PROset App
免費
1.6.3for iPhone, iPad and more
Age Rating
PROset App 螢幕截圖
About PROset App
Thanks to the PROset technology, the addressing, configuration and maintenance of the emergency luminaires is a breeze: the luminaires equipped with the new EMpower PROset control gear can be programmed directly via NFC interface of control gear.
Procedure: with the PROset Pen (article number: 22170290), the control gear of the luminaire can be programmed directly. The PROset app provides additional functions (dimming levels, Black box, control gear exchange via the database). For this, the smartphone can be paired with the PROset Pen via Bluetooth (select “Connection via Bluetooth” on the start screen).
Note: Before the first writing process, a control gear must be read out -> The article number and designation of the luminaire as well as the address range are available.
Addressing: small, difficult-to-operate rotary switches belong to the past. The address can be selected by simply scrolling.
Switching mode: Selection between maintained light (switched on in mains and emergency operation) and non-maintained light (switched off in mains operation). Setting for luminaires without connection to a system / parameter is overwritten by the system to "maintained light".
Dimming level: Setting of the dimming level in mains operation (AC level) and in emergency operation (DC level, only for centrally supplied emergency luminaires). Setting for luminaires without connection to a system / parameter is overwritten by the system to default settings.
Maintenance / Black box feature: With the new NFC interface, statistics such as errors, temperature, tests and operating times are immediately available.
Maintenance / device exchange: simple control gear exchange via the NFC interface. The configuration data (operating parameters of the LEDs) can be copied from an old control gear or selected from a database.
Device exchange via copy function: Activate device exchange -> Read out the configuration data from the old control gear -> Write the configuration data on the new control gear. The address, switching type and dimming levels are also transferred.
Device exchange via the database: Select the article number -> Write the configuration data on the new control gear. Address, switching mode and dimming levels can be configured in a second step.
Features of the app:
- Fast and easy operation
- Easy setting of the address via a scroll wheel. The simple configuration excludes incorrect switch settings.
- Configuration of the luminaire (switching mode, dimming levels) possible without central controller.
- Maintenance: The Black box function displays statistics such as errors, temperature, tests and operating times. Contents of the black box data can be forwarded to the headquarters for further analysis.
- Control gear exchange via the copy function or the integrated database
Procedure: with the PROset Pen (article number: 22170290), the control gear of the luminaire can be programmed directly. The PROset app provides additional functions (dimming levels, Black box, control gear exchange via the database). For this, the smartphone can be paired with the PROset Pen via Bluetooth (select “Connection via Bluetooth” on the start screen).
Note: Before the first writing process, a control gear must be read out -> The article number and designation of the luminaire as well as the address range are available.
Addressing: small, difficult-to-operate rotary switches belong to the past. The address can be selected by simply scrolling.
Switching mode: Selection between maintained light (switched on in mains and emergency operation) and non-maintained light (switched off in mains operation). Setting for luminaires without connection to a system / parameter is overwritten by the system to "maintained light".
Dimming level: Setting of the dimming level in mains operation (AC level) and in emergency operation (DC level, only for centrally supplied emergency luminaires). Setting for luminaires without connection to a system / parameter is overwritten by the system to default settings.
Maintenance / Black box feature: With the new NFC interface, statistics such as errors, temperature, tests and operating times are immediately available.
Maintenance / device exchange: simple control gear exchange via the NFC interface. The configuration data (operating parameters of the LEDs) can be copied from an old control gear or selected from a database.
Device exchange via copy function: Activate device exchange -> Read out the configuration data from the old control gear -> Write the configuration data on the new control gear. The address, switching type and dimming levels are also transferred.
Device exchange via the database: Select the article number -> Write the configuration data on the new control gear. Address, switching mode and dimming levels can be configured in a second step.
Features of the app:
- Fast and easy operation
- Easy setting of the address via a scroll wheel. The simple configuration excludes incorrect switch settings.
- Configuration of the luminaire (switching mode, dimming levels) possible without central controller.
- Maintenance: The Black box function displays statistics such as errors, temperature, tests and operating times. Contents of the black box data can be forwarded to the headquarters for further analysis.
- Control gear exchange via the copy function or the integrated database
Show More
最新版本1.6.3更新日誌
Last updated on 2024年02月09日
歷史版本
Minor improvements
Show More
Version History
1.6.3
2024年02月09日
Minor improvements
1.6.2
2023年07月04日
Bugfixes:
EMpower PROset ECP control gear: In some cases emergency luminaires with control gear EMpower PROset ECP could not be addressed.
EMpower PROset ECP control gear: In some cases emergency luminaires with control gear EMpower PROset ECP could not be addressed.
1.6.0
2022年11月15日
New features:
- the NFC connection to the EMpower PROset ballast is now possible also using iPhones / iOS mobile devices. This enables the user to read out and configure the EMpower PROset ballasts using the iOS mobile devices without the aid of the PROset Pen.
- immediately after reading out the ballast, the app provides a link to the luminaire datasheet as well to the Zumtobel eShop. The App also lists all relevant spare parts for the luminaire and provides a link to Zumtobel eShop. This way the user can easily order the needed components in case a defect has occurred.
- the App offers further information on the EMpower PROset ballast: current HW&FW-Version as well as the luminaire type: exit sign/safety luminaire.
- spare part ballasts can be now configured directly without the need of a prior power cycle.
Additional features for the EMpower PROset ExD (E1D, E3D, E8D) ballast:
- signalize the current status of the luminaire. In case of an error, the type of error is shown. The error status information is available starting with the FW-Version 1.0.35 of the ballast.
- enable the visualization and configuration of the Status LED Intensity
- allow the deactivation of the Autotest feature, converting the luminaire to a Manual test version.
- enable the configuration of the switching mode: maintained/non-maintained/switched maintained
Additional features for the EMpower PROset ECP ballast:
- visualization of the eBox sub-distribution and output circuit number
- possibility to correct the ballast random address in case it was wrongly stored
Additional features for the EMpower PROset ELP ballast:
- visualization of the nBox controller device-ID & output circuit where the ballast was installed
- visualization & configuration of the PLC carrier frequency
Further improvements:
- NFC connection: user is notified in case the mobile device NFC-interface is not enabled
- Bluetooth connection: user is allowed to enable the mobile device BLE-interface in case it is not yet enabled
- luminaires configurations are automatically loaded on PROset App startup each time a new ballast configuration is available
- the NFC connection to the EMpower PROset ballast is now possible also using iPhones / iOS mobile devices. This enables the user to read out and configure the EMpower PROset ballasts using the iOS mobile devices without the aid of the PROset Pen.
- immediately after reading out the ballast, the app provides a link to the luminaire datasheet as well to the Zumtobel eShop. The App also lists all relevant spare parts for the luminaire and provides a link to Zumtobel eShop. This way the user can easily order the needed components in case a defect has occurred.
- the App offers further information on the EMpower PROset ballast: current HW&FW-Version as well as the luminaire type: exit sign/safety luminaire.
- spare part ballasts can be now configured directly without the need of a prior power cycle.
Additional features for the EMpower PROset ExD (E1D, E3D, E8D) ballast:
- signalize the current status of the luminaire. In case of an error, the type of error is shown. The error status information is available starting with the FW-Version 1.0.35 of the ballast.
- enable the visualization and configuration of the Status LED Intensity
- allow the deactivation of the Autotest feature, converting the luminaire to a Manual test version.
- enable the configuration of the switching mode: maintained/non-maintained/switched maintained
Additional features for the EMpower PROset ECP ballast:
- visualization of the eBox sub-distribution and output circuit number
- possibility to correct the ballast random address in case it was wrongly stored
Additional features for the EMpower PROset ELP ballast:
- visualization of the nBox controller device-ID & output circuit where the ballast was installed
- visualization & configuration of the PLC carrier frequency
Further improvements:
- NFC connection: user is notified in case the mobile device NFC-interface is not enabled
- Bluetooth connection: user is allowed to enable the mobile device BLE-interface in case it is not yet enabled
- luminaires configurations are automatically loaded on PROset App startup each time a new ballast configuration is available
1.5.3
2021年02月04日
Rebranding
1.5.0
2020年11月18日
Support for the EMpower PROset ELP 48V control gears
- configuration of address, switching mode and control value in mains and emergency operation
- device exchange (via copy function and via the database)
- blackbox feature
Extended support for the EMpower PROset ECC control gear
- configuration of the control value in emergency operation
- configuration of address, switching mode and control value in mains and emergency operation
- device exchange (via copy function and via the database)
- blackbox feature
Extended support for the EMpower PROset ECC control gear
- configuration of the control value in emergency operation
1.2.0
2019年04月13日
- now also centrally supplied emergency luminaires ECD, ECP and ECC can be configured and maintained via the PROset App
- the function READ allows you to see configured values (e.g. the set address) directly in the application, without the need of connecting and disconnecting the luminaire from the mains supply
- BLUETOOTH CONNECTION: if several PROset Pen are within reach of the application, the desired Pen can be identified by its serial number. The serial number can be found on the label
- the function READ allows you to see configured values (e.g. the set address) directly in the application, without the need of connecting and disconnecting the luminaire from the mains supply
- BLUETOOTH CONNECTION: if several PROset Pen are within reach of the application, the desired Pen can be identified by its serial number. The serial number can be found on the label
1.1.1
2018年07月12日
Addressing, configuration and maintenance of emergency luminaires via NFC interface
1.1.0
2018年06月15日
- Addressing, configuration and maintenance of emergency luminaires via NFC interface
- Data Privacy Statement
- Data Privacy Statement
1.0
2018年04月12日
PROset App FAQ
點擊此處瞭解如何在受限國家或地區下載PROset App。
以下為PROset App的最低配置要求。
iPhone
須使用 iOS 12.4 或以上版本。
iPad
須使用 iPadOS 12.4 或以上版本。
iPod touch
須使用 iOS 12.4 或以上版本。
PROset App支持英文
