E-Calc Master 2021
$13.99
2.4.2for iPhone, iPad
Age Rating
E-Calc Master 2021 Screenshots
About E-Calc Master 2021
E-Calc Master is an electrical application for calculating many common electrical problems. This app is an essential tool for all electricians and electrical engineers. Unlike other similar apps E-Calc not only calculates simple formulas but returns code results including wire sizing, conduit sizing, fusing, overload size, ground and bond size and much more based on the Canadian Electric Code. The features of this app are too long to list but here are a few of the key ones;
- All calculations are saved and can be shared or printed.
- Universal app runs on iPhone and iPad.
- Calculate any motor load and get maximum overcurrent, maximum overload, minimum wire, minimum pipe, and minimum bond wire size.
- Calculate transformer size and get FLA, pipe size, fuse and breaker size, bond size, on both primary and secondary.
- Create custom panel legends and print to scale.
- Calculate the allowable ampacity of any wire type and deration situation.
- Calculate maximum number of similar sized wires in a given pipe size.
- Calculate required bonding sizes.
- Easily calculate complicated voltage drop calculations. Get results for percentage voltage drop as well as maximum lengths of runs and wire size. Derating is also supported.
- Calculate minimum burial depths for any situation including special situations including mechanical protection, under slab, and rock encased.
- Calculate any box fill situation in mL and cubic inch.
- Calculate recommeneded torque settings for all varieties of lugs and terminations.
- Convert many common units with the built in conversion calculator.
- Includes handy diagrams for service masts, kitchen wiring and communication cabling.
- Calculate linear expansion of conduits.
- Ohm's law calculator.
- Strap spacing calculator.
- Voltage unbalance calculator.
- Find NEMA codes and specs of receptacles.
- Calculate residential single dwelling service sizes.
- All calculations are saved and can be shared or printed.
- Universal app runs on iPhone and iPad.
- Calculate any motor load and get maximum overcurrent, maximum overload, minimum wire, minimum pipe, and minimum bond wire size.
- Calculate transformer size and get FLA, pipe size, fuse and breaker size, bond size, on both primary and secondary.
- Create custom panel legends and print to scale.
- Calculate the allowable ampacity of any wire type and deration situation.
- Calculate maximum number of similar sized wires in a given pipe size.
- Calculate required bonding sizes.
- Easily calculate complicated voltage drop calculations. Get results for percentage voltage drop as well as maximum lengths of runs and wire size. Derating is also supported.
- Calculate minimum burial depths for any situation including special situations including mechanical protection, under slab, and rock encased.
- Calculate any box fill situation in mL and cubic inch.
- Calculate recommeneded torque settings for all varieties of lugs and terminations.
- Convert many common units with the built in conversion calculator.
- Includes handy diagrams for service masts, kitchen wiring and communication cabling.
- Calculate linear expansion of conduits.
- Ohm's law calculator.
- Strap spacing calculator.
- Voltage unbalance calculator.
- Find NEMA codes and specs of receptacles.
- Calculate residential single dwelling service sizes.
Show More
What's New in the Latest Version 2.4.2
Last updated on Mar 3, 2024
Old Versions
- Added spacing graph to spacing module.
- Added cumulative measurements to spacing module.
- Added cumulative measurements to spacing module.
Show More
Version History
2.4.2
Mar 3, 2024
- Added spacing graph to spacing module.
- Added cumulative measurements to spacing module.
- Added cumulative measurements to spacing module.
2.4.1
Nov 24, 2023
◎ Fixed issue for number entry over 10000.
◎ Fixed material search issue.
◎ Revamped dark mode for calculator.
◎ Revamped colour picker for panel circuit edit.
◎ Fixed material search issue.
◎ Revamped dark mode for calculator.
◎ Revamped colour picker for panel circuit edit.
2.4.0
Sep 30, 2023
- iOS 17 support added.
- Material searches exclude items with no results.
- Material searches exclude items with no results.
2.3.11
Jul 30, 2023
◎ Added formula reference from voltage drop menu.
2.3.10
Jun 10, 2023
- Fixed issue with panels over running maximum circuit count.
- Fixed issue causing zero values to be ignored in service module.
- Fixed issue causing zero values to be ignored in service module.
2.3.9
Mar 1, 2023
◎ Panel circuit editting now includes background colour.
◎ Panel module now has a select opposite button.
◎ Panel module can now share on Mac.
◎ Fixed panel issue not printing ratings properly.
◎ Added orange, yellow and brown colours to panel module.
◎ Fixed issue with iPad in portrait not showing menus.
◎ Panel module now has a select opposite button.
◎ Panel module can now share on Mac.
◎ Fixed panel issue not printing ratings properly.
◎ Added orange, yellow and brown colours to panel module.
◎ Fixed issue with iPad in portrait not showing menus.
2.3.7
Feb 20, 2023
◎ Panel search now searches for individual circuits.
◎ Fixed bug causing new items to not appear on fresh app install.
◎ Job's without job numbers will give a warning.
◎ Auto-correct removed from module lists.
◎ Fixed bug causing new items to not appear on fresh app install.
◎ Job's without job numbers will give a warning.
◎ Auto-correct removed from module lists.
2.3.6
Feb 17, 2023
- Fixed panelboard section sorting issue.
2.3.5
Feb 16, 2023
- Fixed issue causing navigation stack to reset and back out.
2.3.4
Feb 14, 2023
◎ Panel location can be entered now.
◎ Panels are now listed and organized by location.
◎ Panel circuit entry revamped.
◎ Panel sharing bugs fixed.
◎ Jobs organized into sections now.
◎ Fixed bug on pull up lists not displaying.
◎ Panels are now listed and organized by location.
◎ Panel circuit entry revamped.
◎ Panel sharing bugs fixed.
◎ Jobs organized into sections now.
◎ Fixed bug on pull up lists not displaying.
2.3.3
Feb 13, 2023
◎ Panel location can be entered now.
◎ Panels are now listed and organized by location.
◎ Panel circuit entry revamped.
◎ Panel sharing bugs fixed.
◎ Panels are now listed and organized by location.
◎ Panel circuit entry revamped.
◎ Panel sharing bugs fixed.
2.3.2
Feb 9, 2023
Fixed issue causing panel module to handle multi-gang breakers improperly.
2.3.1
Feb 3, 2023
- Fixed issue causing Torque and Conversions to save in wrong location.
2.3.0
Jan 20, 2023
◎ Parallel run warnings fixed.
◎ Fixed pinned and unpinned jobs not sorting properly.
◎ Fixed saving issue with panelboard module.
◎ Fixed issues with iPad in landscape mode.
◎ Added search bar to some modules.
◎ Added pin capability to some modules.
◎ Added new spacing module.
◎ Fixed pinned and unpinned jobs not sorting properly.
◎ Fixed saving issue with panelboard module.
◎ Fixed issues with iPad in landscape mode.
◎ Added search bar to some modules.
◎ Added pin capability to some modules.
◎ Added new spacing module.
2.2.11
Nov 1, 2022
- Fixed issue with parallel run warnings.
- Fixed issue with unpinned jobs not sorting correctly.
- Fixed issue with unpinned jobs not sorting correctly.
2.2.10
Oct 11, 2022
◎ Added iOS 16 compatibility.
◎ Added detail view to pipe fill results.
◎ Select jobs now without viewing detail view, swipe left on job.
◎ Pin jobs so they stay on top.
◎ Job list shows job number of all jobs.
◎ Added lock box code to job details.
◎ Fixed too-large font sizing in calculator.
◎ Main screen contact button now presents options.
◎ Job name can now be changed.
◎ Text entry will now select all text when selected.
◎ Added detail view to pipe fill results.
◎ Select jobs now without viewing detail view, swipe left on job.
◎ Pin jobs so they stay on top.
◎ Job list shows job number of all jobs.
◎ Added lock box code to job details.
◎ Fixed too-large font sizing in calculator.
◎ Main screen contact button now presents options.
◎ Job name can now be changed.
◎ Text entry will now select all text when selected.
2.2.9
Jun 12, 2022
◎ added search to materials list
◎ added edit ability to individual materials
◎ added search to main menu
◎ added info to calculation lists
◎ added calculator shortcut to menu toolbar
◎ added nema enclosure ratings module (try it by typing nema in search bar)
◎ added edit ability to individual materials
◎ added search to main menu
◎ added info to calculation lists
◎ added calculator shortcut to menu toolbar
◎ added nema enclosure ratings module (try it by typing nema in search bar)
2.2.8
Jun 9, 2022
- Material lists can now be searched.
- Material list items can now be editted.
- Material list items can now be editted.
2.2.7
Apr 10, 2022
- Fixed issue with transformer wire sizing using older code.
2.2.6
Apr 8, 2022
- Fixed issue causing core data (saved data) to vanish.
2.2.5
Apr 5, 2022
- Added warning messages.
2.2.4
Apr 4, 2022
- Added solid wire types to pipe fill.
2.2.3
Mar 27, 2022
- Fixed share button in material list.
- Fixed add button in material list to avoid blank entries.
- Fixed add button in material list to avoid blank entries.
2.2.2
Mar 19, 2022
- Updated support for iOS 15.4.
- Added material list module.
- Added material list module.
2.2.0
Feb 14, 2022
- Updated save data to support cross device support.
E-Calc Master 2021 FAQ
Click here to learn how to download E-Calc Master 2021 in restricted country or region.
Check the following list to see the minimum requirements of E-Calc Master 2021.
iPhone
Requires iOS 17.2 or later.
iPad
Requires iPadOS 17.2 or later.
E-Calc Master 2021 supports English