SmartSpeed Plus
Next gen timing gate system
Free
1.11.0for iPhone, iPad and more
Vald Performance Pty Ltd
Developer
29.2 MB
Size
Feb 23, 2024
Update Date
Health & Fitness
Category
4+
Age Rating
Age Rating
SmartSpeed Plus Screenshots
About SmartSpeed Plus
Set up and run drills with SmartSpeed Plus, the smartest and easiest-to-use timing gates on the market.
With SmartSpeed Plus, you can enjoy an array of new features, including athlete queue management, live leaderboards, and a more convenient way to find, connect, and reorder your gates via the app. Pre-configure drills in VALD Hub and sync them to your mobile device for streamlined testing workflows. Set up your gates, sync team lists, run drills, and send results back to VALD Hub at the push of a button.
Choose from a variety of running modes, results displays, and testing and training drills. The intuitive SmartSpeed Plus app is designed to make training sessions easy to configure and control. Whether you're a coach, trainer, or athlete, SmartSpeed Plus provides a powerful, streamlined solution for your needs.
Requirements :
- Requires iOS 15 or later
- Requires internet connection (additional fees may apply)
- Requires SmartSpeed Plus hardware
With SmartSpeed Plus, you can enjoy an array of new features, including athlete queue management, live leaderboards, and a more convenient way to find, connect, and reorder your gates via the app. Pre-configure drills in VALD Hub and sync them to your mobile device for streamlined testing workflows. Set up your gates, sync team lists, run drills, and send results back to VALD Hub at the push of a button.
Choose from a variety of running modes, results displays, and testing and training drills. The intuitive SmartSpeed Plus app is designed to make training sessions easy to configure and control. Whether you're a coach, trainer, or athlete, SmartSpeed Plus provides a powerful, streamlined solution for your needs.
Requirements :
- Requires iOS 15 or later
- Requires internet connection (additional fees may apply)
- Requires SmartSpeed Plus hardware
Show More
What's New in the Latest Version 1.11.0
Last updated on Feb 23, 2024
Old Versions
- Minor bug fixes and performance improvements.
Show More
Version History
1.11.0
Feb 23, 2024
- Minor bug fixes and performance improvements.
1.10.0
Feb 13, 2024
- Firmware 0R8
- Interval protocol with fixed duration interval type (Firmware 0R8 minimum)
- Serpentine drill
- Interval protocol with fixed duration interval type (Firmware 0R8 minimum)
- Serpentine drill
1.9.0
Jan 31, 2024
- Interval protocol
- Trial validity tagging
- Bug fixes and improvements
- Trial validity tagging
- Bug fixes and improvements
1.8.0
Dec 6, 2023
- Free-Timing duration and free mode
- Jumps duration mode (drill starts on first contact)
- SmartSpeed Plus Firmware 0R7
- Bug fixes and improvements
- Jumps duration mode (drill starts on first contact)
- SmartSpeed Plus Firmware 0R7
- Bug fixes and improvements
1.7.0
Nov 13, 2023
- Sprint drills with a break beam start can be reset by passing through the first gate again
1.6.2
Oct 31, 2023
- Allow direction setting on Change of Direction drills
- Display gate name on Change of Direction drill direction planning
- Buzz on break beam start
- Bug fixes and improvements
- Display gate name on Change of Direction drill direction planning
- Buzz on break beam start
- Bug fixes and improvements
1.6.1
Oct 13, 2023
Bug fixes and improvements
- Change of Direction planned option set and remembered
- Change of Direction planned option set and remembered
1.6.0
Sep 20, 2023
- Drill can now be run in a multi-track setting
- Firmware 0R6 (required for multi-track)
- Bug fixes and improvements
- Firmware 0R6 (required for multi-track)
- Bug fixes and improvements
1.5.0
Aug 3, 2023
- Profile creation
- Accessory check
- Drill reset confirmation
- Minor bug fixes and improvements
- Accessory check
- Drill reset confirmation
- Minor bug fixes and improvements
1.4.0
Jul 5, 2023
- Firmware updater
- Jump drills (firmware update required)
- Minor bug fixes and improvements
- Jump drills (firmware update required)
- Minor bug fixes and improvements
1.3.1
May 15, 2023
Reactive Pro Agility drill direction can now be edited during a testing session
1.3.0
May 11, 2023
- Profile queue confirmation must have at least 1 profile active to proceed to testing
- RFID support enabled
- RFID and SmartPad can both be enabled simultaneously
- RFID must be connected to the first gate in layout (does not have to be primary)
- Reactive Pro Agility
- Changed to support 4 splits (each 5m section)
- Reaction time is calculated from the signal and athlete leaving the beam
- In-beam only
- Reaction time is visible as separate field and not considered as a split
- Actual and expected direction now available
- Trial number now available in Hub export
- Reaction time is now recorded as the initial split for all drills except Reactive Pro Agility
- Free timing drills are now available
- Only displays time once a trial has been completed
- Gate re-arm time limit increased to 10 seconds
- SmartPad starts now requires a hold start similar to in-beam
- Minor bug fixes and improvements
- RFID support enabled
- RFID and SmartPad can both be enabled simultaneously
- RFID must be connected to the first gate in layout (does not have to be primary)
- Reactive Pro Agility
- Changed to support 4 splits (each 5m section)
- Reaction time is calculated from the signal and athlete leaving the beam
- In-beam only
- Reaction time is visible as separate field and not considered as a split
- Actual and expected direction now available
- Trial number now available in Hub export
- Reaction time is now recorded as the initial split for all drills except Reactive Pro Agility
- Free timing drills are now available
- Only displays time once a trial has been completed
- Gate re-arm time limit increased to 10 seconds
- SmartPad starts now requires a hold start similar to in-beam
- Minor bug fixes and improvements
1.2.0
Apr 2, 2023
- General UI improvements and bug fixes
- Testing View UI improvements
- Dashboard common drill pre-selects correct drill in drill setup
- SmartPad integration
- Testing View UI improvements
- Dashboard common drill pre-selects correct drill in drill setup
- SmartPad integration
1.1.0
Mar 22, 2023
- Minor bug fixes and improvements
- UI updates for both app and LED panels
- Prompt for alignment with link to knowledge base for instructions
- UI updates for both app and LED panels
- Prompt for alignment with link to knowledge base for instructions
1.0.0
Mar 21, 2023
SmartSpeed Plus FAQ
Click here to learn how to download SmartSpeed Plus in restricted country or region.
Check the following list to see the minimum requirements of SmartSpeed Plus.
iPhone
Requires iOS 15.0 or later.
iPad
Requires iPadOS 15.0 or later.
iPod touch
Requires iOS 15.0 or later.
SmartSpeed Plus supports English
