Space Automation for Leviton/HAI
$44.99
1.11for iPhone, iPad
Age Rating
Space Automation for Leviton/HAI Screenshots
About Space Automation for Leviton/HAI
*** Note: Some users have mentioned that you cannot browse units by room, but this is intentional. Space is designed for recent controller firmwares (3.9 and up, although it works with 3.0+). This newer firmware has an Extended Setup feature which allows for virtual Rooms of various devices to be created and browsed with ease within Space. This new Rooms feature is far more customizable than the old HLC room groupings. If your controller is running firmware older than 3.9, we strongly recommend you upgrade to the latest version.
Designed for use with Leviton/HAI home automation systems, Space is the best home automation experience yet! Written from the ground up with ease of use and powerful features in mind, Space is going to bring your home to a new level of comfort and control.
Space is quick. The user interface is optimized for quick navigation and control. Effortlessly browse your home's rooms to control security, climate, audio, lighting, automation, cameras and more.
Space is customizable. Set custom control names, icons and backgrounds with just a few taps to make Space represent the features and feel of your, well... space.
Space is flexible. Space can be configured for a wall mounted device allowing ultimate integration with your home. Space can be taken with you anywhere in the world and let you control your home from wherever you are. Space can be used as a remote control inside your home to control all connected systems, too.
Space lets you know. With the soon-to-be-available Space Server for OS X, you will be able to receive push notifications for any system event including arming, disarming, alarms, troubles, messages or custom notifications.
Control your entire home automation system with the flick of a finger using Space!
Compatible with HAI/Leviton OmniPro II, Omni IIe, Lumina, Lumina Pro and Omni LTe.
Supports PTZ on many camera models, MJPEG/JPEG/RTSP video for IP security cameras.
Continued use of GPS running in the background can dramatically decrease battery life.
(Preview video music by Steve Combs & Delta Is)
Designed for use with Leviton/HAI home automation systems, Space is the best home automation experience yet! Written from the ground up with ease of use and powerful features in mind, Space is going to bring your home to a new level of comfort and control.
Space is quick. The user interface is optimized for quick navigation and control. Effortlessly browse your home's rooms to control security, climate, audio, lighting, automation, cameras and more.
Space is customizable. Set custom control names, icons and backgrounds with just a few taps to make Space represent the features and feel of your, well... space.
Space is flexible. Space can be configured for a wall mounted device allowing ultimate integration with your home. Space can be taken with you anywhere in the world and let you control your home from wherever you are. Space can be used as a remote control inside your home to control all connected systems, too.
Space lets you know. With the soon-to-be-available Space Server for OS X, you will be able to receive push notifications for any system event including arming, disarming, alarms, troubles, messages or custom notifications.
Control your entire home automation system with the flick of a finger using Space!
Compatible with HAI/Leviton OmniPro II, Omni IIe, Lumina, Lumina Pro and Omni LTe.
Supports PTZ on many camera models, MJPEG/JPEG/RTSP video for IP security cameras.
Continued use of GPS running in the background can dramatically decrease battery life.
(Preview video music by Steve Combs & Delta Is)
Show More
What's New in the Latest Version 1.11
Last updated on Jun 26, 2015
Old Versions
- Camera authentication fixes
- Improves camera video streaming reliability
- Added support for setting flag values
- Fixed a crash when removing a controller
- Fixes a crash in Rooms/Control
- Fixes on/off buttons missing on X10 units
- Improves camera video streaming reliability
- Added support for setting flag values
- Fixed a crash when removing a controller
- Fixes a crash in Rooms/Control
- Fixes on/off buttons missing on X10 units
Show More
Version History
1.11
Jun 26, 2015
- Camera authentication fixes
- Improves camera video streaming reliability
- Added support for setting flag values
- Fixed a crash when removing a controller
- Fixes a crash in Rooms/Control
- Fixes on/off buttons missing on X10 units
- Improves camera video streaming reliability
- Added support for setting flag values
- Fixed a crash when removing a controller
- Fixes a crash in Rooms/Control
- Fixes on/off buttons missing on X10 units
1.1
Jun 3, 2015
- Added support for Somfy SDN/URTSI shades
- Added emergency actions to Security view
- Added long press gesture emergency menu to Security home page icon
- Added long press gesture All On/Off to Rooms, Control, Audio home page icons
- Added support for dim/brighten on Standard units
- Added section separators in icon lists
- UI tweaks
- Disconnected climate sensors now display N/A instead of really low value
- Auxiliary climate sensors in range/limit status is now more accurate
- Removed "not ready" status bar notices on auxiliary (climate) sensors
- Fixed cameras removed from Extended Setup not being removed from Space until Space is restarted
- Fixed intermittent issues with entering beacon UDIDs/controller private keys
- Fixed a crash when refereshing the events list
- Stability improvements
- Added emergency actions to Security view
- Added long press gesture emergency menu to Security home page icon
- Added long press gesture All On/Off to Rooms, Control, Audio home page icons
- Added support for dim/brighten on Standard units
- Added section separators in icon lists
- UI tweaks
- Disconnected climate sensors now display N/A instead of really low value
- Auxiliary climate sensors in range/limit status is now more accurate
- Removed "not ready" status bar notices on auxiliary (climate) sensors
- Fixed cameras removed from Extended Setup not being removed from Space until Space is restarted
- Fixed intermittent issues with entering beacon UDIDs/controller private keys
- Fixed a crash when refereshing the events list
- Stability improvements
1.07
Apr 19, 2015
- Audio zone volume percentage is now displayed below volume slider
- Fixed disabled auxiliary sensor low/high setpoints to display correctly
- Renamed lights to units in Room "units on" count
- Stability improvements
- iOS 8.3 related fixes
- Fixed disabled auxiliary sensor low/high setpoints to display correctly
- Renamed lights to units in Room "units on" count
- Stability improvements
- iOS 8.3 related fixes
1.06
Mar 30, 2015
- Fixed a common crash when using the Show Controllers setting
1.05
Mar 18, 2015
- Added ability to control a primary security area from the home screen
- Added labels under home screen icons
- Added room # of units ON display in Rooms section
- Added mode to thermostat display
- Added option to turn off perimeter beeps in Settings
- Added ability to set Stream # for camera servers
- Added ability to change camera # for cameras defined in Space
- Added support for Vivotek cameras
- The Space configuration file can now be copied/backed up via iTunes File Access
- Fixed compatibility with many RTSP cameras (switched to TCP streaming)
- Stability improvements
- Improved JPEG camera support
- Improved camera video quality on some cameras
- Fixes crash when viewing a room that contains a User Setting item
- Fixed thermostat color potentially not being changed after heating/cooling is done
- Graphical tweaks
- Added labels under home screen icons
- Added room # of units ON display in Rooms section
- Added mode to thermostat display
- Added option to turn off perimeter beeps in Settings
- Added ability to set Stream # for camera servers
- Added ability to change camera # for cameras defined in Space
- Added support for Vivotek cameras
- The Space configuration file can now be copied/backed up via iTunes File Access
- Fixed compatibility with many RTSP cameras (switched to TCP streaming)
- Stability improvements
- Improved JPEG camera support
- Improved camera video quality on some cameras
- Fixes crash when viewing a room that contains a User Setting item
- Fixed thermostat color potentially not being changed after heating/cooling is done
- Graphical tweaks
1.04
Jan 22, 2015
- Fixes crash when viewing some cameras
1.03
Jan 13, 2015
- Fixed PTZ mirror/flip options not working
- Fixed potential PTZ crash introduced in 1.02
- Fixed potential PTZ crash introduced in 1.02
1.02
Jan 12, 2015
- Fixed a potential crash when attempting to change an audio source
- Removed duplciate Foscam entry in camera list
- Removed duplciate Foscam entry in camera list
1.01
Jan 10, 2015
- Fixes iBeacon major/minor matching not working
- Fixed a potential crash when attempting to change an audio source
- Fixed a potential hang when the user interface text size is set to Large in iOS
- Fixed an issue where audio sources were watched for metadata when it was not needed
- Fixed an issue that could prevent some cameras from working if they were loaded from the controller's Extended Setup
- Fixed access controls not showing correct status color
- Fixed some issues with editing iBeacon triggers
- Note: You may need to set the camera number to 0 on Axis cameras if they were loaded from Extended Setup using Space 1.0
- Fixed a potential crash when attempting to change an audio source
- Fixed a potential hang when the user interface text size is set to Large in iOS
- Fixed an issue where audio sources were watched for metadata when it was not needed
- Fixed an issue that could prevent some cameras from working if they were loaded from the controller's Extended Setup
- Fixed access controls not showing correct status color
- Fixed some issues with editing iBeacon triggers
- Note: You may need to set the camera number to 0 on Axis cameras if they were loaded from Extended Setup using Space 1.0
1.0
Jan 6, 2015
Space Automation for Leviton/HAI FAQ
Click here to learn how to download Space Automation for Leviton/HAI in restricted country or region.
Check the following list to see the minimum requirements of Space Automation for Leviton/HAI.
iPhone
iPad
Space Automation for Leviton/HAI supports English
