ITC Cloud Manager
Free
2.7.1for iPhone, iPad and more
INNOVACIO TECNOLOGICA CATALANA SL
Developer
41 MB
Size
May 6, 2024
Update Date
Productivity
Category
4+
Age Rating
Age Rating
ITC Cloud Manager Screenshots
About ITC Cloud Manager
Mobile application to manage easily the Water Controller 3000 irrigation controller.
Intuitive application to set up the 50 irrigation programs as well as the 48 fertigation recipes in the Water Controller, and to monitor at real time the parameters used as key indicators of the crop.
All the actions can be done through the mobile or tablet via a direct WI-FI link with the unit in the field, or remotely through internet access. The app holds all the data which is easily displayed in graphics, spread sheet or pdf monthly reports (e.g.). All this information is stored in the ITC Cloud-Manager Server which is in continuous communication with the units in the field through a high secure encrypted m2m communication.
Key points
- Extremely easy-to-use system which covert the tough job of setting up the irrigation programs into an easy an intuitive few steps job.
- Plug&play m2m system. Just guiving power to the unit in the field the unit link automatically to the Cloud-Manager and the unit is available in your mobile.
- Geolocate the unit and display valves , pumps, filters and blocks on a satelite view or map, highlithing the activated devices on real time.
- Graphic display of the evolution of fertigation parameters such as EC and pH as well as water flow and pressure. Fertilizer instantaneous flow can be displayed in the same graph as EC, pH and water flow to check and correct, of necessary, pH and EC automatic PI control.
- SMS and email alarm service for any of the parameters controlled ( water flow, pressure, EC, pH...)
- Thanks to geolocation the assistant inform about the weather forecast for the next 5 days, which can be direct linked to increase or reduce the irrigation run time through the Watering Factor
Intuitive application to set up the 50 irrigation programs as well as the 48 fertigation recipes in the Water Controller, and to monitor at real time the parameters used as key indicators of the crop.
All the actions can be done through the mobile or tablet via a direct WI-FI link with the unit in the field, or remotely through internet access. The app holds all the data which is easily displayed in graphics, spread sheet or pdf monthly reports (e.g.). All this information is stored in the ITC Cloud-Manager Server which is in continuous communication with the units in the field through a high secure encrypted m2m communication.
Key points
- Extremely easy-to-use system which covert the tough job of setting up the irrigation programs into an easy an intuitive few steps job.
- Plug&play m2m system. Just guiving power to the unit in the field the unit link automatically to the Cloud-Manager and the unit is available in your mobile.
- Geolocate the unit and display valves , pumps, filters and blocks on a satelite view or map, highlithing the activated devices on real time.
- Graphic display of the evolution of fertigation parameters such as EC and pH as well as water flow and pressure. Fertilizer instantaneous flow can be displayed in the same graph as EC, pH and water flow to check and correct, of necessary, pH and EC automatic PI control.
- SMS and email alarm service for any of the parameters controlled ( water flow, pressure, EC, pH...)
- Thanks to geolocation the assistant inform about the weather forecast for the next 5 days, which can be direct linked to increase or reduce the irrigation run time through the Watering Factor
Show More
What's New in the Latest Version 2.7.1
Last updated on May 6, 2024
Old Versions
- Allows saving configurations and retrieving them later.
- Improvement of automatic Gate connectivity (DHCP).
- Improvement of notification options. Now the application can receive them directly, without the need for SMS.
- Allows an equipment's alarm to be received by more than one user.
- Speed in loading and recording irrigation programs.
- Correction of operational and display errors.
- Improvement of automatic Gate connectivity (DHCP).
- Improvement of notification options. Now the application can receive them directly, without the need for SMS.
- Allows an equipment's alarm to be received by more than one user.
- Speed in loading and recording irrigation programs.
- Correction of operational and display errors.
Show More
Version History
2.7.1
May 6, 2024
- Allows saving configurations and retrieving them later.
- Improvement of automatic Gate connectivity (DHCP).
- Improvement of notification options. Now the application can receive them directly, without the need for SMS.
- Allows an equipment's alarm to be received by more than one user.
- Speed in loading and recording irrigation programs.
- Correction of operational and display errors.
- Improvement of automatic Gate connectivity (DHCP).
- Improvement of notification options. Now the application can receive them directly, without the need for SMS.
- Allows an equipment's alarm to be received by more than one user.
- Speed in loading and recording irrigation programs.
- Correction of operational and display errors.
2.7
May 3, 2024
- Allows saving configurations and retrieving them later.
- Improvement of automatic Gate connectivity (DHCP).
- Improvement of notification options. Now the application can receive them directly, without the need for SMS.
- Allows an equipment's alarm to be received by more than one user.
- Speed in loading and recording irrigation programs.
- Correction of operational and display errors.
- Improvement of automatic Gate connectivity (DHCP).
- Improvement of notification options. Now the application can receive them directly, without the need for SMS.
- Allows an equipment's alarm to be received by more than one user.
- Speed in loading and recording irrigation programs.
- Correction of operational and display errors.
2.6
May 22, 2023
- Improved stability and usability on multiple screens.
- Compatibility with new GATE v5.4 software versions.
- New connectivity menu that improves internet connection via ethernet.
- Improved data upload speed.
- Compatibility with new firmware version of WC3000 v08P08.
- Expansion of interrupted programs memory.
- Expansion from 2 to 6 express programs through the inputs of the irrigation modules.
- Improved flow resolution at low flow rates.
- Improvements on the status of an irrigation program.
- Remote monitoring of sensors and inputs.
- Configuration of outputs that are not affected by alarms.
- Compatibility with new GATE v5.4 software versions.
- New connectivity menu that improves internet connection via ethernet.
- Improved data upload speed.
- Compatibility with new firmware version of WC3000 v08P08.
- Expansion of interrupted programs memory.
- Expansion from 2 to 6 express programs through the inputs of the irrigation modules.
- Improved flow resolution at low flow rates.
- Improvements on the status of an irrigation program.
- Remote monitoring of sensors and inputs.
- Configuration of outputs that are not affected by alarms.
2.5
Oct 19, 2022
Display improvements on mobile and tablet.
Event log on the analytics page.
Improvement of disconnection messages
Export to pdf the list of outputs and watering and fertigation programs.
Visualization of outputs name in several pages.
Watering Program name appears in the program list.
Event log on the analytics page.
Improvement of disconnection messages
Export to pdf the list of outputs and watering and fertigation programs.
Visualization of outputs name in several pages.
Watering Program name appears in the program list.
2.4.3
Jan 27, 2022
Fixes and improvements.
2.4.0
Nov 20, 2021
User permissions update
2.3.0
Feb 25, 2021
Universal device connection in local networks and minor fixes.
2.2.4
Sep 29, 2020
Minor fixes:
- Pressure alarm icon and button in main screen.
- Save frequency param in Setup.
- Default state of the Summary button in Analytics.
- Save labels in Pumps & Filters.
- Pressure alarm icon and button in main screen.
- Save frequency param in Setup.
- Default state of the Summary button in Analytics.
- Save labels in Pumps & Filters.
2.1.4
Jul 29, 2020
- Minor fixes in the screens of Fertigation Programs and Analytics.
2.1.3
Jul 27, 2020
- Improvements in the table of data summary for mobile screens.
2.1.2
Jul 27, 2020
Bug fixes:
- Manual activation of Programs.
- High Frequency Record.
- Manual activation of Programs.
- High Frequency Record.
2.1
Jul 17, 2020
Bug Fixes:
- Show data of Watering Programs.
- Show data of Fertigation Programs.
- Local storage of program data for quick access to the details of each program.
- Show data of Watering Programs.
- Show data of Fertigation Programs.
- Local storage of program data for quick access to the details of each program.
2.0
Jul 15, 2020
Second generation of the app:
- Improvements in graphic design.
- New configurable parameters in the settings section.
- Data export.
- Report generation.
- New view with data summary.
- Improvements in graphic design.
- New configurable parameters in the settings section.
- Data export.
- Report generation.
- New view with data summary.
1.2
Sep 21, 2016
- Navigation issues fixed in Configuration Menus.
- Correctly display of realtime values fixed for iphone 6.
- New App Icon IOS friendly.
- Correctly display of realtime values fixed for iphone 6.
- New App Icon IOS friendly.
1.1
Sep 14, 2016
ITC Cloud Manager FAQ
Click here to learn how to download ITC Cloud Manager in restricted country or region.
Check the following list to see the minimum requirements of ITC Cloud Manager.
iPhone
Requires iOS 14.5 or later.
iPad
Requires iPadOS 14.5 or later.
iPod touch
Requires iOS 14.5 or later.
ITC Cloud Manager supports English, French, Spanish
