bmLINK Tool
Bluetooth Mesh commissioning
免費
1.33.4for iPhone, iPad and more
Age Rating
bmLINK Tool 螢幕截圖
About bmLINK Tool
The app bmLINK Tool is to group bmLINK devices or other compatible lighting controls using standard Bluetooth components into a Bluetooth Mesh network.
The app enables the commissioning of the devices on site after a commissioning plan has been created.
For the app bmLINK Tool is an iOS device with iOS 12+ and activated Bluetooth function required as well as an existing Internet connection (WiFi or mobile).
The app bmLINK Tool also provides basic project management features and enables the user to assign, configure and monitor the bmLINK devices.
The bmLINK Sender and Receiver devices are made to extend standard DALI lighting control systems with a standard Bluetooth mesh connection to DALI Luminaires.
The app enables the commissioning of the devices on site after a commissioning plan has been created.
For the app bmLINK Tool is an iOS device with iOS 12+ and activated Bluetooth function required as well as an existing Internet connection (WiFi or mobile).
The app bmLINK Tool also provides basic project management features and enables the user to assign, configure and monitor the bmLINK devices.
The bmLINK Sender and Receiver devices are made to extend standard DALI lighting control systems with a standard Bluetooth mesh connection to DALI Luminaires.
Show More
最新版本1.33.4更新日誌
Last updated on 2023年10月25日
歷史版本
• Added support for McWong Kinetic Switch (primarily N.A. market)
Show More
Version History
1.33.4
2023年10月25日
• Added support for McWong Kinetic Switch (primarily N.A. market)
1.33.3
2023年07月13日
• Added support for EnOcean PTM-216B Switch
1.33.2
2023年06月09日
• Bugfixes and performance improvements
1.33.1
2023年03月07日
• ELT improvements
We have introduced changes to how emergency lighting test results are gathered and presented in the app.
• Bugfixes and stability improvements
We have fixed a number of minor bugs and performance issues.
We have introduced changes to how emergency lighting test results are gathered and presented in the app.
• Bugfixes and stability improvements
We have fixed a number of minor bugs and performance issues.
1.33
2023年02月09日
• ELT improvements
We have introduced changes to how emergency lighting test results are gathered and presented in the app.
• Bugfixes and stability improvements
We have fixed a number of minor bugs and performance issues.
We have introduced changes to how emergency lighting test results are gathered and presented in the app.
• Bugfixes and stability improvements
We have fixed a number of minor bugs and performance issues.
1.32
2022年06月30日
• Account removal
We are introducing an in-app account deletion option to provide users with greater control over their personal data.
• Simplified user name field
We are replacing the “First name” and “Last name” fields with a single “Full name” field to better support our users from different countries and cultures.
• Editable user account data
Users can now edit their basic account information (full name & company name) that they provided when they created their account.
We are introducing an in-app account deletion option to provide users with greater control over their personal data.
• Simplified user name field
We are replacing the “First name” and “Last name” fields with a single “Full name” field to better support our users from different countries and cultures.
• Editable user account data
Users can now edit their basic account information (full name & company name) that they provided when they created their account.
1.31
2022年06月02日
• Manual selection of Time Authority
We are adding the possibility of manual selection of Time Authority. Users will now be able to choose which device should perform this function.
We are adding the possibility of manual selection of Time Authority. Users will now be able to choose which device should perform this function.
1.30.3
2022年04月22日
• Bugfixes and performance improvements.
1.30.2
2022年03月24日
• Bugfixes and performance improvements.
1.30.1
2021年11月22日
• Configurable attention sequence
The app now supports the alternative attention sequence that was introduced for non-standard luminaires (high-bay LEDs, high-power luminaires, etc.)
The app now supports the alternative attention sequence that was introduced for non-standard luminaires (high-bay LEDs, high-power luminaires, etc.)
1.30
2021年10月07日
• In-node scheduling
We are introducing the in-node scheduling service to enable cost-efficient scheduling in installations without the Internet connection.
• Occupancy events history for detection of false triggering
We are adding a sensor troubleshooting tool that will enable users to view the occupancy events history in order to easily detect false sensor triggering.
We are introducing the in-node scheduling service to enable cost-efficient scheduling in installations without the Internet connection.
• Occupancy events history for detection of false triggering
We are adding a sensor troubleshooting tool that will enable users to view the occupancy events history in order to easily detect false sensor triggering.
1.29
2021年08月12日
• Device-level mesh quality tests
We are improving the granularity of mesh quality tests so that test results are now provided individually for each device within the tested zone.
We are improving the granularity of mesh quality tests so that test results are now provided individually for each device within the tested zone.
1.28.1
2021年07月05日
• Support for Finnish language
As a follow-up to the recent web app update, we are now adding Finnish language support also to the mobile app.
• Vibration and sound notifications
We are introducing vibration and sound notifications that will be triggered whenever the mobile app successfully completes a longer process as well as in the event of failure/warning messages.
As a follow-up to the recent web app update, we are now adding Finnish language support also to the mobile app.
• Vibration and sound notifications
We are introducing vibration and sound notifications that will be triggered whenever the mobile app successfully completes a longer process as well as in the event of failure/warning messages.
1.28
2021年05月27日
• Improved mesh quality test algorithms
Redesigned mesh quality test procedures will enable more granular and effective testing of communication between devices. From now on, the testing covers all devices within an area while installers are provided with more transparent and accurate test results.
• Convenient testing of zones with multiple scenes and scheduling
When commissioning zones with multiple scenes or scheduling profiles, the app will now display custom scene buttons in the test tab to enable convenient zone testing.
Redesigned mesh quality test procedures will enable more granular and effective testing of communication between devices. From now on, the testing covers all devices within an area while installers are provided with more transparent and accurate test results.
• Convenient testing of zones with multiple scenes and scheduling
When commissioning zones with multiple scenes or scheduling profiles, the app will now display custom scene buttons in the test tab to enable convenient zone testing.
1.27.1
2021年02月18日
Bugfixes
1.27
2020年12月22日
• Faster and more transparent calibration
The “parallel connections” feature introduced in the previous release has now been applied also to the calibration process, reducing the calibration time by up to 50% and providing users with clear progress information.
• Support for Spanish and traditional Chinese
Our mobile app now supports two additional languages: Spanish and traditional Chinese.
The “parallel connections” feature introduced in the previous release has now been applied also to the calibration process, reducing the calibration time by up to 50% and providing users with clear progress information.
• Support for Spanish and traditional Chinese
Our mobile app now supports two additional languages: Spanish and traditional Chinese.
1.26
2020年11月05日
• Faster configuration with parallel connections
Devices can now be configured via multiple parallel connections. In certain configuration scenarios, this can reduce the total configuration time by even up to 5x.
• Light levels for scenes A and B configurable in the profile
Light levels for scenes A and B can now be defined directly on the profile screen during the remote planning/pre-commissioning stage.
• Simplified over-the-air update process
The OTAU screen now displays each device’s firmware version number and informs how many devices within each zone require an update.
• Improved sensor calibration in projects with zone linking
Once the calibration process is completed within a given zone, it will no longer restore automatic control in the zones that are linked to that zone.
• Current light sensor lux level reading
Whenever you open the sensor panel, the app will now ask the sensor about its current lux level reading and display that information on the screen.
Devices can now be configured via multiple parallel connections. In certain configuration scenarios, this can reduce the total configuration time by even up to 5x.
• Light levels for scenes A and B configurable in the profile
Light levels for scenes A and B can now be defined directly on the profile screen during the remote planning/pre-commissioning stage.
• Simplified over-the-air update process
The OTAU screen now displays each device’s firmware version number and informs how many devices within each zone require an update.
• Improved sensor calibration in projects with zone linking
Once the calibration process is completed within a given zone, it will no longer restore automatic control in the zones that are linked to that zone.
• Current light sensor lux level reading
Whenever you open the sensor panel, the app will now ask the sensor about its current lux level reading and display that information on the screen.
1.25
2020年09月24日
• More profile customization options
You no longer have to switch to the web app to customize the manual override timeout or low/high end trim settings.
• Faster configuration
We’ve accelerated the configuration process, reducing the time required to configure individual nodes by up to 50%.
• Screen lock prevention
For as long as it remains in use, the mobile app will now disable your smartphone’s automatic screen locking functionality.
• Support for Chinese and Korean
The mobile app is now available in two more languages - Chinese and Korean.
You no longer have to switch to the web app to customize the manual override timeout or low/high end trim settings.
• Faster configuration
We’ve accelerated the configuration process, reducing the time required to configure individual nodes by up to 50%.
• Screen lock prevention
For as long as it remains in use, the mobile app will now disable your smartphone’s automatic screen locking functionality.
• Support for Chinese and Korean
The mobile app is now available in two more languages - Chinese and Korean.
1.24
2020年08月20日
• Help center
The app provides direct access to essential support documents, including user manuals, application notes, and tutorials.
• Hidden devices management
Users can now easily restore hidden devices without having to perform a hardware reset.
• Mesh quality test improvements
We’ve improved the mesh quality test procedure so that test results are more meaningful and reliable.
• Micro-gateway configuration
The mobile app now enables users to configure and commission a micro-gateway device.
The app provides direct access to essential support documents, including user manuals, application notes, and tutorials.
• Hidden devices management
Users can now easily restore hidden devices without having to perform a hardware reset.
• Mesh quality test improvements
We’ve improved the mesh quality test procedure so that test results are more meaningful and reliable.
• Micro-gateway configuration
The mobile app now enables users to configure and commission a micro-gateway device.
1.23
2020年07月16日
• Automatic proxy
No more proxy node configuration. Each node automatically becomes a proxy when the mobile app is around (requires devices with Silvair Firmware v.2.17 and project version 202005).
• Shared project deep-linking
When opened on mobile devices, project links now automatically redirect users to the mobile app's Projects section.
• UI navigation improvements
In-app suggestions help users choose the most convenient tool (mobile/web app) for certain tasks.
• Update guidance
When an update is required, the app now provides precise instructions along with an App Store link.
No more proxy node configuration. Each node automatically becomes a proxy when the mobile app is around (requires devices with Silvair Firmware v.2.17 and project version 202005).
• Shared project deep-linking
When opened on mobile devices, project links now automatically redirect users to the mobile app's Projects section.
• UI navigation improvements
In-app suggestions help users choose the most convenient tool (mobile/web app) for certain tasks.
• Update guidance
When an update is required, the app now provides precise instructions along with an App Store link.
1.22
2020年06月10日
• All devices within a given area can be configured at once.
• The search panel in the diagnostics window helps to find a cell that contains the searched string.
• The search panel in the diagnostics window helps to find a cell that contains the searched string.
1.21
2020年04月16日
• Projects, areas, and zones are protected against accidental removal
• The newest projects can be found at the top of the list
• The emergency lighting test report can be gathered from the self-testing emergency lighting devices
• New photocell scenario allows to control light based on whether it is getting bright or dark to support outdoor lighting requirements
• The newest projects can be found at the top of the list
• The emergency lighting test report can be gathered from the self-testing emergency lighting devices
• New photocell scenario allows to control light based on whether it is getting bright or dark to support outdoor lighting requirements
1.20
2020年03月02日
• Default light level parameter can be changed after opening customization view in manual control scenarios.
• Fade time parameter can be customized for default light level in manual control scenarios.
• When adding incompatible EnOcean device to the zone, 'Device is not supported' error message is displayed.
• Non-activated devices and devices not available for commissioning are clearly distinguished on a devices list while adding.
• Daylight harvesting calibration improvements. Now defining minimum light level is required to perform light sensor calibration.
• Improvements in views showing light level and color temperature sliders.
• Added error message when RPL limit is exceeded.
• Diagnostic panel improvements.
• French language support.
• Fade time parameter can be customized for default light level in manual control scenarios.
• When adding incompatible EnOcean device to the zone, 'Device is not supported' error message is displayed.
• Non-activated devices and devices not available for commissioning are clearly distinguished on a devices list while adding.
• Daylight harvesting calibration improvements. Now defining minimum light level is required to perform light sensor calibration.
• Improvements in views showing light level and color temperature sliders.
• Added error message when RPL limit is exceeded.
• Diagnostic panel improvements.
• French language support.
1.19
2020年01月09日
• Added end user role to collaborators. End users can view the project and control devices in zones, but cannot make any changes.
• Central Control scenario shows sensor data in test tab.
• After opening the area view with a list of zones, the name of that area is displayed on the top bar.
• When logging out of the app, user sees the username (the email address provided during registration).
• The color temperature slider is removed from profile customization view and is now available in the test tab.
• Stability and performance improvements.
• Default light level parameter can be customized for Manual control scenarios.
• Central Control scenario shows sensor data in test tab.
• After opening the area view with a list of zones, the name of that area is displayed on the top bar.
• When logging out of the app, user sees the username (the email address provided during registration).
• The color temperature slider is removed from profile customization view and is now available in the test tab.
• Stability and performance improvements.
• Default light level parameter can be customized for Manual control scenarios.
1.18
2019年12月05日
• Added manager and installer user roles to the commissioning project management. Each role has a set of varied user permissions.
• Added user role picker for inviting new collaborators to the project.
• User roles are displayed on collaborators list and on pending invitations.
• When a device is disconnected from Bluetooth, user will see a popup with information “Bluetooth required”.
• Performance improvements and minor bug fixes.
• Added user role picker for inviting new collaborators to the project.
• User roles are displayed on collaborators list and on pending invitations.
• When a device is disconnected from Bluetooth, user will see a popup with information “Bluetooth required”.
• Performance improvements and minor bug fixes.
bmLINK Tool FAQ
點擊此處瞭解如何在受限國家或地區下載bmLINK Tool。
以下為bmLINK Tool的最低配置要求。
iPhone
須使用 iOS 13.0 或以上版本。
iPad
須使用 iPadOS 13.0 或以上版本。
iPod touch
須使用 iOS 13.0 或以上版本。
bmLINK Tool支持德文, 法文, 簡體中文, 繁體中文, 芬蘭文, 英文, 西班牙文, 韓文
