TOOL plus (Pro) ¶

1. Timer status optimization.
2. Or you can select the checkbox in the lower left corner to cancel the timer progress animation.
3. Support iOS 17.4.1

In this updated version, there are many promotional free codes that can be found and redeemed in the APP, and you can distribute it to your relatives and friends. Quantity is limited!

1. You can click on the Taiwan map area to update the battery status.
2. Support iOS 17.4

1. Added an appropriate delay so that when using the Auto Refresh location button, you have enough time to manually select the web version of geolocation first, and both can update the current location at the same time.
2.Support iOS 17.3.1

1. After opening the Live Music function page, shake your phone to quickly and easily return to the main page.
2. It is recommended to use it together with the Shake phone [turn on Music] function.

1. After using the QR Code generator, shake your phone to quickly save photo files.
2. You can use the Map View feature and shake your phone to manually update the current geographical location.
3. Support iOS 17.2.1

1. New feature: When using the Makeup Mirror, you can use two fingers to zoom in and take photos to save.
2. Slide the brightness slider of the Makeup Mirror down to the minimum brightness and the snapshot function will be set. After the setting is successful, there will be a vibration reminder. A button will appear next time you open the Makeup Mirror. Slide to maximum brightness to cancel the snapshot button display.

1. A new feature has been added. When using the Sound Meter function, if your preset decibel value is exceeded, the sound content of Voice / Recorder_1 will be triggered.
2. After setting the decibel value, you can press the phone vibration icon button in the upper right corner to trigger this function. You can also select the checkbox in the lower left corner to keep the current brightness value.

New features have been added:
1. Shake your phone to turn on Music and Alert.
2. Use the slider to lock it and the shake phone function will be deactivated.
3. Bug fixes.

1. When using Sound Meter function, it supports synchronous screen flashing function and warning sound. You can first press the dB button in the lower right corner, and then press the Taiwan button in the lower left corner. (you can press it again to stop the screen flashing). The +1 and -1 buttons will appear. Then press the +1 button first to set the decibel value. (you can press the LED switch button in the lower left corner to turn on the LED flashing function). After deciding the decibel value, slide the slider to the right to the maximum brightness for final confirmation to complete the setting.
2. You can choose to press the TXG button in the lower right corner to synchronize with the LED. You can also shake the phone to do reverse synchronization.
3. You can press the volume button "+" to set the warning sound or press the volume button "-" to cancel the warning sound.

1. Added Random PWM LED function. When using it, first turn on the LED flashing switch in the lower left corner, and then turn on the Random PWM LED function. If the setting is successful, there will be a vibration reminder.
2. The random flashing status will be updated every three seconds. You can also turn the screen light on or off by shaking your phone.
3. Press the volume "+" to set it to 4 seconds, press the volume "-" to set it to 2 seconds. Slide the slider to the maximum brightness and it will return to the default value of 3 seconds.

1. Added PWM LED function, which can display five frequency states.
2. PWM LED adjustable frequencies are: 2Hz, 3Hz, 6Hz, 10Hz and 18Hz.
3. Bug fixes.

1. Added a new PWM LED function. You can activate the LED through the switch in the lower left corner, and then activate the PWM LED function. There will be a vibration reminder if the setting is successful. Then slide the slider to the right to trigger. You can also shake the phone and the screen lights will flash simultaneously.
2. You can switch to Reverse Mode by selecting the checkbox in the lower left corner.
3. PWM LED has five frequency modes to choose from: 1Hz, 3Hz, 8Hz, 11Hz and 20Hz.
4. Support iOS 17.1.1

1. The location update rate is modified to 3 seconds.
2. NOTE function has been added to display the total number of files.

Added a new Auto Refresh button function for your location, which will automatically update your location every four seconds.

1. When using the NOTE function, you can shake the phone to delete all files at once.
2. NOTE function also supports Random Reading Mode. You can tap three times and the background will change from white to red, switching to Random Reading Mode.

Swipe from the left and right edges of the screen to quickly access where your photos are stored. Press the mute button "X" to disable screen edge swiping.

Added statistical display of the maximum and minimum differences among the three states when using the Random LED function.

Fixed the problem of easy accidental touch in Black Screen Mode. Modified to tap the screen five times to exit the Black Screen Mode function.

1. When using the Whiteboard function, shake the phone to change the background color.
2. If you only want to remove the arrow indicator without resetting the counter to 0, you can press the mute button "X" which will only remove the arrow indicator.

1. When using the Random LED function, shake the phone and the screen light source will be synchronized with the Random LED. Shaking the phone again will cancel the sync. After canceling, if the screen continues to flash, you can press the Taiwan button in the lower left corner to stop the screen flashing.
2.Support iOS 17.1

1. Three random LED states can display the percentage.
2. Bug fixes.

The Random LED default seconds changes every 3 seconds. Now you can press "Volume +" to set it to 4 seconds or press "Volume -" to set it to 2 seconds. Slide the slider to maximum brightness to return to the default value of 3 seconds.

1. Added statistical function of three random LED states.
2. When the Random Number Generator and Sound Meter are executed simultaneously, and the external sound decibel value is only 1dB greater than the random threshold, the LED will light up. You can quickly set it to Reverse Mode by shaking your phone. That is, if the external decibel value is lower than the random threshold, the LED will light up.

1. The new feature uses a Random Number Generator to light up the LED. There are three states: dark, bright, and flashing, which are randomly generated. After the setting is successful, there will be a vibration to remind the user.
2. Another feature is a combined Random Number Generator and Sound Meter. This new version also adds the function of using only a Random Number Generator to operate alone, so it has no connection with external environmental sounds.
3. Three different vibration lengths correspond to three LED lighting modes. You can also choose to turn off the three preset vibration modes or press the LED switch button in the lower left corner to turn off the LED function. Or you can press the arrow clear button to restore the default values.