SatCatcher Dish Installation
Satellite Dish Easy Alignement
$2.99
8for iPhone, iPad and more
Age Rating
SatCatcher Dish Installation Screenshots
About SatCatcher Dish Installation
Dish alignment, pointing and Installation has always been a complicated task, especially if you do not have a clue. That is why I posted this application that will simplify this task and allow you to install and align your antenna without the need to call a specialist.
SatCatcher is a satellite finder and dish pointer, it allows you to orient your antenna to any satellite. Using augmented reality, this application displays the target satellite in space to better choose the location of your antenna and ensure the absence of any obstacle (wall, tree ...).
SatCatcher also uses your phone GPS to show your location on a map and shows the direction of the satellite from your position.
The compass accompanied by a beep lets you orient your antenna following the acceleration of beeps or the arrow of the compass.
The accelerometer is used to verify that the holder of your antenna is vertical.
The antenna adjustment steps:
1- choose a satellite and authorize geolocation to determine the direction of the antenna orientation.
2- Show satellite in augmented reality with your camera and make sure there are no obstacles and validate the location of your antenna.
3. Check that the support of your antenna is vertical.
4. Calculate the polarization and adjust the rotation of the LNB (the head of your antenna)
5. Set the elevation
6- Search orientation with visual and sound assistant
7- Fine adjustments.
For the good functioning of the application, SatCatcher will need the camera, compass, gyroscope, accelerometer and the GPS of your smartphone.
tips:
- If your smartphone does not have GPS, you can manually move the "marker" on the card until it points your exact location. Use zoom for more detail.
- The compass is very important to adjust your dish, but if your smartphone does not have one, you can still use the application. In this case, it will help you to find clues and marks on the map from your location. It also allows you to calculate the orientation. Than you can use a manual compass to get a good orientation.
- Do not hesitate to recalibrate the compass and avoid too close to the antenna arm, because it is sensitive to metallic elements. Try to place your smartphone where there is less magnetic interference.
You can use SatCatcher to install your antenna or satellite dish, find and display the different satellites, alignment and orientation of your antenna or satellite dish to any visible satellite.
Contact : infosoftycontactfree@gmail.com
SatCatcher is a satellite finder and dish pointer, it allows you to orient your antenna to any satellite. Using augmented reality, this application displays the target satellite in space to better choose the location of your antenna and ensure the absence of any obstacle (wall, tree ...).
SatCatcher also uses your phone GPS to show your location on a map and shows the direction of the satellite from your position.
The compass accompanied by a beep lets you orient your antenna following the acceleration of beeps or the arrow of the compass.
The accelerometer is used to verify that the holder of your antenna is vertical.
The antenna adjustment steps:
1- choose a satellite and authorize geolocation to determine the direction of the antenna orientation.
2- Show satellite in augmented reality with your camera and make sure there are no obstacles and validate the location of your antenna.
3. Check that the support of your antenna is vertical.
4. Calculate the polarization and adjust the rotation of the LNB (the head of your antenna)
5. Set the elevation
6- Search orientation with visual and sound assistant
7- Fine adjustments.
For the good functioning of the application, SatCatcher will need the camera, compass, gyroscope, accelerometer and the GPS of your smartphone.
tips:
- If your smartphone does not have GPS, you can manually move the "marker" on the card until it points your exact location. Use zoom for more detail.
- The compass is very important to adjust your dish, but if your smartphone does not have one, you can still use the application. In this case, it will help you to find clues and marks on the map from your location. It also allows you to calculate the orientation. Than you can use a manual compass to get a good orientation.
- Do not hesitate to recalibrate the compass and avoid too close to the antenna arm, because it is sensitive to metallic elements. Try to place your smartphone where there is less magnetic interference.
You can use SatCatcher to install your antenna or satellite dish, find and display the different satellites, alignment and orientation of your antenna or satellite dish to any visible satellite.
Contact : infosoftycontactfree@gmail.com
Show More
What's New in the Latest Version 8
Last updated on Feb 20, 2024
Old Versions
- updating APIs
Show More
Version History
8
Feb 20, 2024
- updating APIs
7
Apr 16, 2023
- API updates
- Added compass calibration system
- Addition of the integrated evaluation system
- Some improvements
- Fixed some minor bugs
- Added compass calibration system
- Addition of the integrated evaluation system
- Some improvements
- Fixed some minor bugs
6.0
Mar 20, 2022
- Update of the various integrated APIs
- Improved functionality
- Updated satellite list
- added search satellite button and delete user satellite
- Bug fixes
- Use of the Accelerometer in the absence of the Gyroscope
- Added the possibility of manual calibration for uncalibrated Accelerometers
- Improved functionality
- Updated satellite list
- added search satellite button and delete user satellite
- Bug fixes
- Use of the Accelerometer in the absence of the Gyroscope
- Added the possibility of manual calibration for uncalibrated Accelerometers
41
Nov 29, 2019
64 bit support
improved interaction with the map
improved interaction with the map
3.6
Feb 6, 2019
Improved geolocation and map display
The ability to add GPS position manually
The ability to add GPS position manually
31
Dec 21, 2017
Multilingual: English, French, Spanish, Portuguese, German and Italian.
The possibility of adding satellites.
add Optus 152.0 ° W
to add Arsat 2 at 81.0 ° W
automatic language detection
adding the calibration process
Fixed internet bug
Improved orientation in RA.
The possibility of adding satellites.
add Optus 152.0 ° W
to add Arsat 2 at 81.0 ° W
automatic language detection
adding the calibration process
Fixed internet bug
Improved orientation in RA.
2.21
Dec 22, 2016
Improvements
2.2
Dec 20, 2016
Added satellites
Fixed some bugs
Added functionality
Some improvements
...
Fixed some bugs
Added functionality
Some improvements
...
5
May 5, 2016
- Add 3D animations
- Other ameliorations
- Other ameliorations
1.0
Apr 12, 2016
SatCatcher Dish Installation FAQ
Click here to learn how to download SatCatcher Dish Installation in restricted country or region.
Check the following list to see the minimum requirements of SatCatcher Dish Installation.
iPhone
Requires iOS 12.0 or later.
iPad
Requires iPadOS 12.0 or later.
iPod touch
Requires iOS 12.0 or later.
SatCatcher Dish Installation supports English
