Dräger Gas Detection Training
Gratis
1.8.9for iPhone, iPad and more
3.9
1 Ratings
Draegerwerk AG & Co. KGaA
Developer
70.9 MB
Size
25/04/2024
Update Date
Education
Category
4+
Age Rating
Age Rating
لقطات الشاشة لـ Dräger Gas Detection Training
About Dräger Gas Detection Training
Application instructions for the Dräger Gas Detection Training App
The Dräger Gas Detection Training App simulates various gas measuring devices in a trainer/trainee situation. The devices must be on the same WLAN (e.g. "hotspot" of a smartphone) to conduct training.
Use with one mobile device:
If you only have one mobile device available, use demo mode to simulate gas alarms from gas measuring devices on a mobile device.
Use with multiple mobile devices:
To start trainer or student mode, you first need to enter a username.
You should be logged on to one of the devices as a trainer.
The other devices should be started in student mode.
After the trainer has logged on, a selection of various gas detectors is displayed. The training begins once a device has been selected. From this point on the students can log on with the trainer.
The trainer can then send gas values to the student devices for the various gas detector sensors by selecting the current gas value. There is then the option of changing the value or using one of three preset values. Two of these values correspond to an alarm situation (A1, A2). These values are sent directly to the student devices.
The students view the gas detector on the display once they have started the training. They are shown a simulation of the gas detector alarm status on their mobile device with sound and vibration. The visual display (LEDs and display) of the gas detector is shown on the device display.
The trainer can also trigger device alarms (warning, fault and battery alarm) by tapping the values field of the “Device error”.
The student can clear alarms on the display if permitted.
Within the app it is possible to create customized instrument settings (sensors, alarm levels and alarm acknowledgement) and customized scenarios for defined instruments for training.
The Dräger Gas Detection Training App simulates various gas measuring devices in a trainer/trainee situation. The devices must be on the same WLAN (e.g. "hotspot" of a smartphone) to conduct training.
Use with one mobile device:
If you only have one mobile device available, use demo mode to simulate gas alarms from gas measuring devices on a mobile device.
Use with multiple mobile devices:
To start trainer or student mode, you first need to enter a username.
You should be logged on to one of the devices as a trainer.
The other devices should be started in student mode.
After the trainer has logged on, a selection of various gas detectors is displayed. The training begins once a device has been selected. From this point on the students can log on with the trainer.
The trainer can then send gas values to the student devices for the various gas detector sensors by selecting the current gas value. There is then the option of changing the value or using one of three preset values. Two of these values correspond to an alarm situation (A1, A2). These values are sent directly to the student devices.
The students view the gas detector on the display once they have started the training. They are shown a simulation of the gas detector alarm status on their mobile device with sound and vibration. The visual display (LEDs and display) of the gas detector is shown on the device display.
The trainer can also trigger device alarms (warning, fault and battery alarm) by tapping the values field of the “Device error”.
The student can clear alarms on the display if permitted.
Within the app it is possible to create customized instrument settings (sensors, alarm levels and alarm acknowledgement) and customized scenarios for defined instruments for training.
Show More
تحديث لأحدث إصدار 1.8.9
Last updated on 25/04/2024
الإصدارات القديمة
- Nuevos dispositivos: X-am 2800 y X-am 5800
- Corrección de errores y mejoras
- Corrección de errores y mejoras
Show More
Version History
1.8.9
25/04/2024
- Nuevos dispositivos: X-am 2800 y X-am 5800
- Corrección de errores y mejoras
- Corrección de errores y mejoras
1.7.0
18/01/2022
Con esta versión preparamos la app para el futuro, con cambios y mejoras en la base de la app.
Además, a partir de ahora todas las funcionalidades de la app están desbloqueadas sin necesidad de introducir el código de desbloqueo.
Además, a partir de ahora todas las funcionalidades de la app están desbloqueadas sin necesidad de introducir el código de desbloqueo.
1.6.3
17/02/2020
Arreglado un error
1.6.1
08/07/2019
- added 64 bit support
1.6.0
02/04/2019
¡Gracias por utilizar la aplicación "Dräger Gas Detection Training"!
Esta versión incluye los siguientes cambios:
+ Extensión: Dräger X-am 8000
+ Extensión: Dräger X-am 3500
+ Correcciones generales
Esta versión incluye los siguientes cambios:
+ Extensión: Dräger X-am 8000
+ Extensión: Dräger X-am 3500
+ Correcciones generales
1.5.3
12/04/2018
Nuevos dispositivos Dräger Pac 6000/6500 y Dräger Pac 8000/8500
Correcciones
Correcciones
1.4.1
25/01/2018
New Icon
1.4.0
30/03/2017
Nuevo:
- Nuevo icono de la aplicación
- Función de zoom para X-am 7000 pantalla
- Hasta 12 fases por sus propios escenarios
- Mejoras generales
- Nuevo icono de la aplicación
- Función de zoom para X-am 7000 pantalla
- Hasta 12 fases por sus propios escenarios
- Mejoras generales
1.3.0
15/12/2016
¡Muchas gracias por su interés en la aplicación Dräger Gas Detection Training!
Esta versión contiene las siguientes mejoras y cambios:
- Adaptación de las condiciones de licencia / indicaciones de protección de datos
- Más selección para gases inflamables para CatEx- e IR- sensores
- Representación del símbolo de pila para X-am
- Algunas mejoras generales pequeñas
- Eliminaciones de falta
Esta versión contiene las siguientes mejoras y cambios:
- Adaptación de las condiciones de licencia / indicaciones de protección de datos
- Más selección para gases inflamables para CatEx- e IR- sensores
- Representación del símbolo de pila para X-am
- Algunas mejoras generales pequeñas
- Eliminaciones de falta
1.1.11
01/06/2016
- new languages: French and Spanish (will be automatically used based language settings of the phone)
- adaptation for iOS 9
- small improvements of the app
Please use the activation code under settings of the app to release additional functions in your app: configure your own training instruments (sensors, alarm limits) and create own training scenarios.
- adaptation for iOS 9
- small improvements of the app
Please use the activation code under settings of the app to release additional functions in your app: configure your own training instruments (sensors, alarm limits) and create own training scenarios.
1.1.2
01/09/2015
New functions:
-Creation of custom configurations for devices possible. This includes sensor set-up, alarm levels and behaviour during alarm acknowledgment..
-Creation of custom configurations for (training) scenarios possible. This allows the individual creation of training scenarios with multiple gas reading changes on one button press for the trainer.
-For this functions an activation code is needed. The code can be requested from Dräger via an link out of the app.
Smaller bugs in the app have been removed.
Comments for practical usage:
-The needed WLAN can be created via a standard home router or via a “hotspot” of a smartphone.
-You can increase robustness of the smartphone with an outdoor cover.
-The focus of the app is the „remote control“ of gas detector simulations and the resulting correct action depending on the presented gas values. The topics of „instrument menu“ and „service“ are recommend to cover with real detectors. These topics are not part of the app.
-
Examples for the applications of the app:
-Classroom trainings
-Fire Service training scenarios
-Usage as simulator for carbonmonoxid detectors in ambulance/emergency trainings
-Competitions of mine resuce teams
-Trainings in the industry
-Creation of custom configurations for devices possible. This includes sensor set-up, alarm levels and behaviour during alarm acknowledgment..
-Creation of custom configurations for (training) scenarios possible. This allows the individual creation of training scenarios with multiple gas reading changes on one button press for the trainer.
-For this functions an activation code is needed. The code can be requested from Dräger via an link out of the app.
Smaller bugs in the app have been removed.
Comments for practical usage:
-The needed WLAN can be created via a standard home router or via a “hotspot” of a smartphone.
-You can increase robustness of the smartphone with an outdoor cover.
-The focus of the app is the „remote control“ of gas detector simulations and the resulting correct action depending on the presented gas values. The topics of „instrument menu“ and „service“ are recommend to cover with real detectors. These topics are not part of the app.
-
Examples for the applications of the app:
-Classroom trainings
-Fire Service training scenarios
-Usage as simulator for carbonmonoxid detectors in ambulance/emergency trainings
-Competitions of mine resuce teams
-Trainings in the industry
1.0
05/06/2015
Dräger Gas Detection Training FAQ
انقر هنا لمعرفة كيفية تنزيل Dräger Gas Detection Training في بلد أو منطقة محظورة.
تحقق من القائمة التالية لمعرفة الحد الأدنى من المتطلبات Dräger Gas Detection Training.
iPhone
Requiere iOS 12.0 o posterior.
iPad
Requiere iPadOS 12.0 o posterior.
iPod touch
Requiere iOS 12.0 o posterior.
Dräger Gas Detection Training هي مدعومة على اللغات Español, Alemán, Francés
