SmartSpeed Plus
Next gen timing gate system
免費
1.12.1for iPhone, iPad and more
Vald Performance Pty Ltd
Developer
28.9 MB
Size
2024年03月22日
Update Date
Health & Fitness
Category
4+
Age Rating
Age Rating
SmartSpeed Plus 螢幕截圖
About SmartSpeed Plus
Set up and run drills with SmartSpeed Plus, the smartest and easiest-to-use timing gates on the market.
With SmartSpeed Plus, you can enjoy an array of new features, including athlete queue management, live leaderboards, and a more convenient way to find, connect, and reorder your gates via the app. Pre-configure drills in VALD Hub and sync them to your mobile device for streamlined testing workflows. Set up your gates, sync team lists, run drills, and send results back to VALD Hub at the push of a button.
Choose from a variety of running modes, results displays, and testing and training drills. The intuitive SmartSpeed Plus app is designed to make training sessions easy to configure and control. Whether you're a coach, trainer, or athlete, SmartSpeed Plus provides a powerful, streamlined solution for your needs.
Requirements :
- Requires iOS 15 or later
- Requires internet connection (additional fees may apply)
- Requires SmartSpeed Plus hardware
With SmartSpeed Plus, you can enjoy an array of new features, including athlete queue management, live leaderboards, and a more convenient way to find, connect, and reorder your gates via the app. Pre-configure drills in VALD Hub and sync them to your mobile device for streamlined testing workflows. Set up your gates, sync team lists, run drills, and send results back to VALD Hub at the push of a button.
Choose from a variety of running modes, results displays, and testing and training drills. The intuitive SmartSpeed Plus app is designed to make training sessions easy to configure and control. Whether you're a coach, trainer, or athlete, SmartSpeed Plus provides a powerful, streamlined solution for your needs.
Requirements :
- Requires iOS 15 or later
- Requires internet connection (additional fees may apply)
- Requires SmartSpeed Plus hardware
Show More
最新版本1.12.1更新日誌
Last updated on 2024年03月22日
歷史版本
- Bug fixes and improvements
Show More
Version History
1.12.1
2024年03月22日
- Bug fixes and improvements
1.12.0
2024年03月19日
- Lap timing drill
- Bug fixes and improvements
- Bug fixes and improvements
1.11.0
2024年02月23日
- Minor bug fixes and performance improvements.
1.10.0
2024年02月13日
- Firmware 0R8
- Interval protocol with fixed duration interval type (Firmware 0R8 minimum)
- Serpentine drill
- Interval protocol with fixed duration interval type (Firmware 0R8 minimum)
- Serpentine drill
1.9.0
2024年01月31日
- Interval protocol
- Trial validity tagging
- Bug fixes and improvements
- Trial validity tagging
- Bug fixes and improvements
1.8.0
2023年12月06日
- Free-Timing duration and free mode
- Jumps duration mode (drill starts on first contact)
- SmartSpeed Plus Firmware 0R7
- Bug fixes and improvements
- Jumps duration mode (drill starts on first contact)
- SmartSpeed Plus Firmware 0R7
- Bug fixes and improvements
1.7.0
2023年11月13日
- Sprint drills with a break beam start can be reset by passing through the first gate again
1.6.2
2023年10月31日
- Allow direction setting on Change of Direction drills
- Display gate name on Change of Direction drill direction planning
- Buzz on break beam start
- Bug fixes and improvements
- Display gate name on Change of Direction drill direction planning
- Buzz on break beam start
- Bug fixes and improvements
1.6.1
2023年10月13日
Bug fixes and improvements
- Change of Direction planned option set and remembered
- Change of Direction planned option set and remembered
1.6.0
2023年09月20日
- Drill can now be run in a multi-track setting
- Firmware 0R6 (required for multi-track)
- Bug fixes and improvements
- Firmware 0R6 (required for multi-track)
- Bug fixes and improvements
1.5.0
2023年08月03日
- Profile creation
- Accessory check
- Drill reset confirmation
- Minor bug fixes and improvements
- Accessory check
- Drill reset confirmation
- Minor bug fixes and improvements
1.4.0
2023年07月05日
- Firmware updater
- Jump drills (firmware update required)
- Minor bug fixes and improvements
- Jump drills (firmware update required)
- Minor bug fixes and improvements
1.3.1
2023年05月15日
Reactive Pro Agility drill direction can now be edited during a testing session
1.3.0
2023年05月11日
- Profile queue confirmation must have at least 1 profile active to proceed to testing
- RFID support enabled
- RFID and SmartPad can both be enabled simultaneously
- RFID must be connected to the first gate in layout (does not have to be primary)
- Reactive Pro Agility
- Changed to support 4 splits (each 5m section)
- Reaction time is calculated from the signal and athlete leaving the beam
- In-beam only
- Reaction time is visible as separate field and not considered as a split
- Actual and expected direction now available
- Trial number now available in Hub export
- Reaction time is now recorded as the initial split for all drills except Reactive Pro Agility
- Free timing drills are now available
- Only displays time once a trial has been completed
- Gate re-arm time limit increased to 10 seconds
- SmartPad starts now requires a hold start similar to in-beam
- Minor bug fixes and improvements
- RFID support enabled
- RFID and SmartPad can both be enabled simultaneously
- RFID must be connected to the first gate in layout (does not have to be primary)
- Reactive Pro Agility
- Changed to support 4 splits (each 5m section)
- Reaction time is calculated from the signal and athlete leaving the beam
- In-beam only
- Reaction time is visible as separate field and not considered as a split
- Actual and expected direction now available
- Trial number now available in Hub export
- Reaction time is now recorded as the initial split for all drills except Reactive Pro Agility
- Free timing drills are now available
- Only displays time once a trial has been completed
- Gate re-arm time limit increased to 10 seconds
- SmartPad starts now requires a hold start similar to in-beam
- Minor bug fixes and improvements
1.2.0
2023年04月02日
- General UI improvements and bug fixes
- Testing View UI improvements
- Dashboard common drill pre-selects correct drill in drill setup
- SmartPad integration
- Testing View UI improvements
- Dashboard common drill pre-selects correct drill in drill setup
- SmartPad integration
1.1.0
2023年03月22日
- Minor bug fixes and improvements
- UI updates for both app and LED panels
- Prompt for alignment with link to knowledge base for instructions
- UI updates for both app and LED panels
- Prompt for alignment with link to knowledge base for instructions
1.0.0
2023年03月21日
SmartSpeed Plus FAQ
點擊此處瞭解如何在受限國家或地區下載SmartSpeed Plus。
以下為SmartSpeed Plus的最低配置要求。
iPhone
須使用 iOS 15.0 或以上版本。
iPad
須使用 iPadOS 15.0 或以上版本。
iPod touch
須使用 iOS 15.0 或以上版本。
SmartSpeed Plus支持英文
