Sapphire EC3
Steelwork design to EN1993-1-1
￦179,000
20.06for iPhone, iPad and more
Age Rating
Sapphire EC3 스크린 샷
About Sapphire EC3
General steelwork member design based upon Eurocode EN1993-1-1:2005 (EC3).
The required input data is kept to a minimum to simplify the process.
All calculations are presented so that the engineer can assess any assumptions and interpretations of the Standards and see why a member passes or fails the design, as well as facilitating cross-checking with other parties. The calculation sheet can be exported as PDF or printed via Airprint if available on your network.
Calculation sheets can be saved for reuse. The app uses the standard iOS11+ document browser, making it easy to create, import, export, rename, copy, etc.
A library of European and British steel sections is included, and custom sizes can be specified.
A library of steel grades is included, and custom properties can be specified.
Please note that due to the nature of the Eurocodes, this software is to be used only by suitably qualified engineers.
Scope of app:
* Designs classes 1, 2, and 3 sections.
* Hot-rolled and welded I/H, channels, tees, rectangular & circular hollow sections, equal & unequal angles.
* General parameters (no specific national annexes).
* Force magnitudes are considered to act either favourably or unfavourably as appropriate for the context, on the side of conservatism.
* Torsion in open sections is considered by way of bi-moments in the flanges.
* For lateral-torsional buckling of asymmetrical cross-sections, Mcr is calculated with reference to BS5950.
* Where the EC3 is vague or unclear, simplifying assumptions and interpretations are made with reference to the SCI, BS5950, and other authorities, to allow pragmatic completion of the design.
The required input data is kept to a minimum to simplify the process.
All calculations are presented so that the engineer can assess any assumptions and interpretations of the Standards and see why a member passes or fails the design, as well as facilitating cross-checking with other parties. The calculation sheet can be exported as PDF or printed via Airprint if available on your network.
Calculation sheets can be saved for reuse. The app uses the standard iOS11+ document browser, making it easy to create, import, export, rename, copy, etc.
A library of European and British steel sections is included, and custom sizes can be specified.
A library of steel grades is included, and custom properties can be specified.
Please note that due to the nature of the Eurocodes, this software is to be used only by suitably qualified engineers.
Scope of app:
* Designs classes 1, 2, and 3 sections.
* Hot-rolled and welded I/H, channels, tees, rectangular & circular hollow sections, equal & unequal angles.
* General parameters (no specific national annexes).
* Force magnitudes are considered to act either favourably or unfavourably as appropriate for the context, on the side of conservatism.
* Torsion in open sections is considered by way of bi-moments in the flanges.
* For lateral-torsional buckling of asymmetrical cross-sections, Mcr is calculated with reference to BS5950.
* Where the EC3 is vague or unclear, simplifying assumptions and interpretations are made with reference to the SCI, BS5950, and other authorities, to allow pragmatic completion of the design.
Show More
최신 버전 20.06의 새로운 기능
Last updated on Jun 17, 2020
오래된 버전
* Fixes bug that limited access to iCloud files.
Show More
Version History
20.06
Jun 17, 2020
* Fixes bug that limited access to iCloud files.
19.10
Oct 21, 2019
Added steel section library for the United States and South Africa.
Miscellaneous improvements.
Miscellaneous improvements.
19.08
Aug 28, 2019
* Improved document handling.
* Easier to work on multiple documents (calculation sheets) and switch between them.
* Help and demonstration available from within the document browser.
* Easier to work on multiple documents (calculation sheets) and switch between them.
* Help and demonstration available from within the document browser.
19.05
May 31, 2019
* Design forces are now given as a set of factored loadcases.
* PDF output now includes a separate summary sheet as well as the full calculations.
* Multiple calculation sheets can be combined in a single PDF by selecting the documents in the file browser.
* Fixed bug whereby the torsional section modulus was not being updated under certain circumstances.
* Miscellaneous improvements.
Please see in-app Help documentation for more details.
* PDF output now includes a separate summary sheet as well as the full calculations.
* Multiple calculation sheets can be combined in a single PDF by selecting the documents in the file browser.
* Fixed bug whereby the torsional section modulus was not being updated under certain circumstances.
* Miscellaneous improvements.
Please see in-app Help documentation for more details.
19.03
Mar 28, 2019
* Added choice of unit systems (via Settings app): EU metric, UK metric, and US customary.
* Section and material libraries now display item summaries while browsing.
* Numeric data fields now use a specialised numeric keyboard instead of the generic system keyboard.
* Improved page breaks in PDF export of calculation sheets.
* Section and material libraries now display item summaries while browsing.
* Numeric data fields now use a specialised numeric keyboard instead of the generic system keyboard.
* Improved page breaks in PDF export of calculation sheets.
18.12
Dec 7, 2018
Sapphire EC3 FAQ
제한된 국가 또는 지역에서 Sapphire EC3를 다운로드하는 방법을 알아보려면 여기를 클릭하십시오.
Sapphire EC3의 최소 요구 사항을 보려면 다음 목록을 확인하십시오.
iPhone
iOS 12.1 이상 필요.
iPad
iPadOS 12.1 이상 필요.
iPod touch
iOS 12.1 이상 필요.
Sapphire EC3은 다음 언어를 지원합니다. 영어
