Sapphire EC3
Steelwork design to EN1993-1-1
USD 119.99
20.06for iPhone, iPad and more
Age Rating
لقطات الشاشة لـ Sapphire EC3
About Sapphire EC3
General steelwork member design based upon Eurocode EN1993-1-1:2005 (EC3).
The required input data is kept to a minimum to simplify the process.
All calculations are presented so that the engineer can assess any assumptions and interpretations of the Standards and see why a member passes or fails the design, as well as facilitating cross-checking with other parties. The calculation sheet can be exported as PDF or printed via Airprint if available on your network.
Calculation sheets can be saved for reuse. The app uses the standard iOS11+ document browser, making it easy to create, import, export, rename, copy, etc.
A library of European and British steel sections is included, and custom sizes can be specified.
A library of steel grades is included, and custom properties can be specified.
Please note that due to the nature of the Eurocodes, this software is to be used only by suitably qualified engineers.
Scope of app:
* Designs classes 1, 2, and 3 sections.
* Hot-rolled and welded I/H, channels, tees, rectangular & circular hollow sections, equal & unequal angles.
* General parameters (no specific national annexes).
* Force magnitudes are considered to act either favourably or unfavourably as appropriate for the context, on the side of conservatism.
* Torsion in open sections is considered by way of bi-moments in the flanges.
* For lateral-torsional buckling of asymmetrical cross-sections, Mcr is calculated with reference to BS5950.
* Where the EC3 is vague or unclear, simplifying assumptions and interpretations are made with reference to the SCI, BS5950, and other authorities, to allow pragmatic completion of the design.
The required input data is kept to a minimum to simplify the process.
All calculations are presented so that the engineer can assess any assumptions and interpretations of the Standards and see why a member passes or fails the design, as well as facilitating cross-checking with other parties. The calculation sheet can be exported as PDF or printed via Airprint if available on your network.
Calculation sheets can be saved for reuse. The app uses the standard iOS11+ document browser, making it easy to create, import, export, rename, copy, etc.
A library of European and British steel sections is included, and custom sizes can be specified.
A library of steel grades is included, and custom properties can be specified.
Please note that due to the nature of the Eurocodes, this software is to be used only by suitably qualified engineers.
Scope of app:
* Designs classes 1, 2, and 3 sections.
* Hot-rolled and welded I/H, channels, tees, rectangular & circular hollow sections, equal & unequal angles.
* General parameters (no specific national annexes).
* Force magnitudes are considered to act either favourably or unfavourably as appropriate for the context, on the side of conservatism.
* Torsion in open sections is considered by way of bi-moments in the flanges.
* For lateral-torsional buckling of asymmetrical cross-sections, Mcr is calculated with reference to BS5950.
* Where the EC3 is vague or unclear, simplifying assumptions and interpretations are made with reference to the SCI, BS5950, and other authorities, to allow pragmatic completion of the design.
Show More
تحديث لأحدث إصدار 20.06
Last updated on 17/06/2020
الإصدارات القديمة
* Fixes bug that limited access to iCloud files.
Show More
Version History
20.06
17/06/2020
* Fixes bug that limited access to iCloud files.
19.10
21/10/2019
Added steel section library for the United States and South Africa.
Miscellaneous improvements.
Miscellaneous improvements.
19.08
28/08/2019
* Improved document handling.
* Easier to work on multiple documents (calculation sheets) and switch between them.
* Help and demonstration available from within the document browser.
* Easier to work on multiple documents (calculation sheets) and switch between them.
* Help and demonstration available from within the document browser.
19.05
31/05/2019
* Design forces are now given as a set of factored loadcases.
* PDF output now includes a separate summary sheet as well as the full calculations.
* Multiple calculation sheets can be combined in a single PDF by selecting the documents in the file browser.
* Fixed bug whereby the torsional section modulus was not being updated under certain circumstances.
* Miscellaneous improvements.
Please see in-app Help documentation for more details.
* PDF output now includes a separate summary sheet as well as the full calculations.
* Multiple calculation sheets can be combined in a single PDF by selecting the documents in the file browser.
* Fixed bug whereby the torsional section modulus was not being updated under certain circumstances.
* Miscellaneous improvements.
Please see in-app Help documentation for more details.
19.03
28/03/2019
* Added choice of unit systems (via Settings app): EU metric, UK metric, and US customary.
* Section and material libraries now display item summaries while browsing.
* Numeric data fields now use a specialised numeric keyboard instead of the generic system keyboard.
* Improved page breaks in PDF export of calculation sheets.
* Section and material libraries now display item summaries while browsing.
* Numeric data fields now use a specialised numeric keyboard instead of the generic system keyboard.
* Improved page breaks in PDF export of calculation sheets.
18.12
07/12/2018
Sapphire EC3 FAQ
انقر هنا لمعرفة كيفية تنزيل Sapphire EC3 في بلد أو منطقة محظورة.
تحقق من القائمة التالية لمعرفة الحد الأدنى من المتطلبات Sapphire EC3.
iPhone
Requiere iOS 12.1 o posterior.
iPad
Requiere iPadOS 12.1 o posterior.
iPod touch
Requiere iOS 12.1 o posterior.
Sapphire EC3 هي مدعومة على اللغات Inglés