Age Rating
Harry's LapTimer Grand Prix Screenshots
About Harry's LapTimer Grand Prix
Harry's LapTimer ist die ultimative 'Killer App' für alle die ihr Fahrzeug auf Rennstrecken bewegen. LapTimer zeichnet dabei alle Arten von Sensordaten vom iPhone und externen Datenquellen auf, kombiniert sie und präsentiert sie zur Optimierung des Fahrstils. Über Zeit erhält man damit Einblicke in Mensch und Maschine von denen man vorher nicht geträumt hätte!
LapTimer ist für mehr als 1300 Rennstrecken weltweit vorbereitet. Mit den eingebauten Assistenten ist das Setup schnell erledigt, man wählt die Strecke und fährt los. LapTimer automatisiert die Zeitnahme vollständig und präsentiert die Ergebnisse als Diagramme, Listen, Charts, Video und unterstützt diverse Exportformate.
Dabei ist der Einsatzbereich nicht auf die Rennstrecke beschränkt. So kann man z. B. den Weg von zu Hause zur Arbeit als 'Strecke' definieren und Statistiken zu unterschiedlichen Routen sammeln und über Zeit optimieren.
Sie wollen Ihre gefahrenen Runden Ihren Freunden zeigen? LapTimer generiert wunderschöne InCar Videos mit vollständigem Daten Overlay, fertig um präsentiert zu werden - zum Beispiel in youtube. Auch ohne Video stehen spezielle Ansichten zur Verfügung die es einem ermöglichen gefahrene Zeiten Schritt für Schritt zu verbessern.
Mit Hilfe von 'Online Racing' kann LapTimer auch im Wettbewerb - ernsthaft oder zum Spass eingesetzt werden. LapTimer bietet pro Strecke eine Bestenliste an, weiterhin kann man seine Freunde Online auf der Strecke sehen - in Echtzeit. Runden wie Sektorzeiten können verglichen, Brems- und Beschleunigungspunkte werden transparent - man kann voneinander lernen.
LapTimer funktioniert mit dem nackten iPhone. Will man mehr und genauere Daten ist der Weg nach oben offen. Externe GPS Geräte (z. B. mit 5Hz Rate) oder OBD II Sensoren können später hinzugefügt und angeschlossen werden - Schritt für Schritt - und wie man es benötigt.
LapTimer ist in drei Editionen erhältlich: LapTimer Rookie ist die Einstiegversion mit allem was man für Zeitnahme und Data Recording benötigt. LapTimer Petrolhead ist die Version für Fortgeschrittene mit jeder Menge Video Funktionen. Zuletzt ist LapTimer Grand Prix die Version für den Profi inklusive Steuerung mehrerer Kameras gleichzeitig, Health Kit Integration, sowie ausgefeilten Analysefunktionen und professioneller Sensor-Unterstützung (bis 20 Hz).
Der Funktionsumfang hängt von der verwendeten iPhone Generation und iOS ab. Einige Funktionen werden auch erst nach dem Hinzufügen von externen Sensoren verfügbar (wie OBD II). Schauen Sie bitte auf unsere Homepage für weitere Details. Alle Editionen können per InApp Purchase nachträglich auf die höheren Versionen gebracht werden.
Es gibt eine Reihe von dedizierten LapTimern. Diese sind vergleichsweise teuer und bieten einen deutlich geringeren Funktionsumfang als Harry's LapTimer. Seien Sie schlau und holen Sie sich den LapTimer mit dem größten Funktionsumfang auf Ihr iPhone. Abgesehen vom Profibereich ist uns kein LapTimer bekannt der im Ansatz vergleichbar viele Funktionen anbietet. Unsere Ambition ist es durch kontinuierliche Weiterentwicklung stets das allerbeste Tool zu bleiben!
Bsuchen Sie http://www.gps-laptimer.de für detaillierte Beschreibungen, Fragen und Antworten, Dokumentation, Technologieartikel, Online Racing und kompatible externe Sensoren. Besuchen Sie unser Forum unter http://www.gps-laptimer-forum.de um sich an der Weiterentwicklung zu beteiligen und exzellenten Support zu erhalten.
LapTimer ist für mehr als 1300 Rennstrecken weltweit vorbereitet. Mit den eingebauten Assistenten ist das Setup schnell erledigt, man wählt die Strecke und fährt los. LapTimer automatisiert die Zeitnahme vollständig und präsentiert die Ergebnisse als Diagramme, Listen, Charts, Video und unterstützt diverse Exportformate.
Dabei ist der Einsatzbereich nicht auf die Rennstrecke beschränkt. So kann man z. B. den Weg von zu Hause zur Arbeit als 'Strecke' definieren und Statistiken zu unterschiedlichen Routen sammeln und über Zeit optimieren.
Sie wollen Ihre gefahrenen Runden Ihren Freunden zeigen? LapTimer generiert wunderschöne InCar Videos mit vollständigem Daten Overlay, fertig um präsentiert zu werden - zum Beispiel in youtube. Auch ohne Video stehen spezielle Ansichten zur Verfügung die es einem ermöglichen gefahrene Zeiten Schritt für Schritt zu verbessern.
Mit Hilfe von 'Online Racing' kann LapTimer auch im Wettbewerb - ernsthaft oder zum Spass eingesetzt werden. LapTimer bietet pro Strecke eine Bestenliste an, weiterhin kann man seine Freunde Online auf der Strecke sehen - in Echtzeit. Runden wie Sektorzeiten können verglichen, Brems- und Beschleunigungspunkte werden transparent - man kann voneinander lernen.
LapTimer funktioniert mit dem nackten iPhone. Will man mehr und genauere Daten ist der Weg nach oben offen. Externe GPS Geräte (z. B. mit 5Hz Rate) oder OBD II Sensoren können später hinzugefügt und angeschlossen werden - Schritt für Schritt - und wie man es benötigt.
LapTimer ist in drei Editionen erhältlich: LapTimer Rookie ist die Einstiegversion mit allem was man für Zeitnahme und Data Recording benötigt. LapTimer Petrolhead ist die Version für Fortgeschrittene mit jeder Menge Video Funktionen. Zuletzt ist LapTimer Grand Prix die Version für den Profi inklusive Steuerung mehrerer Kameras gleichzeitig, Health Kit Integration, sowie ausgefeilten Analysefunktionen und professioneller Sensor-Unterstützung (bis 20 Hz).
Der Funktionsumfang hängt von der verwendeten iPhone Generation und iOS ab. Einige Funktionen werden auch erst nach dem Hinzufügen von externen Sensoren verfügbar (wie OBD II). Schauen Sie bitte auf unsere Homepage für weitere Details. Alle Editionen können per InApp Purchase nachträglich auf die höheren Versionen gebracht werden.
Es gibt eine Reihe von dedizierten LapTimern. Diese sind vergleichsweise teuer und bieten einen deutlich geringeren Funktionsumfang als Harry's LapTimer. Seien Sie schlau und holen Sie sich den LapTimer mit dem größten Funktionsumfang auf Ihr iPhone. Abgesehen vom Profibereich ist uns kein LapTimer bekannt der im Ansatz vergleichbar viele Funktionen anbietet. Unsere Ambition ist es durch kontinuierliche Weiterentwicklung stets das allerbeste Tool zu bleiben!
Bsuchen Sie http://www.gps-laptimer.de für detaillierte Beschreibungen, Fragen und Antworten, Dokumentation, Technologieartikel, Online Racing und kompatible externe Sensoren. Besuchen Sie unser Forum unter http://www.gps-laptimer-forum.de um sich an der Weiterentwicklung zu beteiligen und exzellenten Support zu erhalten.
Show More
Was ist neu in der neuesten Version 24.8.2
Last updated on Jul 1, 2023
Alte Versionen
- Added support for Racebox Mini S
- Added an Expert Setting to adjust the number of minutes recent fixes are displayed in Map View
- Added an Expert Setting to adjust the number of minutes recent fixes are displayed in Map View
Show More
Version History
24.8.2
Jul 1, 2023
- Added support for Racebox Mini S
- Added an Expert Setting to adjust the number of minutes recent fixes are displayed in Map View
- Added an Expert Setting to adjust the number of minutes recent fixes are displayed in Map View
24.8.0
Apr 27, 2023
- Added full SQL export of databases
- Add support for vLinker FS OBD sensor
- Added support for Columbus P-9 Race GPS sensor
- Increased version for Racebox Mini integration
- Rechecked memory testing, added an Expert Setting to mute warnings
- Fixed a few bugs in low level data handling after stress tests
- Refactored iOS version specific code
- Worked around a crash when overlaying video with tire information
- Fixed a crash when importing .hlptrl files with tire information
- Add support for vLinker FS OBD sensor
- Added support for Columbus P-9 Race GPS sensor
- Increased version for Racebox Mini integration
- Rechecked memory testing, added an Expert Setting to mute warnings
- Fixed a few bugs in low level data handling after stress tests
- Refactored iOS version specific code
- Worked around a crash when overlaying video with tire information
- Fixed a crash when importing .hlptrl files with tire information
24.7.1
Nov 18, 2022
- Fixed crashes in System, Contact, Export
24.7
Nov 3, 2022
- Updated Alsense TPMS sensors support to v3
- Added option to enable / disable individual sensors
- Video List gets sorted by date / time
- Added support for iPhone14 screen resolutions and completed iPhone type list
- Increased minimum supported iOS version to iOS12
- Added option to enable / disable individual sensors
- Video List gets sorted by date / time
- Added support for iPhone14 screen resolutions and completed iPhone type list
- Increased minimum supported iOS version to iOS12
24.6.3
Jul 26, 2022
- Fixed 25 Hz storage rate for Racebox Mini
- Added support for the Columbus P-7 Pro GNSS
- Added support for the Columbus P-7 Pro GNSS
24.6.1
Jun 26, 2022
- Fixed a problem in Racebox Mini integration resulting in 1Hz instead of 25Hz recordings
- Fixed a few bugs in Alsense TPMS scripting
- Updated iOS device list to latest release
- Set Playback audio mode allowing video playbacks while muted
- Fixed OBD field indentation in hlptrl exports
- Fixed a few bugs in Alsense TPMS scripting
- Updated iOS device list to latest release
- Set Playback audio mode allowing video playbacks while muted
- Fixed OBD field indentation in hlptrl exports
24.6
Apr 19, 2022
- Fixed import of log files - the last and second last lap imported has been purged accidentally
- Fixed a crash that occurred when tapping image preview to show a bigger version
- Fixed switches between Fill and Fit screen layouts for videos in landscape
- Startup sound muted during night (not in 9 to 9)
- Added support for RaceboxMini GPS sensor
- Added support for OBDLink CX OBD sensor
- Added support for Wiveltracker GPS/OBD sensor
- Fixed overrun in power calculation (seen in power chart)
- Added experimental support for Alsense TPMS sensors
We had a hard time to fix the media library corruption that occurred when overlaying videos. This problem has been reported since iOS15. In case you use iOS15, make sure it is updated to 15.4.1 or higher and use this app version. In case you run into issues, please contact us.
- Fixed a crash that occurred when tapping image preview to show a bigger version
- Fixed switches between Fill and Fit screen layouts for videos in landscape
- Startup sound muted during night (not in 9 to 9)
- Added support for RaceboxMini GPS sensor
- Added support for OBDLink CX OBD sensor
- Added support for Wiveltracker GPS/OBD sensor
- Fixed overrun in power calculation (seen in power chart)
- Added experimental support for Alsense TPMS sensors
We had a hard time to fix the media library corruption that occurred when overlaying videos. This problem has been reported since iOS15. In case you use iOS15, make sure it is updated to 15.4.1 or higher and use this app version. In case you run into issues, please contact us.
24.5
Jun 22, 2021
- added support for multi-lens cams, new selection x0.5, x1.0, x2.0, x2.5 in Video Preview
- added a feature to auto-shift recordings to tracks (minimize overall gap)
- updated RaceHF Bean integration
- added AirVent / racingIOTengine option with no GPS
- several improvements and fixes for iPads (crashes, layout, data transfers)
- ampersands in vehicle names made imports fail, improved escaping in XML exports
- removed export of invalid intermediate times
- in case storage reported by iOS is too small for overlays, user gets an option to ignore and proceed
- updated iPhone/iPad name mappings in Contact mail
- added a feature to auto-shift recordings to tracks (minimize overall gap)
- updated RaceHF Bean integration
- added AirVent / racingIOTengine option with no GPS
- several improvements and fixes for iPads (crashes, layout, data transfers)
- ampersands in vehicle names made imports fail, improved escaping in XML exports
- removed export of invalid intermediate times
- in case storage reported by iOS is too small for overlays, user gets an option to ignore and proceed
- updated iPhone/iPad name mappings in Contact mail
24.0
Sep 22, 2020
This is our next major release. It is free for all existing users!
- Reworked all logging format importers (VBO, GPX, NMEA), added support for as-is imports (VBO, NMEA)
- Refactor all dialogs, fixed dead locks
- Fixed VEEPEAK OBD adapter recognition
- Fixed a bug in track set conflict resolving
- Modernized launch screen for late iOS versions
- Modernized media handling and access to videos in particular
- Modernized various user interface areas for late iOS versions
- Renamed Camera Roll to Photos
- Changed OBD gauges in video overlays to appear if any lap has OBD, not only if all have it
- Added a health check for disconnected external sensors
- Allow manual track selection in Status if either Manual Timing is enabled or Performance View is selected
- Fast speed range selection for Performance View
- Fixed delta display of temperatures when using Fahrenheit
- Fixed a crash when returning from Video Preview
- Added sector and lap time display to video overlays again
- Added setting for HERO8
- Added support for the airVentDisplay (BMW e46 m3 GNSS and engine adapter)
- Added track subtype for Water (for Jetski, motorboat, sailing competition)
- Fixed crash when restoring a database
- Updated traditional Chinese translation
- Added build number to system information
- Massive refactoring in several areas
- Reworked all logging format importers (VBO, GPX, NMEA), added support for as-is imports (VBO, NMEA)
- Refactor all dialogs, fixed dead locks
- Fixed VEEPEAK OBD adapter recognition
- Fixed a bug in track set conflict resolving
- Modernized launch screen for late iOS versions
- Modernized media handling and access to videos in particular
- Modernized various user interface areas for late iOS versions
- Renamed Camera Roll to Photos
- Changed OBD gauges in video overlays to appear if any lap has OBD, not only if all have it
- Added a health check for disconnected external sensors
- Allow manual track selection in Status if either Manual Timing is enabled or Performance View is selected
- Fast speed range selection for Performance View
- Fixed delta display of temperatures when using Fahrenheit
- Fixed a crash when returning from Video Preview
- Added sector and lap time display to video overlays again
- Added setting for HERO8
- Added support for the airVentDisplay (BMW e46 m3 GNSS and engine adapter)
- Added track subtype for Water (for Jetski, motorboat, sailing competition)
- Fixed crash when restoring a database
- Updated traditional Chinese translation
- Added build number to system information
- Massive refactoring in several areas
23.0.11
Dec 9, 2019
- Maintenance release addressing some intermittent issues
- Reworked document type declarations again, should work around issued with iOS13 and file opening
- Improved error message when import fails
- Fixed a crash that could occur on external sensor disconnects
- Fixed crash when opening files using iOS13.2
- Fixed a crash when loading an Add-on from Add-ons while on an iPad in landscape
- Reworked document type declarations again, should work around issued with iOS13 and file opening
- Improved error message when import fails
- Fixed a crash that could occur on external sensor disconnects
- Fixed crash when opening files using iOS13.2
- Fixed a crash when loading an Add-on from Add-ons while on an iPad in landscape
23.0.10
Oct 30, 2019
- Optimized Light / Dark skinning for web and help views
- Optimized sizing of iPad user interface, font sizes and gadget heights in particular
- Improved Bluetooth handling for iOS 13: LapTimer can be operated with BT disabled again
- Fixed Video Preview landscape orientation when starting it from a portrait view (Classic, Speedo, Racer's)
- Removed OBD24U sensor support
- Fixed a bug in reading NMEA from external GPS accessorties
- Improved NMEA handling to handle GPS, GLONASS, Galileo, BeiDou sentences better
- Enriched NMEA sentence display in Satellites View and Sensor Information to report on GNSSes used
- Fixed problem with missed satellites in Satellites View
- Added support for sensor configuration dialogs using scripting
- Refactored VBOX, ASL, BadElf configurators to use the new sensor configuration feature
- Code sanitizing and modernization
- Optimized sizing of iPad user interface, font sizes and gadget heights in particular
- Improved Bluetooth handling for iOS 13: LapTimer can be operated with BT disabled again
- Fixed Video Preview landscape orientation when starting it from a portrait view (Classic, Speedo, Racer's)
- Removed OBD24U sensor support
- Fixed a bug in reading NMEA from external GPS accessorties
- Improved NMEA handling to handle GPS, GLONASS, Galileo, BeiDou sentences better
- Enriched NMEA sentence display in Satellites View and Sensor Information to report on GNSSes used
- Fixed problem with missed satellites in Satellites View
- Added support for sensor configuration dialogs using scripting
- Refactored VBOX, ASL, BadElf configurators to use the new sensor configuration feature
- Code sanitizing and modernization
23.0.8
Oct 2, 2019
- Full support for iOS13 Dark Mode
- Made custom PID settings more robust
- Fixed exporting overlaid videos (truncated min/max speeds, POI labels, and missing lap / sector times)
- Updated RaceHF sensor script
- Fine tuned iPhone 11 screen layouts
- Fixed zoomed ticks size in Timer View (most models)
- Fixed selection of search categories (Kart etc)
- Updated list of iOS devices
- Several optimizations for iOS13
- Flipped sign for lateral acceleration in VBO imports and exports
- Fixed a bug in Add-on section counts
- Added a workaround for missing file associations
- Fixed battery level retrieval for BT LE sensors
- Fixed video resolution selection range for iPads
- Made custom PID settings more robust
- Fixed exporting overlaid videos (truncated min/max speeds, POI labels, and missing lap / sector times)
- Updated RaceHF sensor script
- Fine tuned iPhone 11 screen layouts
- Fixed zoomed ticks size in Timer View (most models)
- Fixed selection of search categories (Kart etc)
- Updated list of iOS devices
- Several optimizations for iOS13
- Flipped sign for lateral acceleration in VBO imports and exports
- Fixed a bug in Add-on section counts
- Added a workaround for missing file associations
- Fixed battery level retrieval for BT LE sensors
- Fixed video resolution selection range for iPads
23.0.7
Sep 19, 2019
This bugfix release is bringing back fluent real time videos! We discovered an issue for both real time video overlays and the use of Video Preview while racing lately. This problem is fixed now. You will see lag-free overlays for video with up to 120fps. :-)
23.0.6
Aug 28, 2019
Changes in v23.0.6
- Updated Compatibility List: VC601, RejsaRubberTrack, Texys, Pozyx, Nonda TPMS, APEXpro
- Allows third parties to add TPMS sensor integrations
- Added support for APEXpro sensor
- Added satellites number to GPS View for non-NMEA sensors with sat num available
- Made Dyno minimal speed (30 km/h) configurable in Expert Settings
- Added a Re-Link button to the error dialog shown for OFFLINE videos
- Improved Kiwi4 stability by adding a workaround for default protocol pre-selection (ATSPA)
- Refactoring / Modernization of several code areas
- Updated Compatibility List: VC601, RejsaRubberTrack, Texys, Pozyx, Nonda TPMS, APEXpro
- Allows third parties to add TPMS sensor integrations
- Added support for APEXpro sensor
- Added satellites number to GPS View for non-NMEA sensors with sat num available
- Made Dyno minimal speed (30 km/h) configurable in Expert Settings
- Added a Re-Link button to the error dialog shown for OFFLINE videos
- Improved Kiwi4 stability by adding a workaround for default protocol pre-selection (ATSPA)
- Refactoring / Modernization of several code areas
23.0.5
Aug 2, 2019
Changes in 23.0.4
- Optimized tracing
- Added both the current track for manual recordings, and the list of automatic track sets available to Status
- Clarified meaning of current track
Changes in 23.0.5
- Added support for Nonda ZUS TPMS
- Added support for signed distances (TPMS sensors)
- Tires View memorizes range selection
- Fixed bug in tire fix storage
- Tire pressure changes from temperature development are taken into account for warnings
- Changed GPS View to show satellite number and differential status for non-NMEA sensors if available
- Optimized tracing
- Added both the current track for manual recordings, and the list of automatic track sets available to Status
- Clarified meaning of current track
Changes in 23.0.5
- Added support for Nonda ZUS TPMS
- Added support for signed distances (TPMS sensors)
- Tires View memorizes range selection
- Fixed bug in tire fix storage
- Tire pressure changes from temperature development are taken into account for warnings
- Changed GPS View to show satellite number and differential status for non-NMEA sensors if available
23.0.3
Jun 18, 2019
- Added a backup reminder in case the latest backup is older than the last recording
- Disabled pausing and snap to road for iOS location service
- Some performance tuning on session grouping
- Fixed rotation issue reported for Lap List on iPad; fixed Add-ons and Lap List views
- Removed a bunch of now unused alerts
- Fixed switching temperature gauge and gadget in Engine View
- Disabled pausing and snap to road for iOS location service
- Some performance tuning on session grouping
- Fixed rotation issue reported for Lap List on iPad; fixed Add-ons and Lap List views
- Removed a bunch of now unused alerts
- Fixed switching temperature gauge and gadget in Engine View
23.0.1
May 30, 2019
- Improved same session detection
- Use recording date for "File created..." in VBO exports
- Added a message to Video Preview that this should not be used while driving
- Added a workaround for iPhone apps running on an iPad in compatibility mode
- Updated RaceHF sensor script
- Use recording date for "File created..." in VBO exports
- Added a message to Video Preview that this should not be used while driving
- Added a workaround for iPhone apps running on an iPad in compatibility mode
- Updated RaceHF sensor script
23.0.0
May 16, 2019
Changes in LapTimer v23:
Video / Overlay
- Added tire gadget to video overlays; support for both measured and simulated temperatures [GrandPrix]
New Functionality
- Editing of recordings at fix level
- Laps can be marked as Incomplete manually
- Recordings can be joined into one lap
- Replaced Dropbox integration by general purpose sharing of data (iOS distribute function)
- Added weather information
- Added reference lap plot to Map View
- New Tires View showing temperatures, pressures, battery, tx level, with intelligent warnings [GrandPrix]
- Customizable fuel tank empty and warning levels
- Tire temperature simulation from acceleration and vehicle properties
Improvements
- Various new Expert Settings to tweak LapTimer for your requirements
- Improved Chart coloring; added more temperatures to Temperature Chart, added new chart showing tire temperatures [GrandPrix]
- Sensor List is showing accessory types disabled
- Avg. speed calculation shows calculation source (standard or measured distance)
- Trigger detection corridor width can be specified by trigger
- More information on databases, improved recovery routines
- Modernized build environments to iOS12
- Improved sensor fusion, made it more robust for dropping connections
Sensors
- Added support for indoor positioning systems (e.g. indoor karts)
- Added support for TPMS sensors: VC601 and RejsaRubberTrack (more to come)
- General support for tire sensors with up to 16 temperatures per tire
- Included tire configuration (assign sensor or tire)
- Generalized engine sensor support to fully support non OBD systems
- Added support for VEEPEAK OBD BTLE adapters
- Added 50 Hz storage rate (experimental)
Plus dozens of smaller fixes, improvements, and refactoring
Video / Overlay
- Added tire gadget to video overlays; support for both measured and simulated temperatures [GrandPrix]
New Functionality
- Editing of recordings at fix level
- Laps can be marked as Incomplete manually
- Recordings can be joined into one lap
- Replaced Dropbox integration by general purpose sharing of data (iOS distribute function)
- Added weather information
- Added reference lap plot to Map View
- New Tires View showing temperatures, pressures, battery, tx level, with intelligent warnings [GrandPrix]
- Customizable fuel tank empty and warning levels
- Tire temperature simulation from acceleration and vehicle properties
Improvements
- Various new Expert Settings to tweak LapTimer for your requirements
- Improved Chart coloring; added more temperatures to Temperature Chart, added new chart showing tire temperatures [GrandPrix]
- Sensor List is showing accessory types disabled
- Avg. speed calculation shows calculation source (standard or measured distance)
- Trigger detection corridor width can be specified by trigger
- More information on databases, improved recovery routines
- Modernized build environments to iOS12
- Improved sensor fusion, made it more robust for dropping connections
Sensors
- Added support for indoor positioning systems (e.g. indoor karts)
- Added support for TPMS sensors: VC601 and RejsaRubberTrack (more to come)
- General support for tire sensors with up to 16 temperatures per tire
- Included tire configuration (assign sensor or tire)
- Generalized engine sensor support to fully support non OBD systems
- Added support for VEEPEAK OBD BTLE adapters
- Added 50 Hz storage rate (experimental)
Plus dozens of smaller fixes, improvements, and refactoring
22.1.4
Nov 30, 2018
Changes in v22.1.4
- Improved sync point maintenance for multi lap overlays
- Expanded usable parameter range to A .. AZ for custom PIDs
- Fixed an issue with ECU addressing
- Improved Sensor Information display for OBD adapters
- Improved message showing import results
- Improved sync point maintenance for multi lap overlays
- Expanded usable parameter range to A .. AZ for custom PIDs
- Fixed an issue with ECU addressing
- Improved Sensor Information display for OBD adapters
- Improved message showing import results
22.1.3
Nov 20, 2018
Changes:
- fixed manual recording operations including Video Preview and incomplete laps
- fixed an issue with custom PID expressions
- fixed manual recording operations including Video Preview and incomplete laps
- fixed an issue with custom PID expressions
22.1.2
Oct 24, 2018
This is a bugfix release:
- Improved reliability of lap split detection
- Improved reliability of lap split detection
22.1.1
Oct 5, 2018
This release fixes two intermittent bugs:
- triggers crossed exactly W/E or N/S can be missed
- multiple replies to OBD requests may crash the app
- triggers crossed exactly W/E or N/S can be missed
- multiple replies to OBD requests may crash the app
22.1.0
Sep 26, 2018
Changes in LapTimer v22.1.0
This is a minor update including a number of critical fixes.
- Check Data creates a System Backup before changing database
- Fixed an issue with wrong triggering of lap recordings; this lead to corrupted Lap List entries
- Fixed System.log output (attached to Contact mails)
- Added an attachment to Contact mails showing all non-private setting changes
- Fixed one of the corridor angle Expert Settings
- Improved internal speed calculations
- Improved Check Data addressing issues in September 2018 recordings
- Made Check Data less aggressive (deletion of corrupted recordings)
- Some changes for smooth iOS12 operation
- Update of libraries used
- Improved Apple Watch communication
- Allow marking recordings "Incomplete"
- Improved use of "lap" / "recording" and "track" / "group" notions
This is a minor update including a number of critical fixes.
- Check Data creates a System Backup before changing database
- Fixed an issue with wrong triggering of lap recordings; this lead to corrupted Lap List entries
- Fixed System.log output (attached to Contact mails)
- Added an attachment to Contact mails showing all non-private setting changes
- Fixed one of the corridor angle Expert Settings
- Improved internal speed calculations
- Improved Check Data addressing issues in September 2018 recordings
- Made Check Data less aggressive (deletion of corrupted recordings)
- Some changes for smooth iOS12 operation
- Update of libraries used
- Improved Apple Watch communication
- Allow marking recordings "Incomplete"
- Improved use of "lap" / "recording" and "track" / "group" notions
22.0.4
Sep 11, 2018
Version 22.0.4 is a bug fix release addressing issues reported.
Welcome to version 22 of Harry's LapTimer. This major release has a special focus on faster and broader sensor support. As a special feature, you can define the data storage rate independent from sensor update rates. As an example, even the internal GPS can give you smooth 10 Hz recordings now. A detailed list of changes is available below. Please report any issues directly to Harry@gps-laptimer.de or post on forum.gps-laptimer.de.
Sensor Handling
- Variable recording rates using splined interpolation (e.g. 5 or 10 Hz)
- Full brake pressure support
- Refactored existing code to allow flexible configuration
- Automatic bus type detection, all optimizations are done automatically
- Support for custom PIDs, formula based evaluation (experimental)
- Added support for physical ECU addressing, major speed improvement
- Improved OBD debugging support
- Further update rate improvements
- End to end sensor data queuing minimizing real time effects
- Support for extended channels: gear, odometer, brake pressure, individual
wheel speed, steering wheel angle and rate - requires scripting or
custom PIDs
- Support for ReDrive sensor
- Support for Cycling Speed and Cadence (CSC) sensors
- Disabled generic sensor configuration
- Support for VC601 TPMS sensors (experimental)
User Interface
- Lots of User Interface refinements
- Hall of Fame filtering by Group
- Further iPhoneX layout improvements
- Edmunds support removed (discontinued by Edmunds)
- Support for low rpm vehicles
- Precision wheel circumference settings
- Added Smart Bike section to Vehicle Details
Video
- Added brake pressure to video overlays
Accessories
- Update to watchOS 3.0 (no functional changes)
- Added entries for HERO6 BE and HERO 2018 [GrandPrix]
Special fixes
- Fixed "decoder busy" issue
- Avg. speed calculation uses standard configuration track length
- Full session video overlays improved
Optimizations, fixes, and minor improvements all over the place.
Welcome to version 22 of Harry's LapTimer. This major release has a special focus on faster and broader sensor support. As a special feature, you can define the data storage rate independent from sensor update rates. As an example, even the internal GPS can give you smooth 10 Hz recordings now. A detailed list of changes is available below. Please report any issues directly to Harry@gps-laptimer.de or post on forum.gps-laptimer.de.
Sensor Handling
- Variable recording rates using splined interpolation (e.g. 5 or 10 Hz)
- Full brake pressure support
- Refactored existing code to allow flexible configuration
- Automatic bus type detection, all optimizations are done automatically
- Support for custom PIDs, formula based evaluation (experimental)
- Added support for physical ECU addressing, major speed improvement
- Improved OBD debugging support
- Further update rate improvements
- End to end sensor data queuing minimizing real time effects
- Support for extended channels: gear, odometer, brake pressure, individual
wheel speed, steering wheel angle and rate - requires scripting or
custom PIDs
- Support for ReDrive sensor
- Support for Cycling Speed and Cadence (CSC) sensors
- Disabled generic sensor configuration
- Support for VC601 TPMS sensors (experimental)
User Interface
- Lots of User Interface refinements
- Hall of Fame filtering by Group
- Further iPhoneX layout improvements
- Edmunds support removed (discontinued by Edmunds)
- Support for low rpm vehicles
- Precision wheel circumference settings
- Added Smart Bike section to Vehicle Details
Video
- Added brake pressure to video overlays
Accessories
- Update to watchOS 3.0 (no functional changes)
- Added entries for HERO6 BE and HERO 2018 [GrandPrix]
Special fixes
- Fixed "decoder busy" issue
- Avg. speed calculation uses standard configuration track length
- Full session video overlays improved
Optimizations, fixes, and minor improvements all over the place.
22.0.3
Sep 7, 2018
Welcome to version 22 of Harry's LapTimer. This major release has a special focus on faster and broader sensor support. As a special feature, you can define the data storage rate independent from sensor update rates. As an example, even the internal GPS can give you smooth 10 Hz recordings now. A detailed list of changes is available below. Please report any issues directly to Harry@gps-laptimer.de or post on forum.gps-laptimer.de.
Sensor Handling
- Variable recording rates using splined interpolation (e.g. 5 or 10 Hz)
- Full brake pressure support
- Refactored existing code to allow flexible configuration
- Automatic bus type detection, all optimizations are done automatically
- Support for custom PIDs, formula based evaluation (experimental)
- Added support for physical ECU addressing, major speed improvement
- Improved OBD debugging support
- Further update rate improvements
- End to end sensor data queuing minimizing real time effects
- Support for extended channels: gear, odometer, brake pressure, individual
wheel speed, steering wheel angle and rate - requires scripting or
custom PIDs
- Support for ReDrive sensor
- Support for Cycling Speed and Cadence (CSC) sensors
- Disabled generic sensor configuration
- Support for VC601 TPMS sensors (experimental)
User Interface
- Lots of User Interface refinements
- Hall of Fame filtering by Group
- Further iPhoneX layout improvements
- Edmunds support removed (discontinued by Edmunds)
- Support for low rpm vehicles
- Precision wheel circumference settings
- Added Smart Bike section to Vehicle Details
Video
- Added brake pressure to video overlays
Accessories
- Update to watchOS 3.0 (no functional changes)
- Added entries for HERO6 BE and HERO 2018 [GrandPrix]
Special fixes
- Fixed "decoder busy" issue
- Avg. speed calculation uses standard configuration track length
- Full session video overlays improved
Optimizations, fixes, and minor improvements all over the place.
Sensor Handling
- Variable recording rates using splined interpolation (e.g. 5 or 10 Hz)
- Full brake pressure support
- Refactored existing code to allow flexible configuration
- Automatic bus type detection, all optimizations are done automatically
- Support for custom PIDs, formula based evaluation (experimental)
- Added support for physical ECU addressing, major speed improvement
- Improved OBD debugging support
- Further update rate improvements
- End to end sensor data queuing minimizing real time effects
- Support for extended channels: gear, odometer, brake pressure, individual
wheel speed, steering wheel angle and rate - requires scripting or
custom PIDs
- Support for ReDrive sensor
- Support for Cycling Speed and Cadence (CSC) sensors
- Disabled generic sensor configuration
- Support for VC601 TPMS sensors (experimental)
User Interface
- Lots of User Interface refinements
- Hall of Fame filtering by Group
- Further iPhoneX layout improvements
- Edmunds support removed (discontinued by Edmunds)
- Support for low rpm vehicles
- Precision wheel circumference settings
- Added Smart Bike section to Vehicle Details
Video
- Added brake pressure to video overlays
Accessories
- Update to watchOS 3.0 (no functional changes)
- Added entries for HERO6 BE and HERO 2018 [GrandPrix]
Special fixes
- Fixed "decoder busy" issue
- Avg. speed calculation uses standard configuration track length
- Full session video overlays improved
Optimizations, fixes, and minor improvements all over the place.
Harry's LapTimer Grand Prix Preis
Heute:
29,99 €
Am günstigsten:
29,99 €
Am teuersten:
33,99 €
Harry's LapTimer Grand Prix FAQ
Klicken Sie hier, um zu erfahren, wie Sie Harry's LapTimer Grand Prix in eingeschränkten Ländern oder Regionen herunterladen können.
Überprüfen Sie die folgende Liste, um die Mindestanforderungen von Harry's LapTimer Grand Prix zu sehen.
iPhone
Erfordert iOS 12.0 oder neuer.
iPad
Erfordert iPadOS 12.0 oder neuer.
Apple Watch
Erfordert watchOS 2.0 oder neuer.
iPod touch
Erfordert iOS 12.0 oder neuer.
Harry's LapTimer Grand Prix unterstützt Deutsch, Englisch, Französisch, Italienisch, Japanisch, Spanisch, Tradit. Chinesisch, Vereinf. Chinesisch
