Steel Beams Bulk Checker
USD 2.99
4.7for iPhone, iPad and more
Age Rating
لقطات الشاشة لـ Steel Beams Bulk Checker
About Steel Beams Bulk Checker
Steel Beams Bulk Checker is a fast & easy to use parametric beam checker. Forget the trial and error, no need to select specific beams properties or designations & test one by one for criteria. Here you only need to enter the problem parameters & type of section you need & the app will find all the sections that meet shear, bending & deflection criteria! The results can be sorted by weight, depth, inertia, moduli.
You can literally obtain an optimal design in less than a minute.
FEATURES:
- Contains the latest AISC v14 Database.
- Supports both US Custom or Metric Unit systems.
- Searchable & Sortable Results page
- Works with any Yield value up to 65ksi / 450 MPa.
- Select whether or not the self-weight of each beam is to be considered.
- Define bracing @ Beam Ends, Half or Quarter of span, or fully braced.
- Solve for All, first 10 or 50 sections for a given type (in increasing weight order), saving calculation time for shape types with a large number of designations (W, HSS, 2L, etc)
- All your preferences are instantly saved, no need to re-enter a value that does not change between problems.
- Detail window reports max moment and shear, bending & allowed bending stress, shear & allowed shear stress, deflections and problem set-up summary.
- Solve for point load at mid-span or distributed load.
ASD9 based solver
The application checks for bending & shear stresses as the passing criteria. It also reports deflections, it's to the user, however, to decide whether the deflections are within acceptable limits.
Only singly or doubly symmetric shapes are considered, hence, single angles are not included in this release. Double angles (2L) sections are included BUT assumed to be under continuos contact.
Whether you are in the field or in the office, we are sure that you'll find this app very useful.
Should you find any errors or bugs, please contact us at www.TheMobileEngineer.com or email the developer at david@TheMobileEngineer.com and we will immediately get to fix it.
As always, GOOD engineering judgement & experience is needed when using these types of technical applications.
You can literally obtain an optimal design in less than a minute.
FEATURES:
- Contains the latest AISC v14 Database.
- Supports both US Custom or Metric Unit systems.
- Searchable & Sortable Results page
- Works with any Yield value up to 65ksi / 450 MPa.
- Select whether or not the self-weight of each beam is to be considered.
- Define bracing @ Beam Ends, Half or Quarter of span, or fully braced.
- Solve for All, first 10 or 50 sections for a given type (in increasing weight order), saving calculation time for shape types with a large number of designations (W, HSS, 2L, etc)
- All your preferences are instantly saved, no need to re-enter a value that does not change between problems.
- Detail window reports max moment and shear, bending & allowed bending stress, shear & allowed shear stress, deflections and problem set-up summary.
- Solve for point load at mid-span or distributed load.
ASD9 based solver
The application checks for bending & shear stresses as the passing criteria. It also reports deflections, it's to the user, however, to decide whether the deflections are within acceptable limits.
Only singly or doubly symmetric shapes are considered, hence, single angles are not included in this release. Double angles (2L) sections are included BUT assumed to be under continuos contact.
Whether you are in the field or in the office, we are sure that you'll find this app very useful.
Should you find any errors or bugs, please contact us at www.TheMobileEngineer.com or email the developer at david@TheMobileEngineer.com and we will immediately get to fix it.
As always, GOOD engineering judgement & experience is needed when using these types of technical applications.
Show More
تحديث لأحدث إصدار 4.7
Last updated on 25/05/2020
الإصدارات القديمة
- Maintenance release for iOS13
Show More
Version History
4.7
25/05/2020
- Maintenance release for iOS13
4.5
14/10/2019
- Support for iOS 13
- Improve layout for both iphone and ipad
- full support for landscape orientations on ipad
- Code improvements
- Improve layout for both iphone and ipad
- full support for landscape orientations on ipad
- Code improvements
4.1
15/09/2017
64 bit support
3.0.0
09/01/2014
- iOS7 native interface
- Fixes setting of custom yield under iOS7
- New graphics
- Miscellaneous fixes & improvements
- Fixes setting of custom yield under iOS7
- New graphics
- Miscellaneous fixes & improvements
2.0.1
20/02/2013
- Fixed mislabeling in results & PDF generation when using Metric unit system.
2.0.0
29/01/2013
- New USER DEFINED load option, enter any given shear & load combination within the same span. Useful for multi-span beams or more complex loading not handled by the simpler options.
- Metric system switched from cm, m, kg, kg/cm2 to m, kN, MPA
- Mail results as PDF.
- Improved retina display support for iphone & ipad
- UI Tweaks
- minor code improvements
- Metric system switched from cm, m, kg, kg/cm2 to m, kN, MPA
- Mail results as PDF.
- Improved retina display support for iphone & ipad
- UI Tweaks
- minor code improvements
1.6.0
04/01/2013
Code maintenance and performance improvements
1.5.0
25/09/2012
- Optimization for iPhone 5's 4" screen
- New, high resolution Icon
- Updated UI
- Minimum requirement is now iOS 4.3
- New, high resolution Icon
- Updated UI
- Minimum requirement is now iOS 4.3
1.3.1
26/03/2012
- Updated product availability
(9/17/12): new update with full support for iPhone 5's 4 in screen uploaded for review today. Available soon!
(9/17/12): new update with full support for iPhone 5's 4 in screen uploaded for review today. Available soon!
1.3.0
01/02/2012
- Added option so that solver always uses conservative Cb=1 regardless of bracing conditions.
1.2.0
17/01/2012
- Universal Support!
- Fixed table dimensions for iphone version which prevented selection of PIPE sections
- Code cleanup
- Fixed table dimensions for iphone version which prevented selection of PIPE sections
- Code cleanup
1.1.0
10/12/2011
- Additional visual information on Passing Beams window. Beams with deflections larger than Span / 240 are marked yellow
- Corrected maximum shear calculation for Pipes & Round HSS shapes.
- Fixed graphical glitch on first screen
- Corrected maximum shear calculation for Pipes & Round HSS shapes.
- Fixed graphical glitch on first screen
v1.0.0
06/12/2011
Steel Beams Bulk Checker FAQ
انقر هنا لمعرفة كيفية تنزيل Steel Beams Bulk Checker في بلد أو منطقة محظورة.
تحقق من القائمة التالية لمعرفة الحد الأدنى من المتطلبات Steel Beams Bulk Checker.
iPhone
Requiere iOS 13.0 o posterior.
iPad
Requiere iPadOS 13.0 o posterior.
iPod touch
Requiere iOS 13.0 o posterior.
Steel Beams Bulk Checker هي مدعومة على اللغات Inglés