MSB 3
Free
3.11.1for iPhone, iPad and more
Age Rating
MSB 3 Screenshots
About MSB 3
Note:
Please confirm with your IT department, if this is the correct app for your company!
Using the Mobisys MSB 3 App, you can connect SAP applications on an iPhone and iPad, which were created with the Mobisys Solution Builder (MSB) on your SAP system.
The mobile applications have been realized in the SAP system using a graphical screen designer tool (Mobisys Screen Designer) and by means of ABAP programming.
MSB 3 has been optimized to run with MSB Runtime 600 und MSD 5.
It offers Theming, Icon Libraries, modern Fonts, PDF Component, LTA Event and much more.
During configuration of the MSB App, the wizard will guide you through the required parameters for the connection to your SAP system.
You log on to the SAP system with your user master data, which must be activated for mobile applications. You will also have to specify the SAP application you would like to use.
After this, you can use the application-specific menu to call the sub-menus and process individual transactions. The transactions are not limited to the display of data from the SAP system. Instead, the postings and changes made can be carried out individually for each application and according to the authorizations defined in the SAP system.
Besides the display and input elements, the following functions are also supported:
• Scanning of bar codes with the camera
• Output of sounds for errors, warnings or information messages
• Camera function and transfer of photos to the SAP system
• GPS function and transfer of geo-coordinates to the SAP system
If the Mobisys MSB App session is briefly discontinued to call another App or function of the iPhone or iPad, then the MSB App can nevertheless be continued without any problems within the duration specified in the SAP Internet Communication Framework. This means that the session remains active; the same applies if the connection is lost in the interim and needs to be re-established.
Prerequisites:
• The SAP Add-on “Mobisys Solution Builder” (MSB) (6.0 or higher recommended) is installed, configured, and licensed in your SAP system.
• The SAP system is accessible via a wireless LAN or a GSM/UMTS communications connection with TLS 1.2 enabled (for example, via the SAP Web Dispatcher).
• There is at least one mobile MSB application in the SAP system.
• The connection of the iPhone or iPad is licensed and activated in MSB Device Management using the defined device ID.
• The user logging on is activated in the SAP system.
Please confirm with your IT department, if this is the correct app for your company!
Using the Mobisys MSB 3 App, you can connect SAP applications on an iPhone and iPad, which were created with the Mobisys Solution Builder (MSB) on your SAP system.
The mobile applications have been realized in the SAP system using a graphical screen designer tool (Mobisys Screen Designer) and by means of ABAP programming.
MSB 3 has been optimized to run with MSB Runtime 600 und MSD 5.
It offers Theming, Icon Libraries, modern Fonts, PDF Component, LTA Event and much more.
During configuration of the MSB App, the wizard will guide you through the required parameters for the connection to your SAP system.
You log on to the SAP system with your user master data, which must be activated for mobile applications. You will also have to specify the SAP application you would like to use.
After this, you can use the application-specific menu to call the sub-menus and process individual transactions. The transactions are not limited to the display of data from the SAP system. Instead, the postings and changes made can be carried out individually for each application and according to the authorizations defined in the SAP system.
Besides the display and input elements, the following functions are also supported:
• Scanning of bar codes with the camera
• Output of sounds for errors, warnings or information messages
• Camera function and transfer of photos to the SAP system
• GPS function and transfer of geo-coordinates to the SAP system
If the Mobisys MSB App session is briefly discontinued to call another App or function of the iPhone or iPad, then the MSB App can nevertheless be continued without any problems within the duration specified in the SAP Internet Communication Framework. This means that the session remains active; the same applies if the connection is lost in the interim and needs to be re-established.
Prerequisites:
• The SAP Add-on “Mobisys Solution Builder” (MSB) (6.0 or higher recommended) is installed, configured, and licensed in your SAP system.
• The SAP system is accessible via a wireless LAN or a GSM/UMTS communications connection with TLS 1.2 enabled (for example, via the SAP Web Dispatcher).
• There is at least one mobile MSB application in the SAP system.
• The connection of the iPhone or iPad is licensed and activated in MSB Device Management using the defined device ID.
• The user logging on is activated in the SAP system.
Show More
What's New in the Latest Version 3.11.1
Last updated on Mar 21, 2024
Old Versions
Bugfix:
- Fix for login issue with ITS
- Fix for login issue with ITS
Show More
Version History
3.11.1
Mar 21, 2024
Bugfix:
- Fix for login issue with ITS
- Fix for login issue with ITS
3.11.0
Mar 19, 2024
New:
- Files (images, audio, PDFs) via custom repository in the SAP system
- License check in online / offline mode improved
- MSB App Start via start parameters with pre-selected size and / or profile
- Renaming of SecureSession to Security Session
- Information about the MSB App extended (contact address data and IT
secured, list of loaded certificates)
- Improvement of error message handling
- Various other minor improvements and adjustments in the area of function
and user-friendliness.
Bugfix:
- Scaling problems with LBL_Message
- Incorrect client version in MSB Device Manager
- Barcode scanner in landscape mode from iOS 16 did not work
- Files (images, audio, PDFs) via custom repository in the SAP system
- License check in online / offline mode improved
- MSB App Start via start parameters with pre-selected size and / or profile
- Renaming of SecureSession to Security Session
- Information about the MSB App extended (contact address data and IT
secured, list of loaded certificates)
- Improvement of error message handling
- Various other minor improvements and adjustments in the area of function
and user-friendliness.
Bugfix:
- Scaling problems with LBL_Message
- Incorrect client version in MSB Device Manager
- Barcode scanner in landscape mode from iOS 16 did not work
3.10.1
Nov 2, 2023
Bugfix
- Various other minor improvements and adjustments in the area of function and user-friendliness.
- Various other minor improvements and adjustments in the area of function and user-friendliness.
3.10.0
Aug 31, 2023
New:
▪ Tag wrap at BTN
▪ Various other minor improvements and adjustments in the area of function and user-friendliness
▪ Tag wrap at BTN
▪ Various other minor improvements and adjustments in the area of function and user-friendliness
3.9.0
Jun 29, 2023
New Features:
- Files via MSB Custom Repository
- Soundfiles
- Logo on login screen
- Login via OAuth with SAP BTP
- Tag wrap for LBL, MEM, RDT, CHX
- Log file size up to 4 MB
Bugfix:
- Offline: display of synchronized images
- Files via MSB Custom Repository
- Soundfiles
- Logo on login screen
- Login via OAuth with SAP BTP
- Tag wrap for LBL, MEM, RDT, CHX
- Log file size up to 4 MB
Bugfix:
- Offline: display of synchronized images
3.8.3
Apr 14, 2023
- Logging possibility as well as upload logfileto SAP
- Various minor improvements and adjustments in the area of function as well as user-friendliness.
- Various minor improvements and adjustments in the area of function as well as user-friendliness.
3.8.2
Feb 17, 2023
New:
- Various minor improvements and adjustments in the area of function and user-friendliness.
- Various minor improvements and adjustments in the area of function and user-friendliness.
3.8.1
Jan 19, 2023
Bugfix
• App might have not started with older WebView versions
• Various other minor improvements and adjustments in the area of function and user-friendliness.
• App might have not started with older WebView versions
• Various other minor improvements and adjustments in the area of function and user-friendliness.
3.8.0
Dec 21, 2022
New Features:
- Password change dialog for expired passwords
- Save client or user certificate at WebForm login
- Limit barcode types
- Query parameters for connection settings
Bugfixes:
- Fix generic http error
- Customizations for Zebra WS50
- No dark mode in settings and login screens
- Various other minor improvements and adjustments in the area of function as well as user-friendliness.
- Password change dialog for expired passwords
- Save client or user certificate at WebForm login
- Limit barcode types
- Query parameters for connection settings
Bugfixes:
- Fix generic http error
- Customizations for Zebra WS50
- No dark mode in settings and login screens
- Various other minor improvements and adjustments in the area of function as well as user-friendliness.
3.7.0
Oct 16, 2022
New Features:
- Capture NFC data
- User change for anonymous users
- Various other minor improvements and adjustments in the area of function and security as well as user-friendliness.
Bugfix:
- Correct display of MLV values
- Deletion of multiple profiles at the same time
- Import of profiles to incompatible release version
- Capture NFC data
- User change for anonymous users
- Various other minor improvements and adjustments in the area of function and security as well as user-friendliness.
Bugfix:
- Correct display of MLV values
- Deletion of multiple profiles at the same time
- Import of profiles to incompatible release version
3.6.2
Aug 18, 2022
Features:
- Use of self-signed certificates is now supported for SSL connections
Bugfix
- No icons shown on labels
- Various other minor improvements and adjustments in the area of function and security as well as user-friendliness.
- Use of self-signed certificates is now supported for SSL connections
Bugfix
- No icons shown on labels
- Various other minor improvements and adjustments in the area of function and security as well as user-friendliness.
3.6.1
Aug 4, 2022
- No timeout message on WebForm login after 30 minutes of inactivity
- No jump back to login screen after timeout
- No jump back to login screen after timeout
3.6.0
May 2, 2022
New features / improvements:
- It is possible to lock applications during inactivity(does not apply to authentication via ClientCert and Webform)
- Barcode scanner plugin supports additional linear and 2D barcode formats when scanning from the camera
- Upper row at MLV is fixed
- Various other minor improvements and adjustments in the area of function and security as well as user-friendliness
Bugfix:
- Username and password were not remembered
- Scanner integration with Honeywell devices
- It is possible to lock applications during inactivity(does not apply to authentication via ClientCert and Webform)
- Barcode scanner plugin supports additional linear and 2D barcode formats when scanning from the camera
- Upper row at MLV is fixed
- Various other minor improvements and adjustments in the area of function and security as well as user-friendliness
Bugfix:
- Username and password were not remembered
- Scanner integration with Honeywell devices
3.5.2
Feb 24, 2022
Features:
- Edit imported profiles
- Read and display barcode formats
- Redlining functionality in CAM component
- Overlay when entering short codes in menu masks
- Data input per scan only (optional)
Bugfix:
- No acoustic signal on invalid scan
Other feature-, performance- and security improvements
- Edit imported profiles
- Read and display barcode formats
- Redlining functionality in CAM component
- Overlay when entering short codes in menu masks
- Data input per scan only (optional)
Bugfix:
- No acoustic signal on invalid scan
Other feature-, performance- and security improvements
3.4.6
Oct 30, 2021
Bug Fixes
- Error message when allow_local_profiles via MDM profile management set to false
- Remember login user / Remember login password did not work for imported or via MDM rolled out profiles
Various feature, performance and security improvements
- Error message when allow_local_profiles via MDM profile management set to false
- Remember login user / Remember login password did not work for imported or via MDM rolled out profiles
Various feature, performance and security improvements
3.4.4
Sep 27, 2021
Bugfixes
• No login with capital ß
• No preselected profiles when starting MSB App
• Event via hotkey or shortcode despite readonly setting
• Problem with data type UNIT
Various security, performance und feature improvements
• No login with capital ß
• No preselected profiles when starting MSB App
• Event via hotkey or shortcode despite readonly setting
• Problem with data type UNIT
Various security, performance und feature improvements
3.4.3
Jun 17, 2021
Improvement / New feature
- Profile Export/Import
- Scale images
- Shortcode handling adjusted
- Set image resolution for CAM
- Localization format for date and time values (EDT)
Bug
- Text and icon alignment incorrect
- Focus on components with read only
- Problem with event handling + F keys
Known Issues
- No offline mode
- Password for SAP or anonymous users cannot be changed
- Anonymous user cannot be changed via e_user
Various security, performance und feature improvements
- Profile Export/Import
- Scale images
- Shortcode handling adjusted
- Set image resolution for CAM
- Localization format for date and time values (EDT)
Bug
- Text and icon alignment incorrect
- Focus on components with read only
- Problem with event handling + F keys
Known Issues
- No offline mode
- Password for SAP or anonymous users cannot be changed
- Anonymous user cannot be changed via e_user
Various security, performance und feature improvements
3.4.2
Apr 15, 2021
New
- Export and import of profiles without MDM
- Global events via F1-F24
- Local Key Events support
- LBL_Message Handling
- Behavior software keyboard under iOS
- Set last used profile on MDM
Bugfix
- Scanning in login screen
- Barcode scanning
- Error with user and password via AppConfig
- Name when renaming or copying profiles
- Input with leading 0
- Scaling of images
Known Issue
- No offline mode
Various feature, performance and security improvements
- Export and import of profiles without MDM
- Global events via F1-F24
- Local Key Events support
- LBL_Message Handling
- Behavior software keyboard under iOS
- Set last used profile on MDM
Bugfix
- Scanning in login screen
- Barcode scanning
- Error with user and password via AppConfig
- Name when renaming or copying profiles
- Input with leading 0
- Scaling of images
Known Issue
- No offline mode
Various feature, performance and security improvements
3.4.1
Dec 21, 2020
New features and improvements
• Authentication options: Basic, SecureSession, ClientCert, WebForm.
• Optimization of configuration screens: navigation, operation, validation, etc.
• No wizard support
• Behavior software keyboard
Bugfix
• Last set focus
• No barcode scan in login screen
• Scanner took too long
• Mandatory Client field
• Back button after logout did not require login
• Two profiles after double click on plus button
• MDM issues
• Authentication options: Basic, SecureSession, ClientCert, WebForm.
• Optimization of configuration screens: navigation, operation, validation, etc.
• No wizard support
• Behavior software keyboard
Bugfix
• Last set focus
• No barcode scan in login screen
• Scanner took too long
• Mandatory Client field
• Back button after logout did not require login
• Two profiles after double click on plus button
• MDM issues
3.4.0
Dec 16, 2020
New features and improvements
• Authentication options: Basic, SecureSession, ClientCert, WebForm.
• Optimization of configuration screens: navigation, operation, validation, etc.
• No wizard support
• Behavior software keyboard
Bugfix
• Last set focus
• No barcode scan in login screen
• Scanner took too long
• Mandatory Client field
• Back button after logout did not require login
• Two profiles after double click on plus button
• Deleting MDM profiles
• Authentication options: Basic, SecureSession, ClientCert, WebForm.
• Optimization of configuration screens: navigation, operation, validation, etc.
• No wizard support
• Behavior software keyboard
Bugfix
• Last set focus
• No barcode scan in login screen
• Scanner took too long
• Mandatory Client field
• Back button after logout did not require login
• Two profiles after double click on plus button
• Deleting MDM profiles
3.3.1
Sep 10, 2020
New functions and Bugfixing:
• Memory Leaks fixed
• Padding was not correct with FRA and MEM
• Orange icon for MSB App preview
• Empty strings in EDT field
• Browser information in dialog box About
Further improvements and solved issues can be found in the mobisys Portal under MSB Release information.
Known Issues:
• Offline
• Scan to Listbox
• Potential Problems with profile updates via MDM
• Potential restrictions with HTM component
• Memory Leaks fixed
• Padding was not correct with FRA and MEM
• Orange icon for MSB App preview
• Empty strings in EDT field
• Browser information in dialog box About
Further improvements and solved issues can be found in the mobisys Portal under MSB Release information.
Known Issues:
• Offline
• Scan to Listbox
• Potential Problems with profile updates via MDM
• Potential restrictions with HTM component
3.3.0
Aug 5, 2020
New functions and bugfixes:
- Padding of text for components
- Background color in components is set to transparent by default
- readonly for MLV component did not trigger events.
- Profile list was not updated correctly.
- Fixed various issues with scanner integration of Zebra, Honeywell and Datalogic
- Standardized scaling behaviour of images of components
For further information please visit our customer portal
- Padding of text for components
- Background color in components is set to transparent by default
- readonly for MLV component did not trigger events.
- Profile list was not updated correctly.
- Fixed various issues with scanner integration of Zebra, Honeywell and Datalogic
- Standardized scaling behaviour of images of components
For further information please visit our customer portal
3.2
Jul 13, 2020
MSB 3 FAQ
Click here to learn how to download MSB 3 in restricted country or region.
Check the following list to see the minimum requirements of MSB 3.
iPhone
Requires iOS 12.0 or later.
iPad
Requires iPadOS 12.0 or later.
iPod touch
Requires iOS 12.0 or later.
MSB 3 supports English, German
