tedee
Smarten up your home
Gratuit
1.195.0for iPhone, Apple Watch and more
9.5
108 Ratings
TEDEE SP. Z O.O.
Developer
84,5 Mo
Size
May 7, 2024
Update Date
Lifestyle
Category
4+
Age Rating
Age Rating
tedee Captures d'écran
About tedee
Combien de fois vous êtes-vous demandé si vous aviez bien fermé votre porte à clé ? Combien de fois avez-vous dû récupérer vos clés dans votre poche alors que vous aviez les mains chargées de sacs de courses ? Avec la serrure intelligente tedee, vous pouvez oublier ces problèmes. L’application verrouillera la porte lorsque vous sortirez et la déverrouillera automatiquement à votre retour.
tedee est bien plus qu’une clé :
• Déverrouillez et verrouillez votre porte de n’importe où grâce à votre smartphone et au pont tedee
• Partagez l’accès à la serrure avec votre famille et vos amis
• Profitez de la fonction de déverrouillage automatique : la porte peut être automatiquement déverrouillée lorsque vous rentrez chez vous
• Ne vous inquiétez plus d’avoir oublié de verrouiller votre porte : l’application détectera si la porte est déverrouillée et la verrouillera pour vous
• Consultez l’historique à tout moment sur votre smartphone
• Recevez des notifications en temps réel lorsqu’une personne déverrouille la porte en utilisant l’application ou une clé traditionnelle
• Enfin, elle est élégante !
******************
Pourquoi tedee ?
Confort
Contrôlez votre porte avec un smartphone… où que vous soyez. Vous attendez de la visite ? Partagez l’accès ou déverrouillez la porte à distance. Vos mains sont chargées de sacs de courses ? La serrure vous laissera entrer… sans contact.
Efficacité
Pas besoin d’acheter des piles ou d’en remplacer ! Grâce à sa consommation très faible en énergie et à une batterie puissante rechargeable, vous pouvez utiliser la serrure pendant des mois… et recharger la batterie en l’espace d’une nuit.
Conception
La serrure est attrayante. Fini les appareils en forme de briques ! Profitez de sa conception élégante qui conviendra à votre appartement et à votre bureau. Elle est petite, mais puissante.
Solide cryptographie
La communication avec la serrure tedee se fait au moyen du dernier protocole TSL 1.3 avec une clé de sécurité de 256 bits. Les seules personnes qui pourront accéder à la serrure seront les personnes de votre choix.
Historique des événements
L’historique vous donne les informations détaillées de tous les événements tels que la recharge ou encore le verrouillage et le déverrouillage (à la fois via l’application ou une clé traditionnelle).
Verrouillage automatique
La serrure tedee détecte si la serrure mécanique se trouve dans une position semi-verrouillée et peut compléter le verrouillage automatiquement. Vous pouvez également la maintenir verrouillée et la serrure s’en chargera après un temps prédéterminé.
******************
Twitter: https://twitter.com/tedee_smartlock
Des questions ? Des suggestions ? Nous serons ravis de les lire ! Contactez-nous à support@tedee.com ou visitez www.tedee.com
tedee est bien plus qu’une clé :
• Déverrouillez et verrouillez votre porte de n’importe où grâce à votre smartphone et au pont tedee
• Partagez l’accès à la serrure avec votre famille et vos amis
• Profitez de la fonction de déverrouillage automatique : la porte peut être automatiquement déverrouillée lorsque vous rentrez chez vous
• Ne vous inquiétez plus d’avoir oublié de verrouiller votre porte : l’application détectera si la porte est déverrouillée et la verrouillera pour vous
• Consultez l’historique à tout moment sur votre smartphone
• Recevez des notifications en temps réel lorsqu’une personne déverrouille la porte en utilisant l’application ou une clé traditionnelle
• Enfin, elle est élégante !
******************
Pourquoi tedee ?
Confort
Contrôlez votre porte avec un smartphone… où que vous soyez. Vous attendez de la visite ? Partagez l’accès ou déverrouillez la porte à distance. Vos mains sont chargées de sacs de courses ? La serrure vous laissera entrer… sans contact.
Efficacité
Pas besoin d’acheter des piles ou d’en remplacer ! Grâce à sa consommation très faible en énergie et à une batterie puissante rechargeable, vous pouvez utiliser la serrure pendant des mois… et recharger la batterie en l’espace d’une nuit.
Conception
La serrure est attrayante. Fini les appareils en forme de briques ! Profitez de sa conception élégante qui conviendra à votre appartement et à votre bureau. Elle est petite, mais puissante.
Solide cryptographie
La communication avec la serrure tedee se fait au moyen du dernier protocole TSL 1.3 avec une clé de sécurité de 256 bits. Les seules personnes qui pourront accéder à la serrure seront les personnes de votre choix.
Historique des événements
L’historique vous donne les informations détaillées de tous les événements tels que la recharge ou encore le verrouillage et le déverrouillage (à la fois via l’application ou une clé traditionnelle).
Verrouillage automatique
La serrure tedee détecte si la serrure mécanique se trouve dans une position semi-verrouillée et peut compléter le verrouillage automatiquement. Vous pouvez également la maintenir verrouillée et la serrure s’en chargera après un temps prédéterminé.
******************
Twitter: https://twitter.com/tedee_smartlock
Des questions ? Des suggestions ? Nous serons ravis de les lire ! Contactez-nous à support@tedee.com ou visitez www.tedee.com
Show More
Quoi de neuf dans la dernière version 1.195.0
Last updated on May 7, 2024
Vieilles Versions
Fixes:
- Fixed the issue preventing the app from launching when FaceID/TouchID was enabled
- Fixed the issue related to displaying icons in Today's View widgets.
- Addressed minor issues with Auto Unlock functionality.
- Fixed the issue where the home screen was not updating after adding a second device.
- Corrected the issue with clearing the PIN during the addition of a Keypad.
- Resolved the issue where the Nearby Access widget failed to connect to the lock when only one was on the account.
- Fixed the issue preventing the app from launching when FaceID/TouchID was enabled
- Fixed the issue related to displaying icons in Today's View widgets.
- Addressed minor issues with Auto Unlock functionality.
- Fixed the issue where the home screen was not updating after adding a second device.
- Corrected the issue with clearing the PIN during the addition of a Keypad.
- Resolved the issue where the Nearby Access widget failed to connect to the lock when only one was on the account.
Show More
Version History
1.195.0
May 7, 2024
Fixes:
- Fixed the issue preventing the app from launching when FaceID/TouchID was enabled
- Fixed the issue related to displaying icons in Today's View widgets.
- Addressed minor issues with Auto Unlock functionality.
- Fixed the issue where the home screen was not updating after adding a second device.
- Corrected the issue with clearing the PIN during the addition of a Keypad.
- Resolved the issue where the Nearby Access widget failed to connect to the lock when only one was on the account.
- Fixed the issue preventing the app from launching when FaceID/TouchID was enabled
- Fixed the issue related to displaying icons in Today's View widgets.
- Addressed minor issues with Auto Unlock functionality.
- Fixed the issue where the home screen was not updating after adding a second device.
- Corrected the issue with clearing the PIN during the addition of a Keypad.
- Resolved the issue where the Nearby Access widget failed to connect to the lock when only one was on the account.
1.194.1
Apr 18, 2024
Improve app stability
1.194.0
Apr 16, 2024
Fix:
- Improved handling of false geo-location events in Auto-unlock.
- Fixed issue where users could be unable to update the tedee GO lock firmware.
- Improved handling of "Bluetooth only" mode when there is an ongoing incident.
- Fixed incorrect error alert in keypad addition process.
More details http://bit.ly/tedee-release-notes
- Improved handling of false geo-location events in Auto-unlock.
- Fixed issue where users could be unable to update the tedee GO lock firmware.
- Improved handling of "Bluetooth only" mode when there is an ongoing incident.
- Fixed incorrect error alert in keypad addition process.
More details http://bit.ly/tedee-release-notes
1.193.0
Apr 3, 2024
New:
- After the Daylight Saving Time switch, access share certificates will be re-downloaded to include updated time restrictions.
- We have improved the logic to update certificates when access shares are updated.
- We have added a Nearby Access Widget that you can add to your home screen. This widget will enable you to unlock the nearest lock via BLE when you are nearby.
Fixed:
- We have fixed an issue where device filters were not cleared after switching accounts.
- We have fixed an issue where the app was not always switching properly to local operations when Flight Mode was enabled on your iPhone.
- We have fixed a crash on the share access user selection page.
- We have fixed some issues with Auto Unlock.
- After the Daylight Saving Time switch, access share certificates will be re-downloaded to include updated time restrictions.
- We have improved the logic to update certificates when access shares are updated.
- We have added a Nearby Access Widget that you can add to your home screen. This widget will enable you to unlock the nearest lock via BLE when you are nearby.
Fixed:
- We have fixed an issue where device filters were not cleared after switching accounts.
- We have fixed an issue where the app was not always switching properly to local operations when Flight Mode was enabled on your iPhone.
- We have fixed a crash on the share access user selection page.
- We have fixed some issues with Auto Unlock.
1.192.1
Mar 25, 2024
This release comprises various improvements and fixes.
1.192.0
Mar 19, 2024
New:
- New "force unlock" activity log for the keypad
Fix:
- Issue with header for empty known users list while sharing the device
More details http://bit.ly/tedee-release-notes
- New "force unlock" activity log for the keypad
Fix:
- Issue with header for empty known users list while sharing the device
More details http://bit.ly/tedee-release-notes
1.191.0
Mar 4, 2024
This release comprises various improvements and fixes.
1.190.0
Feb 20, 2024
New:
- Added force-unlock activity log
- Display serial number during the device addition process
- Included instructions on how to restore calibration for Tedee GO after replacing the batteries
Fix:
- Improved auto-unlock reliability when the bridge iBeacon is detected before the entering range event is detected
- Fixed swipe to go back gesture
- Cancelling the device adding process now clears previously highlighted devices
- Fixed Activity Logs page bottom space for iPhones with TouchID
- Fixed auto-unlock settings switch when the user is redirected to the Settings app
More details http://bit.ly/tedee-release-notes
- Added force-unlock activity log
- Display serial number during the device addition process
- Included instructions on how to restore calibration for Tedee GO after replacing the batteries
Fix:
- Improved auto-unlock reliability when the bridge iBeacon is detected before the entering range event is detected
- Fixed swipe to go back gesture
- Cancelling the device adding process now clears previously highlighted devices
- Fixed Activity Logs page bottom space for iPhones with TouchID
- Fixed auto-unlock settings switch when the user is redirected to the Settings app
More details http://bit.ly/tedee-release-notes
1.189.0
Feb 7, 2024
New:
- Bridge API is now available for all users
- Improved device adding process
- Keypad can now be added without the need for pairing with the lock
- Added device filtering options by Name, Favorites, and Organization (for Preview Testers)
- Filters settings are saved between app launches (for Preview Testers)
- Added a feature to scroll to the top of the devices list with a single button tap when there are many devices on the user's account
Fixes:
- Fixed issue with app unresponsiveness when Tedee services were not available
- Bridge API is now available for all users
- Improved device adding process
- Keypad can now be added without the need for pairing with the lock
- Added device filtering options by Name, Favorites, and Organization (for Preview Testers)
- Filters settings are saved between app launches (for Preview Testers)
- Added a feature to scroll to the top of the devices list with a single button tap when there are many devices on the user's account
Fixes:
- Fixed issue with app unresponsiveness when Tedee services were not available
1.188.0
Jan 23, 2024
New:
- Screen will not be dimmed during the adding process
- Possibility to add another device without leaving adding process
- When bridge cannot connect to Wi-Fi during adding process, proper error will be presented instead of infinite loading
- If the keypad requires a factory reset, instructions will not be hidden when batteries are removed from the keypad
- New animation between screens in the adding process
- The progress bar in the adding process has been adjusted to better indicate the length of the steps
- QR Code validation for the QR code scanner
- Various improvements for the adding process
Fix:
- Fixed auto-focus issue for QR code scanner
- Fixed default behavior of pull spring for the "unlock" command in the Shortcuts App when the "Pull" option is not set up
More details http://bit.ly/tedee-release-notes
- Screen will not be dimmed during the adding process
- Possibility to add another device without leaving adding process
- When bridge cannot connect to Wi-Fi during adding process, proper error will be presented instead of infinite loading
- If the keypad requires a factory reset, instructions will not be hidden when batteries are removed from the keypad
- New animation between screens in the adding process
- The progress bar in the adding process has been adjusted to better indicate the length of the steps
- QR Code validation for the QR code scanner
- Various improvements for the adding process
Fix:
- Fixed auto-focus issue for QR code scanner
- Fixed default behavior of pull spring for the "unlock" command in the Shortcuts App when the "Pull" option is not set up
More details http://bit.ly/tedee-release-notes
1.187.0
Jan 8, 2024
New:
- User will receive a notification to return to the app and complete the updating process if they leave the app during the device update.
- When the device is updating, screen dimming is temporarily disabled until the process is finished.
- The minimum watchOS version has been changed to watchOS 9.
- When adding a bridge, the user can now set up basic configuration before completing the process.
- When adding a keypad, the user can now set up basic configuration before completing the process.
- After adding a device, it is now highlighted on the device list until the user navigates to any device details screen. If there are more devices than fit the screen, the list is automatically scrolled to this new device.
- During the device addition process, progress is now displayed.
Fixed:
- Issue where it was not possible to update the tedee GO during adding the device or from settings.
- Issue where the lock required a factory reset when it was not needed.
- Issue where some steps were missing when adding the first lock to the app.
- User will receive a notification to return to the app and complete the updating process if they leave the app during the device update.
- When the device is updating, screen dimming is temporarily disabled until the process is finished.
- The minimum watchOS version has been changed to watchOS 9.
- When adding a bridge, the user can now set up basic configuration before completing the process.
- When adding a keypad, the user can now set up basic configuration before completing the process.
- After adding a device, it is now highlighted on the device list until the user navigates to any device details screen. If there are more devices than fit the screen, the list is automatically scrolled to this new device.
- During the device addition process, progress is now displayed.
Fixed:
- Issue where it was not possible to update the tedee GO during adding the device or from settings.
- Issue where the lock required a factory reset when it was not needed.
- Issue where some steps were missing when adding the first lock to the app.
1.186.1
Dec 15, 2023
Fixed:
- Issue where update of tedee GO was sometimes failing
- Issue where update of tedee GO was sometimes failing
1.186.0
Dec 12, 2023
New:
- Added possibility to configure pull spring behavior for Auto-unlock
- Added possibility to configure pull spring behavior for action widgets
- Added possibility to configure pull spring behavior for Shortcuts App
Fix:
- Resolved UI issues when users navigate back from the gate settings page to the gate details page
- Enhanced auto-unlock stability for Tedee GO
- Fixed the issue where Lock PIN could disappear from the app
- Fixed the problem where the bridge could be continuously displayed as updating
- Improved QR code scanning
More details http://bit.ly/tedee-release-notes
- Added possibility to configure pull spring behavior for Auto-unlock
- Added possibility to configure pull spring behavior for action widgets
- Added possibility to configure pull spring behavior for Shortcuts App
Fix:
- Resolved UI issues when users navigate back from the gate settings page to the gate details page
- Enhanced auto-unlock stability for Tedee GO
- Fixed the issue where Lock PIN could disappear from the app
- Fixed the problem where the bridge could be continuously displayed as updating
- Improved QR code scanning
More details http://bit.ly/tedee-release-notes
1.185.1
Nov 30, 2023
New:
- Multiple lock Auto-unlock zones are now available for all users.
- Improvements in the Activity Logs page are now available for all users.
- Bridge API configuration can now be reset to defaults, and Bridge API can be turned off without losing its configuration.
- Improvements in handling situations when lock state updates are delayed. Users can now switch to Bluetooth to retry operations or get the actual lock state.
- Bluetooth-only mode has been moved to the general settings page, and it is now enabled for all locks at once. During ongoing incidents when remote operations are affected, Bluetooth-only mode is enabled automatically until the incident is resolved.
Fixed:
- We have fixed the sorting of the list of known users for access sharing.
- We have fixed animations when showing the lock after waking up the application with the "Lock" option enabled in the Home Screen view.
- We have fixed setting weekdays during access sharing for GMT-x time zones.
- We have fixed the issue where some Activity Logs were not loaded when the user scrolled through them too fast.
- We have fixed the background issue with the ongoing update indicator.
- Multiple lock Auto-unlock zones are now available for all users.
- Improvements in the Activity Logs page are now available for all users.
- Bridge API configuration can now be reset to defaults, and Bridge API can be turned off without losing its configuration.
- Improvements in handling situations when lock state updates are delayed. Users can now switch to Bluetooth to retry operations or get the actual lock state.
- Bluetooth-only mode has been moved to the general settings page, and it is now enabled for all locks at once. During ongoing incidents when remote operations are affected, Bluetooth-only mode is enabled automatically until the incident is resolved.
Fixed:
- We have fixed the sorting of the list of known users for access sharing.
- We have fixed animations when showing the lock after waking up the application with the "Lock" option enabled in the Home Screen view.
- We have fixed setting weekdays during access sharing for GMT-x time zones.
- We have fixed the issue where some Activity Logs were not loaded when the user scrolled through them too fast.
- We have fixed the background issue with the ongoing update indicator.
1.185.0
Nov 28, 2023
New:
- Multiple lock Auto-unlock zones are now available for all users.
- Improvements in the Activity Logs page are now available for all users.
- Bridge API configuration can now be reset to defaults, and Bridge API can be turned off without losing its configuration.
- Improvements in handling situations when lock state updates are delayed. Users can now switch to Bluetooth to retry operations or get the actual lock state.
- Bluetooth-only mode has been moved to the general settings page, and it is now enabled for all locks at once. During ongoing incidents when remote operations are affected, Bluetooth-only mode is enabled automatically until the incident is resolved.
Fixed:
- We have fixed the sorting of the list of known users for access sharing.
- We have fixed animations when showing the lock after waking up the application with the "Lock" option enabled in the Home Screen view.
- We have fixed setting weekdays during access sharing for GMT-x time zones.
- We have fixed the issue where some Activity Logs were not loaded when the user scrolled through them too fast.
- We have fixed the background issue with the ongoing update indicator.
- Multiple lock Auto-unlock zones are now available for all users.
- Improvements in the Activity Logs page are now available for all users.
- Bridge API configuration can now be reset to defaults, and Bridge API can be turned off without losing its configuration.
- Improvements in handling situations when lock state updates are delayed. Users can now switch to Bluetooth to retry operations or get the actual lock state.
- Bluetooth-only mode has been moved to the general settings page, and it is now enabled for all locks at once. During ongoing incidents when remote operations are affected, Bluetooth-only mode is enabled automatically until the incident is resolved.
Fixed:
- We have fixed the sorting of the list of known users for access sharing.
- We have fixed animations when showing the lock after waking up the application with the "Lock" option enabled in the Home Screen view.
- We have fixed setting weekdays during access sharing for GMT-x time zones.
- We have fixed the issue where some Activity Logs were not loaded when the user scrolled through them too fast.
- We have fixed the background issue with the ongoing update indicator.
1.184.0
Nov 14, 2023
New:
- Improved designs of My Devices screen, with a new way of presenting disconnected devices
- Preview Feature: Bridge API that allows operating the lock from the local network
Fix:
- Issue with showing AU timeout notification after AU was cancelled by another lock
- Position of the favorite icon on the lock details page
More details http://bit.ly/tedee-release-notes
- Improved designs of My Devices screen, with a new way of presenting disconnected devices
- Preview Feature: Bridge API that allows operating the lock from the local network
Fix:
- Issue with showing AU timeout notification after AU was cancelled by another lock
- Position of the favorite icon on the lock details page
More details http://bit.ly/tedee-release-notes
1.183.0
Oct 31, 2023
- Smart startup is now clearly described
- New home screen option "Lock" will display first lock details when you open the app.
Fixes:
- Lock details screen elements were displayed improperly.
- Added the missing complication icon for Apple Watch Ultra.
- Log files size will be now smaller.
- New home screen option "Lock" will display first lock details when you open the app.
Fixes:
- Lock details screen elements were displayed improperly.
- Added the missing complication icon for Apple Watch Ultra.
- Log files size will be now smaller.
1.182.0
Oct 17, 2023
New:
- Enhancements to the lock activity logs screen.
- Reduced the waiting time required to unlock or lock doors from Apple Watch.
- Improved app performance.
- Changed the presentation of the nearest lock after app inactivity. Now it will be presented only when the user enters the Range-Out zone.
Fixed:
- Reduced the time required to connect the bridge to Tedee services during the adding process.
- Fixed the keypad pairing screen when no devices were detected.
- Resolved the issue where the wrong access time was presented when the device had no permission.
- Fixed the devices widget, which had a black background or was not able to load.
- Corrected the presentation of long lock names on the lock details screen.
- Enhancements to the lock activity logs screen.
- Reduced the waiting time required to unlock or lock doors from Apple Watch.
- Improved app performance.
- Changed the presentation of the nearest lock after app inactivity. Now it will be presented only when the user enters the Range-Out zone.
Fixed:
- Reduced the time required to connect the bridge to Tedee services during the adding process.
- Fixed the keypad pairing screen when no devices were detected.
- Resolved the issue where the wrong access time was presented when the device had no permission.
- Fixed the devices widget, which had a black background or was not able to load.
- Corrected the presentation of long lock names on the lock details screen.
1.181.0
Oct 3, 2023
New:
- Preview feature: Locks with Auto Unlock that are near each other will share a common set of Range-In and Range-Out zones.
- Preview feature: Successful Auto Unlock can cancel other pending AU for locks that are in same Range-In zone.
- App will automatically open lock details of the nearest lock, based on Auto Unlock location settings.
- Improved calibration process via bridge.
- Improved pull spring calibration via bridge.
Fix:
- Issue with re-adding keypad.
- Issue with accessing share settings of the lock without permissions.
More details http://bit.ly/tedee-release-notes
- Preview feature: Locks with Auto Unlock that are near each other will share a common set of Range-In and Range-Out zones.
- Preview feature: Successful Auto Unlock can cancel other pending AU for locks that are in same Range-In zone.
- App will automatically open lock details of the nearest lock, based on Auto Unlock location settings.
- Improved calibration process via bridge.
- Improved pull spring calibration via bridge.
Fix:
- Issue with re-adding keypad.
- Issue with accessing share settings of the lock without permissions.
More details http://bit.ly/tedee-release-notes
1.180.0
Sep 19, 2023
New:
- Support for iOS 17
- Door lock devices on "My devices" page show lock status text instead of "connected" text
- The application respects system font size set up in iOS Accessibility settings
Fix:
- Fixed issue with a missing icon on Apple Watch
- Fixed an issue that didn't update the gate button text in some cases
- Fixed an issue that made one of the popup screens on lock details impossible to close
More details http://bit.ly/tedee-release-notes
- Support for iOS 17
- Door lock devices on "My devices" page show lock status text instead of "connected" text
- The application respects system font size set up in iOS Accessibility settings
Fix:
- Fixed issue with a missing icon on Apple Watch
- Fixed an issue that didn't update the gate button text in some cases
- Fixed an issue that made one of the popup screens on lock details impossible to close
More details http://bit.ly/tedee-release-notes
1.179.0
Sep 5, 2023
- We have further improved app accessibility. It is now possible to operate locks and gates from the "My devices" view and utilize widgets in the "Today's" view.
- The "Lock details" view now informs the user if "Hold to unlock" is required to open the selected lock.
- We have enhanced the contrast and color scheme throughout the entire app.
- The "Lock details" view now informs the user if "Hold to unlock" is required to open the selected lock.
- We have enhanced the contrast and color scheme throughout the entire app.
1.178.1
Aug 24, 2023
Fix:
- issue with time restricted device share
- issue with time restricted device share
1.178.0
Aug 21, 2023
New:
- Continued enhancements for app accessibility
- Implementation of warnings for automatic hold to unlock when one of the locks is not set up properly for the hold-to-unlock feature
More details http://bit.ly/tedee-release-notes
- Continued enhancements for app accessibility
- Implementation of warnings for automatic hold to unlock when one of the locks is not set up properly for the hold-to-unlock feature
More details http://bit.ly/tedee-release-notes
1.177.0
Aug 9, 2023
- We have improved the app's operability with VoiceOver to make it more accessible for blind users or those with vision disabilities.
Fixed:
- When calibration via the bridge fails for some reason, we now suggest using a Bluetooth connection to calibrate the lock.
Fixed:
- When calibration via the bridge fails for some reason, we now suggest using a Bluetooth connection to calibrate the lock.
1.176.0
Jul 24, 2023
New:
- We've added a battery level indicator for the tedee GO lock: high/medium/low.
Fix:
- Fixed issue that could cause the selected lock to change on the lock details page without user interaction.
- Fixed issue that could fail the first attempt of the calibration process after replacing batteries in the tedee GO lock.
- Resolved a performance issue.
More details http://bit.ly/tedee-release-notes
- We've added a battery level indicator for the tedee GO lock: high/medium/low.
Fix:
- Fixed issue that could cause the selected lock to change on the lock details page without user interaction.
- Fixed issue that could fail the first attempt of the calibration process after replacing batteries in the tedee GO lock.
- Resolved a performance issue.
More details http://bit.ly/tedee-release-notes
tedee FAQ
Cliquez ici pour savoir comment télécharger tedee dans un pays ou une région restreints.
Consultez la liste suivante pour voir les exigences minimales de tedee.
iPhone
Nécessite iOS 14.0 ou version ultérieure.
Apple Watch
Nécessite watchOS 9.0 ou version ultérieure.
iPod touch
Nécessite iOS 14.0 ou version ultérieure.
tedee prend en charge Français, Allemand, Anglais, Danois, Espagnol, Estonien, Italien, Letton, Lituanien, Néerlandais, Polonais, Portugais, Suédois, Ukrainien
Vidéos connexes
Latest introduction video of tedee on iPhone
