BLEASS Flanger AUv3 Plugin
Ampliación de bridas sónicas
USD 7.99
1.0for iPhone, iPad and more
Age Rating
لقطات الشاشة لـ BLEASS Flanger AUv3 Plugin
About BLEASS Flanger AUv3 Plugin
BLEASS Flanger es un efecto de flanger de sonido rico que ofrece una amplia gama de modulaciones sincronizadas cuyos colores suenan de una manera novedosa y única gracias a sus complejas combinaciones algorítmicas.
Hay tres etapas de modulación, así como dos LFO, que combinados ofrecen una gran versatilidad sonora, desde los clásicos sonidos de flanger sinusoidal hasta modulaciones rítmicas locas, cortesía de sus 6 formas de LFO diferentes.
La capacidad de sincronizar fácilmente el efecto de flanger con el ritmo lo hace ideal para traer variaciones sutiles de flanging mientras evoluciona armoniosamente con la dinámica de una canción.
Nuestro diseño de interfaz habitual hace que la interfaz de usuario sea fluida y eficiente con comentarios visuales claros, lo que aumenta el disfrute y la capacidad de reproducción del diseño de sonido.
Al igual que con otros complementos de BLEASS, BLEASS Flanger tiene un uso muy bajo de la CPU y funciona en todos los hosts compatibles.
_____TECHNICAL DESCRIPTION:
INPUT stage:
- Low-shelf/High-pass input filter
- Input gain
LFO A stage: (This LFO modulates DELAY TIME)
- SYNC: sets LFO’s synchronization between BEAT SYNC and FREE SYNC
- RATE: sets LFO’s rate
- OFFSET: when BEAT SYNC mode is activated, sets LFO’s offset relatively to the beat
- SHAPE: select LFO’s shape between sine, triangle, sawtooth, inverted sawtooth, square and random
- PHASE: sets offset between the LFO’s two stereo channels
- DEPTH: sets LFO’s amount as a percentage of DELAY TIME’s value
- STEREO METER: represents LFO’s state
LFO B stage: (This LFO can modulate either DELAY TIME, DELAY FEEDBACK or DELAY WIDTH)
- SYNC: sets the LFO’s synchronization between BEAT and FREE
- RATE: sets the LFO’s rate
- OFFSET: if SYNC is set to BEAT, sets LFO’s offset relatively to the beat
- SHAPE: select LFO’s shape between sine, triangle, sawtooth, inverted sawtooth, square and random
- PHASE: sets offset between LFO’s two channels
- DESTINATION: sets the LFO’s destination between DELAY TIME, FEEDBACK and WIDTH
- DEPTH: sets LFO’s amount as a percentage of DESTINATION’s value
- METER: represents LFO’s state (depending on the selected modulation destination)
ENVELOPE FOLLOWER stage: (modulates DELAY TIME depending on the input signal’s level)
- AMOUNT: sets the amount of modulation as a percentage of DELAY TIME’s value
- ATTACK: sets the attack of the follower
- RELEASE: sets the release of the follower
DELAY stage:
- TIME: sets average delay time
- FEEDBACK: sets average delay feedback
- WIDTH: sets delay time’s difference between both channels (and average delay time when width is modulated by LFO B)
MIX stage:
- POLARITY: if set to “+“, wet signal is added to the dry signal, if set to “-“, wet signal is subtracted to the dry signal
- DRY/WET: sets the amount of wet signal added (or subtracted) to the dry signal
Check out www.bleass.com for video tutorials and demos!
* PLEASE NOTE: this is an Audio Unit Effect plugin (AUv3) which requires a compatible host such as AUM, Audiobus, GarageBand, Cubasis, BM3 and Auria. You can also use the BLEASS Flanger as a standalone app using headphones, a mic or an external sound card. *
Hay tres etapas de modulación, así como dos LFO, que combinados ofrecen una gran versatilidad sonora, desde los clásicos sonidos de flanger sinusoidal hasta modulaciones rítmicas locas, cortesía de sus 6 formas de LFO diferentes.
La capacidad de sincronizar fácilmente el efecto de flanger con el ritmo lo hace ideal para traer variaciones sutiles de flanging mientras evoluciona armoniosamente con la dinámica de una canción.
Nuestro diseño de interfaz habitual hace que la interfaz de usuario sea fluida y eficiente con comentarios visuales claros, lo que aumenta el disfrute y la capacidad de reproducción del diseño de sonido.
Al igual que con otros complementos de BLEASS, BLEASS Flanger tiene un uso muy bajo de la CPU y funciona en todos los hosts compatibles.
_____TECHNICAL DESCRIPTION:
INPUT stage:
- Low-shelf/High-pass input filter
- Input gain
LFO A stage: (This LFO modulates DELAY TIME)
- SYNC: sets LFO’s synchronization between BEAT SYNC and FREE SYNC
- RATE: sets LFO’s rate
- OFFSET: when BEAT SYNC mode is activated, sets LFO’s offset relatively to the beat
- SHAPE: select LFO’s shape between sine, triangle, sawtooth, inverted sawtooth, square and random
- PHASE: sets offset between the LFO’s two stereo channels
- DEPTH: sets LFO’s amount as a percentage of DELAY TIME’s value
- STEREO METER: represents LFO’s state
LFO B stage: (This LFO can modulate either DELAY TIME, DELAY FEEDBACK or DELAY WIDTH)
- SYNC: sets the LFO’s synchronization between BEAT and FREE
- RATE: sets the LFO’s rate
- OFFSET: if SYNC is set to BEAT, sets LFO’s offset relatively to the beat
- SHAPE: select LFO’s shape between sine, triangle, sawtooth, inverted sawtooth, square and random
- PHASE: sets offset between LFO’s two channels
- DESTINATION: sets the LFO’s destination between DELAY TIME, FEEDBACK and WIDTH
- DEPTH: sets LFO’s amount as a percentage of DESTINATION’s value
- METER: represents LFO’s state (depending on the selected modulation destination)
ENVELOPE FOLLOWER stage: (modulates DELAY TIME depending on the input signal’s level)
- AMOUNT: sets the amount of modulation as a percentage of DELAY TIME’s value
- ATTACK: sets the attack of the follower
- RELEASE: sets the release of the follower
DELAY stage:
- TIME: sets average delay time
- FEEDBACK: sets average delay feedback
- WIDTH: sets delay time’s difference between both channels (and average delay time when width is modulated by LFO B)
MIX stage:
- POLARITY: if set to “+“, wet signal is added to the dry signal, if set to “-“, wet signal is subtracted to the dry signal
- DRY/WET: sets the amount of wet signal added (or subtracted) to the dry signal
Check out www.bleass.com for video tutorials and demos!
* PLEASE NOTE: this is an Audio Unit Effect plugin (AUv3) which requires a compatible host such as AUM, Audiobus, GarageBand, Cubasis, BM3 and Auria. You can also use the BLEASS Flanger as a standalone app using headphones, a mic or an external sound card. *
Show More
تحديث لأحدث إصدار 1.0
Last updated on 25/08/2020
Version History
1.0
18/08/2020
BLEASS Flanger AUv3 Plugin FAQ
انقر هنا لمعرفة كيفية تنزيل BLEASS Flanger AUv3 Plugin في بلد أو منطقة محظورة.
تحقق من القائمة التالية لمعرفة الحد الأدنى من المتطلبات BLEASS Flanger AUv3 Plugin.
iPhone
Requiere iOS 11.0 o posterior.
iPad
Requiere iPadOS 11.0 o posterior.
iPod touch
Requiere iOS 11.0 o posterior.
BLEASS Flanger AUv3 Plugin هي مدعومة على اللغات Inglés