RPM Stroboscope
무료Offers In-App Purchases
1.3.1for iPhone, iPad and more
Age Rating
RPM Stroboscope 스크린 샷
About RPM Stroboscope
-General
RPM Stroboscope is a simple stroboscope app that aids in determining the speed of rotating objects or the frequency of vibrating objects.
-Function
There are two modes that can be used, this is indicated by the label above the text field. When the label displays RPM, the value in the text field below displays the value in revolutions per second and the light flashes corresponding to that value. When shining the flashing light at a shaft that is spinning, it will appear to be stationary if the speed is the same as the value indicated.
Similarly, when in hertz mode the label will display Hz instead of RPM. In this case the value in the text field is converted to Hz and the light flashes corresponding to this value.
To switch between modes simply tap on the label. When in either mode, if you want to verify shaft speed or vibration frequency, you can tap on the text field and enter the value you want to verify.
If the speed or frequency is unknown, you can use the plus and minus buttons on either side of the text field to increment the value in order to find the speed or frequency. Long pressing on the plus or minus buttons will increment the value by 10 when in RPM mode and by 2 when in Hz mode.
If you double tap in an open area the plus and minus buttons will change to multiply and divide buttons. Tapping these will multiply by 2 and divide by 2. Long pressing the buttons will continue to increment by 2.
For best results, the shaft needs a unique feature so you can tell if the shaft appears stationary. If the shaft does not have a unique feature, referred to as a timing mark, you could simply mark the shaft when it is not spinning, that acts as the needed feature.
-External Flash
A Nova external flash can be connected through bluetooth for additional functionality.
For more information about the Nova flash visit www.novaphotos.com
RPM Stroboscope is a simple stroboscope app that aids in determining the speed of rotating objects or the frequency of vibrating objects.
-Function
There are two modes that can be used, this is indicated by the label above the text field. When the label displays RPM, the value in the text field below displays the value in revolutions per second and the light flashes corresponding to that value. When shining the flashing light at a shaft that is spinning, it will appear to be stationary if the speed is the same as the value indicated.
Similarly, when in hertz mode the label will display Hz instead of RPM. In this case the value in the text field is converted to Hz and the light flashes corresponding to this value.
To switch between modes simply tap on the label. When in either mode, if you want to verify shaft speed or vibration frequency, you can tap on the text field and enter the value you want to verify.
If the speed or frequency is unknown, you can use the plus and minus buttons on either side of the text field to increment the value in order to find the speed or frequency. Long pressing on the plus or minus buttons will increment the value by 10 when in RPM mode and by 2 when in Hz mode.
If you double tap in an open area the plus and minus buttons will change to multiply and divide buttons. Tapping these will multiply by 2 and divide by 2. Long pressing the buttons will continue to increment by 2.
For best results, the shaft needs a unique feature so you can tell if the shaft appears stationary. If the shaft does not have a unique feature, referred to as a timing mark, you could simply mark the shaft when it is not spinning, that acts as the needed feature.
-External Flash
A Nova external flash can be connected through bluetooth for additional functionality.
For more information about the Nova flash visit www.novaphotos.com
Show More
최신 버전 1.3.1의 새로운 기능
Last updated on May 2, 2019
오래된 버전
Fixes problem that would prevent light from flashing
Show More
Version History
1.3.1
May 2, 2019
Fixes problem that would prevent light from flashing
1.3
Dec 16, 2017
- Added German Localization
- Updated for iOS 11 & iPhone X
- Minor Bug Fixes
- Updated for iOS 11 & iPhone X
- Minor Bug Fixes
1.2
Aug 2, 2016
-Added the ability to connect to a Nova Bluetooth flash
-Replaced iAds with Admob
-Replaced iAds with Admob
1.1
Dec 4, 2015
In Version 1.1 the following changes have been made:
- Changed name of the app to RPM Stroboscope to try and avoid confusion
- Updated UI
- Updated app icon
- Added multiplication and division functionality
- Added instruction walk-through which explains how to use the app
- Added ability to remove ads through in app purchase
- Removed light duration slider
- Changed name of the app to RPM Stroboscope to try and avoid confusion
- Updated UI
- Updated app icon
- Added multiplication and division functionality
- Added instruction walk-through which explains how to use the app
- Added ability to remove ads through in app purchase
- Removed light duration slider
1.0
Jul 13, 2015
RPM Stroboscope FAQ
제한된 국가 또는 지역에서 RPM Stroboscope를 다운로드하는 방법을 알아보려면 여기를 클릭하십시오.
RPM Stroboscope의 최소 요구 사항을 보려면 다음 목록을 확인하십시오.
iPhone
iOS 12.0 이상 필요.
iPad
iPadOS 12.0 이상 필요.
iPod touch
iOS 12.0 이상 필요.
RPM Stroboscope은 다음 언어를 지원합니다. 독일어, 영어
RPM Stroboscope에는 인앱 구매가 포함되어 있습니다. 아래 요금제를 확인하세요.
Remove Ads
₩3,300