Velocate GPS
Free
1.9.6for iPhone, iPad and more
PSP Pauli Services & Products GmbH
Developer
7.2 MB
Size
Nov 10, 2020
Update Date
Navigation
Category
4+
Age Rating
Age Rating
Velocate GPS Screenshots
About Velocate GPS
Using the velocate app, you can operate all products of the velocate series (vc|one and vc|universal as well as vc|mini) intuitively and conveniently.
The device can be activated directly via the app or the Velocate website.
If velocate is activated, you will be informed immediately by an alarm on the smartphone when the tracker is moved. You can then track the position of your bike/vehicle live in real time and take countermeasures.
For vc|one
If the thief brings the bike into a cellar where there is no GPS reception - no problem. The integrated localisation module makes it possible to find the bike (e.g. in a cellar) within a radius of up to 50m. As soon as your mobile phone reaches the radius of velocate localization, you can also start an acoustic and visual alarm to make locating even easier and at the same time provide proof of your ownership).
vc|universal
Our newly developed and fully certified system for safe vehicle location. Specially developed for the requirements of the camping/caravaning sector, the Universal with its long standby time of several months is also perfect for vintage cars, boats (*special version). Fitted as standard in all Tabbert brand caravans
velocate is equipped ex works with best coverage (= books itself into virtually every network) industrial SIMs from Telekom and Vodafone and a data tariff valid throughout Europe.
Key Features:
+ App for operating all devices of the velocate series
+ Combination of taillight and GPS tracking system (vc|one)
+ Easy to mount on any bicycle with luggage carrier
+ not to be discovered thanks to integration in series rear light (vc|one)
+ automatic charging on dynamo or e-bike battery
+ up to 6 months independence from the power grid thanks to sophisticated power-saving mechanisms (vc | universal)
+ Active alarm on the smartphone, by email and optionally also by phone call
+ configured in less than one minute by app
+ integrated positioning function (vc|universal, vc|one)
+ incl. Europe-wide data tariff (e.g. on holiday)
+ integrated digital profile for uncomplicated forwarding
Follow us on Facebook:
www.facebook.com/velocategps
https://velocate.com
The device can be activated directly via the app or the Velocate website.
If velocate is activated, you will be informed immediately by an alarm on the smartphone when the tracker is moved. You can then track the position of your bike/vehicle live in real time and take countermeasures.
For vc|one
If the thief brings the bike into a cellar where there is no GPS reception - no problem. The integrated localisation module makes it possible to find the bike (e.g. in a cellar) within a radius of up to 50m. As soon as your mobile phone reaches the radius of velocate localization, you can also start an acoustic and visual alarm to make locating even easier and at the same time provide proof of your ownership).
vc|universal
Our newly developed and fully certified system for safe vehicle location. Specially developed for the requirements of the camping/caravaning sector, the Universal with its long standby time of several months is also perfect for vintage cars, boats (*special version). Fitted as standard in all Tabbert brand caravans
velocate is equipped ex works with best coverage (= books itself into virtually every network) industrial SIMs from Telekom and Vodafone and a data tariff valid throughout Europe.
Key Features:
+ App for operating all devices of the velocate series
+ Combination of taillight and GPS tracking system (vc|one)
+ Easy to mount on any bicycle with luggage carrier
+ not to be discovered thanks to integration in series rear light (vc|one)
+ automatic charging on dynamo or e-bike battery
+ up to 6 months independence from the power grid thanks to sophisticated power-saving mechanisms (vc | universal)
+ Active alarm on the smartphone, by email and optionally also by phone call
+ configured in less than one minute by app
+ integrated positioning function (vc|universal, vc|one)
+ incl. Europe-wide data tariff (e.g. on holiday)
+ integrated digital profile for uncomplicated forwarding
Follow us on Facebook:
www.facebook.com/velocategps
https://velocate.com
Show More
What's New in the Latest Version 1.9.6
Last updated on Nov 10, 2020
Old Versions
Our developers have worked hard over the past months to make the velocate platform even simpler and more powerful. The result of this work are updates for all our current products.
#new in 1.9.5. vc|vinder push notifications
# New remote
The most important thing of this update series is that we made bluetooth completely optional. This means that all devices can be remote controlled directly via the app. It doesn't matter if you are connected via Bluetooth or not. From now on every aspect of a tracker can be controlled via my.velocate.com or our app. The changes are transferred automatically as soon as your device moves or it automatically connects to our server every 12 hours. If the device is currently recording positions or is online for some other reason, the settings are even transmitted immediately.
Bluetooth will continue to play a role in vc|one proximity localization in the future.
# New operating modes
The increasing number of users in our system has taught us that our users have a wide variety of usecases for their devices. For this reason we have added 2 new modes to our **vc|one** and **vc|universal,** in addition to the current "alarm mode".
With our new firmware updates you can even switch between these modes while tracking.
Permanent Tracking Mode
One of these modes is the "Continuous Tracking Mode". This will record all movements of a tracker without triggering an alarm. This is a very powerful feature, especially in connection with our Geofences, which can be used to check in real time if a certain area is left.
Power Saving Mode
Parallel to the continuous tracking mode there is the new "energy saving mode" in which all trackers have the lowest power consumption. In this mode the tracker will only transmit its last position to our servers after a 2 minute stand still period. This has the advantage that you always know where the device has been parked without consuming a lot of power. We recommend this mode to anyone who doesn't need real-time tracking because it maximizes battery life.
# vc|one
The **vc|one** got a lot of love with this update. The new firmware finally works with our newly developed communication protocol, which uses less power although it is more communicative than before. This way we guarantee that all your settings will be played reliably on your device even from a distance. In addition, we've added the ability to request positions from the device. Completely free of charge. (The return of the position can take up to 12 hours.)
# vc|universal
After this update, vc|universal, like vc|one, will be able to benefit from the new continuous tracking mode and overwrite all existing settings completely without Bluetooth.
# vc|mini
We have extended the control of the vc|mini by adding a new alarm mode that can be used with all operating modes. So the user can choose in which mode an alarm should be triggered. This allows you to set whether the tracker should save power or record more positions.
# Portal
Our portal has received a fresh coat of paint and is now even more powerful than before.
We've paid special attention to putting the tracker's positions in the foreground and making the settings clearer and easier to define.
The platform can be found at: https://my.velocate.com
# Updates
To take advantage of these new features, the velocate app needs to be updated and the tracker's alarm mode needs to be deactivated in order to install the new firmware updates.
The current firmware versions are as follows:
- vc|one: 11.2.77
- vc|universal: 12.2.77
#new in 1.9.5. vc|vinder push notifications
# New remote
The most important thing of this update series is that we made bluetooth completely optional. This means that all devices can be remote controlled directly via the app. It doesn't matter if you are connected via Bluetooth or not. From now on every aspect of a tracker can be controlled via my.velocate.com or our app. The changes are transferred automatically as soon as your device moves or it automatically connects to our server every 12 hours. If the device is currently recording positions or is online for some other reason, the settings are even transmitted immediately.
Bluetooth will continue to play a role in vc|one proximity localization in the future.
# New operating modes
The increasing number of users in our system has taught us that our users have a wide variety of usecases for their devices. For this reason we have added 2 new modes to our **vc|one** and **vc|universal,** in addition to the current "alarm mode".
With our new firmware updates you can even switch between these modes while tracking.
Permanent Tracking Mode
One of these modes is the "Continuous Tracking Mode". This will record all movements of a tracker without triggering an alarm. This is a very powerful feature, especially in connection with our Geofences, which can be used to check in real time if a certain area is left.
Power Saving Mode
Parallel to the continuous tracking mode there is the new "energy saving mode" in which all trackers have the lowest power consumption. In this mode the tracker will only transmit its last position to our servers after a 2 minute stand still period. This has the advantage that you always know where the device has been parked without consuming a lot of power. We recommend this mode to anyone who doesn't need real-time tracking because it maximizes battery life.
# vc|one
The **vc|one** got a lot of love with this update. The new firmware finally works with our newly developed communication protocol, which uses less power although it is more communicative than before. This way we guarantee that all your settings will be played reliably on your device even from a distance. In addition, we've added the ability to request positions from the device. Completely free of charge. (The return of the position can take up to 12 hours.)
# vc|universal
After this update, vc|universal, like vc|one, will be able to benefit from the new continuous tracking mode and overwrite all existing settings completely without Bluetooth.
# vc|mini
We have extended the control of the vc|mini by adding a new alarm mode that can be used with all operating modes. So the user can choose in which mode an alarm should be triggered. This allows you to set whether the tracker should save power or record more positions.
# Portal
Our portal has received a fresh coat of paint and is now even more powerful than before.
We've paid special attention to putting the tracker's positions in the foreground and making the settings clearer and easier to define.
The platform can be found at: https://my.velocate.com
# Updates
To take advantage of these new features, the velocate app needs to be updated and the tracker's alarm mode needs to be deactivated in order to install the new firmware updates.
The current firmware versions are as follows:
- vc|one: 11.2.77
- vc|universal: 12.2.77
Show More
Version History
1.9.6
Nov 10, 2020
Our developers have worked hard over the past months to make the velocate platform even simpler and more powerful. The result of this work are updates for all our current products.
#new in 1.9.5. vc|vinder push notifications
# New remote
The most important thing of this update series is that we made bluetooth completely optional. This means that all devices can be remote controlled directly via the app. It doesn't matter if you are connected via Bluetooth or not. From now on every aspect of a tracker can be controlled via my.velocate.com or our app. The changes are transferred automatically as soon as your device moves or it automatically connects to our server every 12 hours. If the device is currently recording positions or is online for some other reason, the settings are even transmitted immediately.
Bluetooth will continue to play a role in vc|one proximity localization in the future.
# New operating modes
The increasing number of users in our system has taught us that our users have a wide variety of usecases for their devices. For this reason we have added 2 new modes to our **vc|one** and **vc|universal,** in addition to the current "alarm mode".
With our new firmware updates you can even switch between these modes while tracking.
Permanent Tracking Mode
One of these modes is the "Continuous Tracking Mode". This will record all movements of a tracker without triggering an alarm. This is a very powerful feature, especially in connection with our Geofences, which can be used to check in real time if a certain area is left.
Power Saving Mode
Parallel to the continuous tracking mode there is the new "energy saving mode" in which all trackers have the lowest power consumption. In this mode the tracker will only transmit its last position to our servers after a 2 minute stand still period. This has the advantage that you always know where the device has been parked without consuming a lot of power. We recommend this mode to anyone who doesn't need real-time tracking because it maximizes battery life.
# vc|one
The **vc|one** got a lot of love with this update. The new firmware finally works with our newly developed communication protocol, which uses less power although it is more communicative than before. This way we guarantee that all your settings will be played reliably on your device even from a distance. In addition, we've added the ability to request positions from the device. Completely free of charge. (The return of the position can take up to 12 hours.)
# vc|universal
After this update, vc|universal, like vc|one, will be able to benefit from the new continuous tracking mode and overwrite all existing settings completely without Bluetooth.
# vc|mini
We have extended the control of the vc|mini by adding a new alarm mode that can be used with all operating modes. So the user can choose in which mode an alarm should be triggered. This allows you to set whether the tracker should save power or record more positions.
# Portal
Our portal has received a fresh coat of paint and is now even more powerful than before.
We've paid special attention to putting the tracker's positions in the foreground and making the settings clearer and easier to define.
The platform can be found at: https://my.velocate.com
# Updates
To take advantage of these new features, the velocate app needs to be updated and the tracker's alarm mode needs to be deactivated in order to install the new firmware updates.
The current firmware versions are as follows:
- vc|one: 11.2.77
- vc|universal: 12.2.77
#new in 1.9.5. vc|vinder push notifications
# New remote
The most important thing of this update series is that we made bluetooth completely optional. This means that all devices can be remote controlled directly via the app. It doesn't matter if you are connected via Bluetooth or not. From now on every aspect of a tracker can be controlled via my.velocate.com or our app. The changes are transferred automatically as soon as your device moves or it automatically connects to our server every 12 hours. If the device is currently recording positions or is online for some other reason, the settings are even transmitted immediately.
Bluetooth will continue to play a role in vc|one proximity localization in the future.
# New operating modes
The increasing number of users in our system has taught us that our users have a wide variety of usecases for their devices. For this reason we have added 2 new modes to our **vc|one** and **vc|universal,** in addition to the current "alarm mode".
With our new firmware updates you can even switch between these modes while tracking.
Permanent Tracking Mode
One of these modes is the "Continuous Tracking Mode". This will record all movements of a tracker without triggering an alarm. This is a very powerful feature, especially in connection with our Geofences, which can be used to check in real time if a certain area is left.
Power Saving Mode
Parallel to the continuous tracking mode there is the new "energy saving mode" in which all trackers have the lowest power consumption. In this mode the tracker will only transmit its last position to our servers after a 2 minute stand still period. This has the advantage that you always know where the device has been parked without consuming a lot of power. We recommend this mode to anyone who doesn't need real-time tracking because it maximizes battery life.
# vc|one
The **vc|one** got a lot of love with this update. The new firmware finally works with our newly developed communication protocol, which uses less power although it is more communicative than before. This way we guarantee that all your settings will be played reliably on your device even from a distance. In addition, we've added the ability to request positions from the device. Completely free of charge. (The return of the position can take up to 12 hours.)
# vc|universal
After this update, vc|universal, like vc|one, will be able to benefit from the new continuous tracking mode and overwrite all existing settings completely without Bluetooth.
# vc|mini
We have extended the control of the vc|mini by adding a new alarm mode that can be used with all operating modes. So the user can choose in which mode an alarm should be triggered. This allows you to set whether the tracker should save power or record more positions.
# Portal
Our portal has received a fresh coat of paint and is now even more powerful than before.
We've paid special attention to putting the tracker's positions in the foreground and making the settings clearer and easier to define.
The platform can be found at: https://my.velocate.com
# Updates
To take advantage of these new features, the velocate app needs to be updated and the tracker's alarm mode needs to be deactivated in order to install the new firmware updates.
The current firmware versions are as follows:
- vc|one: 11.2.77
- vc|universal: 12.2.77
1.9.5
Feb 4, 2020
Our developers have worked hard over the past months to make the velocate platform even simpler and more powerful. The result of this work are updates for all our current products.
#new in 1.9.5. vc|vinder push notifications
# New remote
The most important thing of this update series is that we made bluetooth completely optional. This means that all devices can be remote controlled directly via the app. It doesn't matter if you are connected via Bluetooth or not. From now on every aspect of a tracker can be controlled via my.velocate.com or our app. The changes are transferred automatically as soon as your device moves or it automatically connects to our server every 12 hours. If the device is currently recording positions or is online for some other reason, the settings are even transmitted immediately.
Bluetooth will continue to play a role in vc|one proximity localization in the future.
# New operating modes
The increasing number of users in our system has taught us that our users have a wide variety of usecases for their devices. For this reason we have added 2 new modes to our **vc|one** and **vc|universal,** in addition to the current "alarm mode".
With our new firmware updates you can even switch between these modes while tracking.
Permanent Tracking Mode
One of these modes is the "Continuous Tracking Mode". This will record all movements of a tracker without triggering an alarm. This is a very powerful feature, especially in connection with our Geofences, which can be used to check in real time if a certain area is left.
Power Saving Mode
Parallel to the continuous tracking mode there is the new "energy saving mode" in which all trackers have the lowest power consumption. In this mode the tracker will only transmit its last position to our servers after a 2 minute stand still period. This has the advantage that you always know where the device has been parked without consuming a lot of power. We recommend this mode to anyone who doesn't need real-time tracking because it maximizes battery life.
# vc|one
The **vc|one** got a lot of love with this update. The new firmware finally works with our newly developed communication protocol, which uses less power although it is more communicative than before. This way we guarantee that all your settings will be played reliably on your device even from a distance. In addition, we've added the ability to request positions from the device. Completely free of charge. (The return of the position can take up to 12 hours.)
# vc|universal
After this update, vc|universal, like vc|one, will be able to benefit from the new continuous tracking mode and overwrite all existing settings completely without Bluetooth.
# vc|mini
We have extended the control of the vc|mini by adding a new alarm mode that can be used with all operating modes. So the user can choose in which mode an alarm should be triggered. This allows you to set whether the tracker should save power or record more positions.
# Portal
Our portal has received a fresh coat of paint and is now even more powerful than before.
We've paid special attention to putting the tracker's positions in the foreground and making the settings clearer and easier to define.
The platform can be found at: https://my.velocate.com
# Updates
To take advantage of these new features, the velocate app needs to be updated and the tracker's alarm mode needs to be deactivated in order to install the new firmware updates.
The current firmware versions are as follows:
- vc|one: 11.2.77
- vc|universal: 12.2.77
#new in 1.9.5. vc|vinder push notifications
# New remote
The most important thing of this update series is that we made bluetooth completely optional. This means that all devices can be remote controlled directly via the app. It doesn't matter if you are connected via Bluetooth or not. From now on every aspect of a tracker can be controlled via my.velocate.com or our app. The changes are transferred automatically as soon as your device moves or it automatically connects to our server every 12 hours. If the device is currently recording positions or is online for some other reason, the settings are even transmitted immediately.
Bluetooth will continue to play a role in vc|one proximity localization in the future.
# New operating modes
The increasing number of users in our system has taught us that our users have a wide variety of usecases for their devices. For this reason we have added 2 new modes to our **vc|one** and **vc|universal,** in addition to the current "alarm mode".
With our new firmware updates you can even switch between these modes while tracking.
Permanent Tracking Mode
One of these modes is the "Continuous Tracking Mode". This will record all movements of a tracker without triggering an alarm. This is a very powerful feature, especially in connection with our Geofences, which can be used to check in real time if a certain area is left.
Power Saving Mode
Parallel to the continuous tracking mode there is the new "energy saving mode" in which all trackers have the lowest power consumption. In this mode the tracker will only transmit its last position to our servers after a 2 minute stand still period. This has the advantage that you always know where the device has been parked without consuming a lot of power. We recommend this mode to anyone who doesn't need real-time tracking because it maximizes battery life.
# vc|one
The **vc|one** got a lot of love with this update. The new firmware finally works with our newly developed communication protocol, which uses less power although it is more communicative than before. This way we guarantee that all your settings will be played reliably on your device even from a distance. In addition, we've added the ability to request positions from the device. Completely free of charge. (The return of the position can take up to 12 hours.)
# vc|universal
After this update, vc|universal, like vc|one, will be able to benefit from the new continuous tracking mode and overwrite all existing settings completely without Bluetooth.
# vc|mini
We have extended the control of the vc|mini by adding a new alarm mode that can be used with all operating modes. So the user can choose in which mode an alarm should be triggered. This allows you to set whether the tracker should save power or record more positions.
# Portal
Our portal has received a fresh coat of paint and is now even more powerful than before.
We've paid special attention to putting the tracker's positions in the foreground and making the settings clearer and easier to define.
The platform can be found at: https://my.velocate.com
# Updates
To take advantage of these new features, the velocate app needs to be updated and the tracker's alarm mode needs to be deactivated in order to install the new firmware updates.
The current firmware versions are as follows:
- vc|one: 11.2.77
- vc|universal: 12.2.77
1.9.4
Jan 2, 2020
Our developers have worked hard over the past months to make the velocate platform even simpler and more powerful. The result of this work are updates for all our current products.
# New remote
The most important thing of this update series is that we made bluetooth completely optional. This means that all devices can be remote controlled directly via the app. It doesn't matter if you are connected via Bluetooth or not. From now on every aspect of a tracker can be controlled via my.velocate.com or our app. The changes are transferred automatically as soon as your device moves or it automatically connects to our server every 12 hours. If the device is currently recording positions or is online for some other reason, the settings are even transmitted immediately.
Bluetooth will continue to play a role in vc|one proximity localization in the future.
# New operating modes
The increasing number of users in our system has taught us that our users have a wide variety of usecases for their devices. For this reason we have added 2 new modes to our **vc|one** and **vc|universal,** in addition to the current "alarm mode".
With our new firmware updates you can even switch between these modes while tracking.
Permanent Tracking Mode
One of these modes is the "Continuous Tracking Mode". This will record all movements of a tracker without triggering an alarm. This is a very powerful feature, especially in connection with our Geofences, which can be used to check in real time if a certain area is left.
Power Saving Mode
Parallel to the continuous tracking mode there is the new "energy saving mode" in which all trackers have the lowest power consumption. In this mode the tracker will only transmit its last position to our servers after a 2 minute stand still period. This has the advantage that you always know where the device has been parked without consuming a lot of power. We recommend this mode to anyone who doesn't need real-time tracking because it maximizes battery life.
# vc|one
The **vc|one** got a lot of love with this update. The new firmware finally works with our newly developed communication protocol, which uses less power although it is more communicative than before. This way we guarantee that all your settings will be played reliably on your device even from a distance. In addition, we've added the ability to request positions from the device. Completely free of charge. (The return of the position can take up to 12 hours.)
# vc|universal
After this update, vc|universal, like vc|one, will be able to benefit from the new continuous tracking mode and overwrite all existing settings completely without Bluetooth.
# vc|mini
We have extended the control of the vc|mini by adding a new alarm mode that can be used with all operating modes. So the user can choose in which mode an alarm should be triggered. This allows you to set whether the tracker should save power or record more positions.
# Portal
Our portal has received a fresh coat of paint and is now even more powerful than before.
We've paid special attention to putting the tracker's positions in the foreground and making the settings clearer and easier to define.
The platform can be found at: https://my.velocate.com
# Updates
To take advantage of these new features, the velocate app needs to be updated and the tracker's alarm mode needs to be deactivated in order to install the new firmware updates.
The current firmware versions are as follows:
- vc|one: 11.2.77
- vc|universal: 12.2.77
# New remote
The most important thing of this update series is that we made bluetooth completely optional. This means that all devices can be remote controlled directly via the app. It doesn't matter if you are connected via Bluetooth or not. From now on every aspect of a tracker can be controlled via my.velocate.com or our app. The changes are transferred automatically as soon as your device moves or it automatically connects to our server every 12 hours. If the device is currently recording positions or is online for some other reason, the settings are even transmitted immediately.
Bluetooth will continue to play a role in vc|one proximity localization in the future.
# New operating modes
The increasing number of users in our system has taught us that our users have a wide variety of usecases for their devices. For this reason we have added 2 new modes to our **vc|one** and **vc|universal,** in addition to the current "alarm mode".
With our new firmware updates you can even switch between these modes while tracking.
Permanent Tracking Mode
One of these modes is the "Continuous Tracking Mode". This will record all movements of a tracker without triggering an alarm. This is a very powerful feature, especially in connection with our Geofences, which can be used to check in real time if a certain area is left.
Power Saving Mode
Parallel to the continuous tracking mode there is the new "energy saving mode" in which all trackers have the lowest power consumption. In this mode the tracker will only transmit its last position to our servers after a 2 minute stand still period. This has the advantage that you always know where the device has been parked without consuming a lot of power. We recommend this mode to anyone who doesn't need real-time tracking because it maximizes battery life.
# vc|one
The **vc|one** got a lot of love with this update. The new firmware finally works with our newly developed communication protocol, which uses less power although it is more communicative than before. This way we guarantee that all your settings will be played reliably on your device even from a distance. In addition, we've added the ability to request positions from the device. Completely free of charge. (The return of the position can take up to 12 hours.)
# vc|universal
After this update, vc|universal, like vc|one, will be able to benefit from the new continuous tracking mode and overwrite all existing settings completely without Bluetooth.
# vc|mini
We have extended the control of the vc|mini by adding a new alarm mode that can be used with all operating modes. So the user can choose in which mode an alarm should be triggered. This allows you to set whether the tracker should save power or record more positions.
# Portal
Our portal has received a fresh coat of paint and is now even more powerful than before.
We've paid special attention to putting the tracker's positions in the foreground and making the settings clearer and easier to define.
The platform can be found at: https://my.velocate.com
# Updates
To take advantage of these new features, the velocate app needs to be updated and the tracker's alarm mode needs to be deactivated in order to install the new firmware updates.
The current firmware versions are as follows:
- vc|one: 11.2.77
- vc|universal: 12.2.77
1.9.3
Dec 16, 2019
Our developers have worked hard over the past months to make the velocate platform even simpler and more powerful. The result of this work are updates for all our current products.
# New remote
The most important thing of this update series is that we made bluetooth completely optional. This means that all devices can be remote controlled directly via the app. It doesn't matter if you are connected via Bluetooth or not. From now on every aspect of a tracker can be controlled via my.velocate.com or our app. The changes are transferred automatically as soon as your device moves or it automatically connects to our server every 12 hours. If the device is currently recording positions or is online for some other reason, the settings are even transmitted immediately.
Bluetooth will continue to play a role in vc|one proximity localization in the future.
# New operating modes
The increasing number of users in our system has taught us that our users have a wide variety of usecases for their devices. For this reason we have added 2 new modes to our **vc|one** and **vc|universal,** in addition to the current "alarm mode".
With our new firmware updates you can even switch between these modes while tracking.
Permanent Tracking Mode
One of these modes is the "Continuous Tracking Mode". This will record all movements of a tracker without triggering an alarm. This is a very powerful feature, especially in connection with our Geofences, which can be used to check in real time if a certain area is left.
Power Saving Mode
Parallel to the continuous tracking mode there is the new "energy saving mode" in which all trackers have the lowest power consumption. In this mode the tracker will only transmit its last position to our servers after a 2 minute stand still period. This has the advantage that you always know where the device has been parked without consuming a lot of power. We recommend this mode to anyone who doesn't need real-time tracking because it maximizes battery life.
# vc|one
The **vc|one** got a lot of love with this update. The new firmware finally works with our newly developed communication protocol, which uses less power although it is more communicative than before. This way we guarantee that all your settings will be played reliably on your device even from a distance. In addition, we've added the ability to request positions from the device. Completely free of charge. (The return of the position can take up to 12 hours.)
# vc|universal
After this update, vc|universal, like vc|one, will be able to benefit from the new continuous tracking mode and overwrite all existing settings completely without Bluetooth.
# vc|mini
We have extended the control of the vc|mini by adding a new alarm mode that can be used with all operating modes. So the user can choose in which mode an alarm should be triggered. This allows you to set whether the tracker should save power or record more positions.
# Portal
Our portal has received a fresh coat of paint and is now even more powerful than before.
We've paid special attention to putting the tracker's positions in the foreground and making the settings clearer and easier to define.
The platform can be found at: https://my.velocate.com
# Updates
To take advantage of these new features, the velocate app needs to be updated and the tracker's alarm mode needs to be deactivated in order to install the new firmware updates.
The current firmware versions are as follows:
- vc|one: 11.2.77
- vc|universal: 12.2.77
# New remote
The most important thing of this update series is that we made bluetooth completely optional. This means that all devices can be remote controlled directly via the app. It doesn't matter if you are connected via Bluetooth or not. From now on every aspect of a tracker can be controlled via my.velocate.com or our app. The changes are transferred automatically as soon as your device moves or it automatically connects to our server every 12 hours. If the device is currently recording positions or is online for some other reason, the settings are even transmitted immediately.
Bluetooth will continue to play a role in vc|one proximity localization in the future.
# New operating modes
The increasing number of users in our system has taught us that our users have a wide variety of usecases for their devices. For this reason we have added 2 new modes to our **vc|one** and **vc|universal,** in addition to the current "alarm mode".
With our new firmware updates you can even switch between these modes while tracking.
Permanent Tracking Mode
One of these modes is the "Continuous Tracking Mode". This will record all movements of a tracker without triggering an alarm. This is a very powerful feature, especially in connection with our Geofences, which can be used to check in real time if a certain area is left.
Power Saving Mode
Parallel to the continuous tracking mode there is the new "energy saving mode" in which all trackers have the lowest power consumption. In this mode the tracker will only transmit its last position to our servers after a 2 minute stand still period. This has the advantage that you always know where the device has been parked without consuming a lot of power. We recommend this mode to anyone who doesn't need real-time tracking because it maximizes battery life.
# vc|one
The **vc|one** got a lot of love with this update. The new firmware finally works with our newly developed communication protocol, which uses less power although it is more communicative than before. This way we guarantee that all your settings will be played reliably on your device even from a distance. In addition, we've added the ability to request positions from the device. Completely free of charge. (The return of the position can take up to 12 hours.)
# vc|universal
After this update, vc|universal, like vc|one, will be able to benefit from the new continuous tracking mode and overwrite all existing settings completely without Bluetooth.
# vc|mini
We have extended the control of the vc|mini by adding a new alarm mode that can be used with all operating modes. So the user can choose in which mode an alarm should be triggered. This allows you to set whether the tracker should save power or record more positions.
# Portal
Our portal has received a fresh coat of paint and is now even more powerful than before.
We've paid special attention to putting the tracker's positions in the foreground and making the settings clearer and easier to define.
The platform can be found at: https://my.velocate.com
# Updates
To take advantage of these new features, the velocate app needs to be updated and the tracker's alarm mode needs to be deactivated in order to install the new firmware updates.
The current firmware versions are as follows:
- vc|one: 11.2.77
- vc|universal: 12.2.77
1.8.7
Jul 9, 2019
- New App-Icon and Launchscreen
- Optimizations for new iPhone models
- Various improvements and bug fixes
- Optimizations for new iPhone models
- Various improvements and bug fixes
1.8.6
May 30, 2019
Introduction of new communication protocol for vc|universal
Preparations for Release 2.0
New devices:
vc|mini
vc|universal
Preparations for Release 2.0
New devices:
vc|mini
vc|universal
1.7.16
Sep 6, 2018
- Improved synchronization of device settings between app and portal
- Bugfixes (BLE etc)
- Small Design Tweaks
- Preparations for the new major release in autumn 2018
- Bugfixes (BLE etc)
- Small Design Tweaks
- Preparations for the new major release in autumn 2018
1.7.12
Jan 22, 2018
Minor Bugfixes (Icon Cache & Login-Password fix)
Migration to our new velocate Portal 2.0.
The update and migration are very easy to perform:
Simply install this app or start the migration after logging in via https://my.velocate.com
After moving it is mandatory to update your vc|one (s) to 11.2.53
VC ZERO OWNER!!!!! PLEASE DO NOT UPDATE!
vc|zeros with Firmware <3.2.xx will not be migrated and can still be used via https://portal.velocate.com or the upcoming App Velocate for vc|zero ".
Migration to our new velocate Portal 2.0.
The update and migration are very easy to perform:
Simply install this app or start the migration after logging in via https://my.velocate.com
After moving it is mandatory to update your vc|one (s) to 11.2.53
VC ZERO OWNER!!!!! PLEASE DO NOT UPDATE!
vc|zeros with Firmware <3.2.xx will not be migrated and can still be used via https://portal.velocate.com or the upcoming App Velocate for vc|zero ".
1.7.10
Jan 16, 2018
IMPORTANT INFO VC ZERO USERS! PLEASE READ FURTHER BELOW!
We are moving to our new velocate portal 2.0, which is much more powerful.
The update and migration are very easy to perform:
Simply install this app or start the migration after logging in via https://my.velocate.com
After moving it is necessary to update all firmware of your vc|one (s) to 11.2.53
Firmware installation:
Requirements: Alarm mode off, min. 40% battery life, min. 25-30% GSM reception
Procedure: Connect via Bluetooth and search for firmware
VC ZERO OWNERS!!!!! PLEASE DO NOT UPDATE!
vc|zeros will not be migrated and must still be used via https://portal.velocate.com or the upcoming App Velocate for vc|zero ".
Users of vc|zero are therefore advised to wait for the latest update.
We are moving to our new velocate portal 2.0, which is much more powerful.
The update and migration are very easy to perform:
Simply install this app or start the migration after logging in via https://my.velocate.com
After moving it is necessary to update all firmware of your vc|one (s) to 11.2.53
Firmware installation:
Requirements: Alarm mode off, min. 40% battery life, min. 25-30% GSM reception
Procedure: Connect via Bluetooth and search for firmware
VC ZERO OWNERS!!!!! PLEASE DO NOT UPDATE!
vc|zeros will not be migrated and must still be used via https://portal.velocate.com or the upcoming App Velocate for vc|zero ".
Users of vc|zero are therefore advised to wait for the latest update.
1.6.12
Oct 4, 2017
- Preparation vc|universal
- Introduction Stop-Modus (Beta) - transmit one position after 2 minutes
- Optimization E-Bike-mode. Device can be charged now in alarm mode without triggering the alarm automatically
- new text when switching off the device
- Introduction Stop-Modus (Beta) - transmit one position after 2 minutes
- Optimization E-Bike-mode. Device can be charged now in alarm mode without triggering the alarm automatically
- new text when switching off the device
1.6.6
Jul 12, 2017
Bugfix: Beim Velocate Hinzufügen wurde die Liste der gefunden Geräte nicht richtig aktualisiert. (Seit der Testversion 1.6.4)
Bugfix: „Niedrige“ Empfindlichkeit Rechtschreibfehler beseitig
Änderung: Titelname der Details-/Einstellungs-Seite zeigt nun den ausgewählten Gerätename an
Bugfix: „Niedrige“ Empfindlichkeit Rechtschreibfehler beseitig
Änderung: Titelname der Details-/Einstellungs-Seite zeigt nun den ausgewählten Gerätename an
1.6.2
Jun 22, 2017
- Fehlerkorrekturen
1.6.0
Jun 15, 2017
- E-Bike Modus - Entfall der Standlichtfunktion bei E-Bikes - wenn die Stromzufuhr deaktiviert wird, geht das Licht sofort aus (Voraussetzung: mind. FW 1.0.41)
- BETA-TEST: Automatische Aktivierung des Alarms - wenn iPhone in der Nähe, wird der Alarmmodus deaktiviert - bei Entfernen wird der Alarm automatisch aktiviert (Voraussetzung: mind. FW: 1.0.45)
Funktioniert aktuell zuverlässig bei Betrieb von einem vc|one. Bei mehreren Geräten wird das nächste Gerät in BT-Sichtweite jeweils unterdrückt. Feedback zu dieser Funktion bitte an support@velocate.com
- Integration des digitalen Fahrradpasses
- Korrektur URL beim ersten Aufruf des Tutorials
- Accounts werden sofort freigeschaltet - Bestätigungsmail entfällt
- Wegfall der Option "nach 1 Tag abschalten" - obsolet
- BETA-TEST: Automatische Aktivierung des Alarms - wenn iPhone in der Nähe, wird der Alarmmodus deaktiviert - bei Entfernen wird der Alarm automatisch aktiviert (Voraussetzung: mind. FW: 1.0.45)
Funktioniert aktuell zuverlässig bei Betrieb von einem vc|one. Bei mehreren Geräten wird das nächste Gerät in BT-Sichtweite jeweils unterdrückt. Feedback zu dieser Funktion bitte an support@velocate.com
- Integration des digitalen Fahrradpasses
- Korrektur URL beim ersten Aufruf des Tutorials
- Accounts werden sofort freigeschaltet - Bestätigungsmail entfällt
- Wegfall der Option "nach 1 Tag abschalten" - obsolet
1.48
Oct 7, 2016
- Laute Alarmtöne (Systemton + 3 laute Sirenen) auswählbar in den allgemeinen Einstellungen
- sofortige Aktivierung der velocate-Geräte aus der App
- diverse Bugfixes
- sofortige Aktivierung der velocate-Geräte aus der App
- diverse Bugfixes
1.0.1
Jul 26, 2016
- Bugfixes bei PIN-Änderung von einem anderen Gerät
- Expertenmodus entfernt (Einstellungen immer komplett sichtbar)
- Sofortige SIM-Aktivierung über Ein-Klick-Aktivierung
- BT-PIN bei Änderung mit dem Server synchronisieren
- Niederländische Übersetzung hinzugefügt
- Sonstige Bugfixes
- Alarmmodus umbenannt
- Expertenmodus entfernt (Einstellungen immer komplett sichtbar)
- Sofortige SIM-Aktivierung über Ein-Klick-Aktivierung
- BT-PIN bei Änderung mit dem Server synchronisieren
- Niederländische Übersetzung hinzugefügt
- Sonstige Bugfixes
- Alarmmodus umbenannt
1.0
Jun 7, 2016
Velocate GPS FAQ
Click here to learn how to download Velocate GPS in restricted country or region.
Check the following list to see the minimum requirements of Velocate GPS.
iPhone
Requires iOS 12.0 or later.
iPad
Requires iPadOS 12.0 or later.
iPod touch
Requires iOS 12.0 or later.
Velocate GPS supports English, Dutch, German
