skill certification and added handling for all necessary interaction scenarios with Alice.

- Added support for Fermax intercoms: a special widget with door opening and camera.

- The "Climate" widget now allows specifying the type of controlled load: air conditioner or underfloor heating, so that the voice assistant always understands which group of devices to control. And to make it easier to understand, we have updated the documentation for Alice.

- The icons on the "Blinds" widget automatically change when the type of curtains is changed (see the setting). Different icons will be displayed for blinds and curtains with different assembly types.

- The error when importing group addresses with type 20.102 HVAC Mode from ETS has been fixed. Now, after importing, the air conditioner modes will have the correct KNX type and subtype.

- Visual imperfections and some settings dialogues in the application have been fixed and improved.

- Added support for HS Server

- Added Air Conditioner widget
- Added the function of moving devices in the list
- Added the capability to import and export KNX devices
- Climate. Added On/Off status display
- Thermostat. Added the "Heater type" setting
- Curtains. Alice. Added open/close and 0-100% control at the same time
- Fixed "Moving" status display for curtains
- Fixed device management via Google Home
- Fixed bugs in the operation of the Virtual thermostat and timers

- The synchronization error with the Yandex.Alice skill is fixed

Support of iOS 16 is added

- Voice assistants: a capability to turn on Marco and Mode is added
- KNX widgets: a capability to copy and paste settings of typical widgets is added 
- KNX TP: a capability to change the physical address of KNX Home Server in KNX bus from the Interfaces tab in ETS is added
- KNX scenes: work with "Scene Control /18.001" type of data is corrected

- KNX widget of time and date: a capability to send time and date to the bus when the server starts is added 
- KNX widget - Blinds: an error in controlling blinds via Yandex Alice when there is no control of position is corrected 

- IP cameras: "downloading video" icon is displayed during connection to the camera 

- Languages: support of Unicode symbols is added (Vietnamese and other languages)
- Languages: sift in translation of weekdays in Timers is corrected
- Minor errors are corrected

- SIP-intercom: A widget for Akuvox intercom and a capability to open an image from any intercom fullscreen are added
- KNX widget for blinds: "Stop" button is added; settings to display the position are widened — a capability to invert the position is added
- KNX widgets for Climate and virtual thermostat: a capability to rename modes is added
- KNX widget for Climate: setting of values in the following parameters is added "On/Off", "Cooling status", "Heating status"
- KNX widget - a block of buttons: when "1 bit" type is chosen, the value of the button automatically changes into 1
- iPhone 12 and 13: interface items overlapping the status panel is corrected
- Saving widget location when going from room to room is corrected
- Localization into Dutch is updated.

- An errors in the Bluesound device is corrected

- Bluesound audio multiroom support added

- KNX "Fan" widget added
- Moved and renamed the "Run project" button in the Configurator
- Added the ability to run Macro from the Routines
- The list of rooms now returns to its previous position when leaving the Room
- Added the ability to broadcast a video stream from IP cameras over TCP
- Timers are now sorted in order of firing time

- Fixed a bug in the interface for configuring the static IP address of the server
- Bugs fixed

- Bluesound audio multiroom support added
- KNX "Fan" widget added
- Moved and renamed the "Run project" button in the Configurator
- Added the ability to run Macro from the Routines
- The list of rooms now returns to its previous position when leaving the Room
- Added the ability to broadcast a video stream from IP cameras over TCP
- Timers are now sorted in order of firing time

- Fixed a bug in the interface for configuring the static IP address of the server

New KNX widget, "TV remote" is added.
Czech, Slovak and Polish localization is added. Chinese, French and Dutch localization is updated.
When resetting to factory settings, to re-activate a server in the project it is not required to enter a license key.
Support of the following KNX types is added: 229.001 (measured value), 251.600 (RGBW color), 232.600 (RGB color).
Fixed error of the app and server work in networks with IPv6 support.
Fixed error of incorrect displaying of modes list in KNX widget "Climate".

- Guest mode is added – access to certain rooms can be limited, remote control and setting timers can be allowed or banned
- Support of Fanvil intercom is added
- Faster download of projects – optimization of images during uploading to a project is added
- When the password of an account is changed, current sessions of control panels can be stopped.
- Import of ETS projects with a password is added

- A system of backups is added: a capability to cancel changed on the server and in the i3 KNX app
- An error in the app work on DIVUS panels is: a navigation panel is always displayed
- KNX module, Climate: a capability to set “Thermostat modes” block of buttons is added
- KNX module, Climate: a capability to set a step of changing the required temperature (changing by 0.5 or 1 degree) is added in the widget and in routines.
- KNX module, Dimmer: a capability to set a step of absolute dimming is added
- KNX module, Dimmer: touch area of slider of a circular dimmer is increased (for more convenient control of brightness with the help of a circular dimmer)
- KNX module, Shutters: an error in the work of "Open" and "Close" routines (the routine did not work if a long press was not set)
- KNX module, Input number, Digital display: the heading area is increased (the heading of a widget can contain more symbols)
- SIP module: the "open/close door", "turn on/off light" events are added to intercoms
- The "Make public" button is now called "Save on server " and it is located in the top part of the app
- When the password of an account is changed, it is possible to reset authorization and remote access of devices authorized with this account.
- Control of edge lighting of iRidium panel P7-PoE from macros, modes and routines is added.
- Server update to the latest version when activated from the config is added (after resetting).
- Screensaver mode is added for built-in panels (iRidium panel 7, etc.). It is available only for templates.
- An error is corrected: the name of Wi-Fi network could not be identified on some devices when a project was created
- Errors are corrected, translation is improved and added

- Demo-mode for end-users is realized
- Fast access to setting timers is added
- Events of call start and call end of SIP server to use in routines are added.
- Sending IP address via a cloud for reliable location in the network is realized.
- Sonos driver is updated
- Minor corrections and developments

- Support of several SIP subscribers
- An error of adding a device with a full stop in its name is corrected

- The climate widget for KNX can work with 1 bit shift
- It's easier to move floors in the mobile version
- Dutch and French localization is updated
- An error is corrected: devices located only on the main page can be used in macros and routines
- An error is corrected: timers can be activated by events of an astronimical timer (sunrise, noon, ...)
- Minor corrections and developments.

- Google Home voice assistant is added
- Capability to add any widget to the main page is added, more layout capabilities are added
- Sonos: Favorites playlists can be added to the list to play
- A new module, "Web page" is added (following a link in the app)
- Other improvement and corrections

- Yandex Alice voice assistant
- Control of Sonos
- Saving group addresses from ETS project between sessions
- Display of group addressed from ETS project on mobile devices
- Import of building structure (floors and rooms) from ETS project
- French localization is added, Chinese localization is updated
- New parameter to control dimmer: dimming speed
- Widgets of a dimmer and a media remote are improved
- A device to send time and date to addresses of KNX bus is added

- Amazon Alexa voice assistant is added.
Update i3 KNX on all devices!

- KNX widgets are improved
- Errors are corrected

- full-size remote for Samsung TV is corrected (problems with display)
- volume buttons on KNX media remote are corrected
- TP1 interface is selected as a way to connect to KNX by default in a new project