BLEASS Flanger AUv3 Plugin
Umfangreiches Sonic Flanging
8,99 €Best Deal Ever
1.0for iPhone, iPad and more
Age Rating
BLEASS Flanger AUv3 Plugin Screenshots
About BLEASS Flanger AUv3 Plugin
BLEASS Flanger ist ein reich klingender Flanging-Effekt, der eine breite Palette synchronisierter Modulationen bietet, die dank ihrer komplexen algorithmischen Kombinationen den Klang auf neuartige und einzigartige Weise färben.
Es gibt drei Modulationsstufen sowie zwei LFOs, die zusammen eine große klangliche Vielseitigkeit bieten - von klassischen Sinusflanger-Sounds bis zu verrückten rhythmischen Modulationen dank der 6 verschiedenen LFO-Formen.
Die Fähigkeit, den Flanging-Effekt leicht mit dem Beat zu synchronisieren, macht es ideal, subtile Flanging-Variationen zu erzielen und sich gleichzeitig harmonisch mit der Dynamik eines Songs zu entwickeln.
Unser übliches Interface-Design sorgt für eine reibungslose und effiziente Benutzeroberfläche mit klarem visuellen Feedback und erhöht den Spaß und die Spielbarkeit des Sounddesigns.
Wie bei anderen BLEASS-Plugins ist die CPU-Auslastung von BLEASS Flanger sehr gering und funktioniert auf allen kompatiblen Hosts.
_____TECHNICAL DESCRIPTION:
INPUT stage:
- Low-shelf/High-pass input filter
- Input gain
LFO A stage: (This LFO modulates DELAY TIME)
- SYNC: sets LFO’s synchronization between BEAT SYNC and FREE SYNC
- RATE: sets LFO’s rate
- OFFSET: when BEAT SYNC mode is activated, sets LFO’s offset relatively to the beat
- SHAPE: select LFO’s shape between sine, triangle, sawtooth, inverted sawtooth, square and random
- PHASE: sets offset between the LFO’s two stereo channels
- DEPTH: sets LFO’s amount as a percentage of DELAY TIME’s value
- STEREO METER: represents LFO’s state
LFO B stage: (This LFO can modulate either DELAY TIME, DELAY FEEDBACK or DELAY WIDTH)
- SYNC: sets the LFO’s synchronization between BEAT and FREE
- RATE: sets the LFO’s rate
- OFFSET: if SYNC is set to BEAT, sets LFO’s offset relatively to the beat
- SHAPE: select LFO’s shape between sine, triangle, sawtooth, inverted sawtooth, square and random
- PHASE: sets offset between LFO’s two channels
- DESTINATION: sets the LFO’s destination between DELAY TIME, FEEDBACK and WIDTH
- DEPTH: sets LFO’s amount as a percentage of DESTINATION’s value
- METER: represents LFO’s state (depending on the selected modulation destination)
ENVELOPE FOLLOWER stage: (modulates DELAY TIME depending on the input signal’s level)
- AMOUNT: sets the amount of modulation as a percentage of DELAY TIME’s value
- ATTACK: sets the attack of the follower
- RELEASE: sets the release of the follower
DELAY stage:
- TIME: sets average delay time
- FEEDBACK: sets average delay feedback
- WIDTH: sets delay time’s difference between both channels (and average delay time when width is modulated by LFO B)
MIX stage:
- POLARITY: if set to “+“, wet signal is added to the dry signal, if set to “-“, wet signal is subtracted to the dry signal
- DRY/WET: sets the amount of wet signal added (or subtracted) to the dry signal
Check out www.bleass.com for video tutorials and demos!
* PLEASE NOTE: this is an Audio Unit Effect plugin (AUv3) which requires a compatible host such as AUM, Audiobus, GarageBand, Cubasis, BM3 and Auria. You can also use the BLEASS Flanger as a standalone app using headphones, a mic or an external sound card. *
Es gibt drei Modulationsstufen sowie zwei LFOs, die zusammen eine große klangliche Vielseitigkeit bieten - von klassischen Sinusflanger-Sounds bis zu verrückten rhythmischen Modulationen dank der 6 verschiedenen LFO-Formen.
Die Fähigkeit, den Flanging-Effekt leicht mit dem Beat zu synchronisieren, macht es ideal, subtile Flanging-Variationen zu erzielen und sich gleichzeitig harmonisch mit der Dynamik eines Songs zu entwickeln.
Unser übliches Interface-Design sorgt für eine reibungslose und effiziente Benutzeroberfläche mit klarem visuellen Feedback und erhöht den Spaß und die Spielbarkeit des Sounddesigns.
Wie bei anderen BLEASS-Plugins ist die CPU-Auslastung von BLEASS Flanger sehr gering und funktioniert auf allen kompatiblen Hosts.
_____TECHNICAL DESCRIPTION:
INPUT stage:
- Low-shelf/High-pass input filter
- Input gain
LFO A stage: (This LFO modulates DELAY TIME)
- SYNC: sets LFO’s synchronization between BEAT SYNC and FREE SYNC
- RATE: sets LFO’s rate
- OFFSET: when BEAT SYNC mode is activated, sets LFO’s offset relatively to the beat
- SHAPE: select LFO’s shape between sine, triangle, sawtooth, inverted sawtooth, square and random
- PHASE: sets offset between the LFO’s two stereo channels
- DEPTH: sets LFO’s amount as a percentage of DELAY TIME’s value
- STEREO METER: represents LFO’s state
LFO B stage: (This LFO can modulate either DELAY TIME, DELAY FEEDBACK or DELAY WIDTH)
- SYNC: sets the LFO’s synchronization between BEAT and FREE
- RATE: sets the LFO’s rate
- OFFSET: if SYNC is set to BEAT, sets LFO’s offset relatively to the beat
- SHAPE: select LFO’s shape between sine, triangle, sawtooth, inverted sawtooth, square and random
- PHASE: sets offset between LFO’s two channels
- DESTINATION: sets the LFO’s destination between DELAY TIME, FEEDBACK and WIDTH
- DEPTH: sets LFO’s amount as a percentage of DESTINATION’s value
- METER: represents LFO’s state (depending on the selected modulation destination)
ENVELOPE FOLLOWER stage: (modulates DELAY TIME depending on the input signal’s level)
- AMOUNT: sets the amount of modulation as a percentage of DELAY TIME’s value
- ATTACK: sets the attack of the follower
- RELEASE: sets the release of the follower
DELAY stage:
- TIME: sets average delay time
- FEEDBACK: sets average delay feedback
- WIDTH: sets delay time’s difference between both channels (and average delay time when width is modulated by LFO B)
MIX stage:
- POLARITY: if set to “+“, wet signal is added to the dry signal, if set to “-“, wet signal is subtracted to the dry signal
- DRY/WET: sets the amount of wet signal added (or subtracted) to the dry signal
Check out www.bleass.com for video tutorials and demos!
* PLEASE NOTE: this is an Audio Unit Effect plugin (AUv3) which requires a compatible host such as AUM, Audiobus, GarageBand, Cubasis, BM3 and Auria. You can also use the BLEASS Flanger as a standalone app using headphones, a mic or an external sound card. *
Show More
Was ist neu in der neuesten Version 1.0
Last updated on Aug 25, 2020
Version History
1.0
Aug 18, 2020
BLEASS Flanger AUv3 Plugin Preis
Heute:
8,99 €
Am günstigsten:
8,99 €
Am teuersten:
9,99 €
BLEASS Flanger AUv3 Plugin FAQ
Klicken Sie hier, um zu erfahren, wie Sie BLEASS Flanger AUv3 Plugin in eingeschränkten Ländern oder Regionen herunterladen können.
Überprüfen Sie die folgende Liste, um die Mindestanforderungen von BLEASS Flanger AUv3 Plugin zu sehen.
iPhone
Erfordert iOS 11.0 oder neuer.
iPad
Erfordert iPadOS 11.0 oder neuer.
iPod touch
Erfordert iOS 11.0 oder neuer.
BLEASS Flanger AUv3 Plugin unterstützt Englisch