Drag Racing Timing: DragRacing
Drag racing timing on road!
FreeOffers In-App Purchases
2.2.1for iPhone, iPad
Age Rating
Drag Racing Timing: DragRacing Screenshots
About Drag Racing Timing: DragRacing
DragRacing is an app that measures times in a drag racing machine on road without measurement facilities.
The app measures times with GPS at 60 feet, 330 feet, 660 feet, 1000 feet, 1/4 mile and 1/2 mile.
It is a very useful app for test run or training of drag racing!
Please use it with safety first. Please comply with the law when using it on public roads.
(How to use)
1. Fix the iPhone (or iPad with GPS) with DragRacing installed on the dashboard of your car so that it does not sway. If your iPhone doesn't fall while accelerating, you can just put it on the dashboard or center console.
2. Tap the Start button (or Start / Repeat button). If the car is stopping, “In Prep" is displayed, and if the car is moving or the device isn’t capturing GPS signal, "Waiting for Stop" is displayed. (If the device isn’t capturing GPS signal, "GPS" mark to the left of the DragRacing logo shows in thin gray.)
3. When the message “Start at your timing / Ready" Is displayed, start at your own timing. You will be notified by sound at the same time as the display. When your car starts, measurement starts and "Measurement Started" is displayed. The screen becomes a green image during measurement.
4. If your car decelerate during measurement, the measurement will finish and "Finished" will be displayed.
5. If the Start / Repeat button was tapped, when the speed drops near a stop, "Waiting for Stop" is displayed to prepare for the next measurement.
(Button function)
Stop: The measurement will end immediately.
Start: Makes the measurement only once.
Start Repeat: Repeats the measurement. It is convenient for repeated measurement in urban areas where there are many signals.
share: A window opens to share the displayed result.
▲newer: After displaying the past result with ▼older button, tap this button to return to the newer results.
▼older: Displays past results from the stored history.
km/h / mph: Selects the unit of speed
(Measurement item)
- Timing at 60 feet and 330 feet
- Timing and speed at 660 feet, 1000 feet, 1/4 mile and 1/2 mile*
- Timing at 60 mph and 100 km/h*
- Max speed
(* Functionality expansion in-app purchase)
(Large speed display on the screen)
You can turn it on and off by tapping the Stop button twice in the stopping state (when neither the Start button nor the Start / Repeat button is tapped).
(Sensitivity setting of start sensing)
In the stopping state, tap buttons “Stop → ▲newer → ▼older → ▲newer → ▲newer" to open the setting window at the top of the screen. You can select 5 levels of sensitivity. Adjust if there are many false start sensing or if the response is slow. Probably no adjustment is necessary.
(Note)
- 1000 cases of measurement history are stored.
- When you uninstall and reinstall DragRacing, the stored measurement history will be deleted.
- Dark mode compatible.
- No advertisement in the app.
- The app does not work on iPads without GPS.
- If the GPS signal is weak, the operation may become unstable.
- The developer assumes no responsibility for any accident, violation, loss or claims by third parties which may arise from the use of this app.
The app measures times with GPS at 60 feet, 330 feet, 660 feet, 1000 feet, 1/4 mile and 1/2 mile.
It is a very useful app for test run or training of drag racing!
Please use it with safety first. Please comply with the law when using it on public roads.
(How to use)
1. Fix the iPhone (or iPad with GPS) with DragRacing installed on the dashboard of your car so that it does not sway. If your iPhone doesn't fall while accelerating, you can just put it on the dashboard or center console.
2. Tap the Start button (or Start / Repeat button). If the car is stopping, “In Prep" is displayed, and if the car is moving or the device isn’t capturing GPS signal, "Waiting for Stop" is displayed. (If the device isn’t capturing GPS signal, "GPS" mark to the left of the DragRacing logo shows in thin gray.)
3. When the message “Start at your timing / Ready" Is displayed, start at your own timing. You will be notified by sound at the same time as the display. When your car starts, measurement starts and "Measurement Started" is displayed. The screen becomes a green image during measurement.
4. If your car decelerate during measurement, the measurement will finish and "Finished" will be displayed.
5. If the Start / Repeat button was tapped, when the speed drops near a stop, "Waiting for Stop" is displayed to prepare for the next measurement.
(Button function)
Stop: The measurement will end immediately.
Start: Makes the measurement only once.
Start Repeat: Repeats the measurement. It is convenient for repeated measurement in urban areas where there are many signals.
share: A window opens to share the displayed result.
▲newer: After displaying the past result with ▼older button, tap this button to return to the newer results.
▼older: Displays past results from the stored history.
km/h / mph: Selects the unit of speed
(Measurement item)
- Timing at 60 feet and 330 feet
- Timing and speed at 660 feet, 1000 feet, 1/4 mile and 1/2 mile*
- Timing at 60 mph and 100 km/h*
- Max speed
(* Functionality expansion in-app purchase)
(Large speed display on the screen)
You can turn it on and off by tapping the Stop button twice in the stopping state (when neither the Start button nor the Start / Repeat button is tapped).
(Sensitivity setting of start sensing)
In the stopping state, tap buttons “Stop → ▲newer → ▼older → ▲newer → ▲newer" to open the setting window at the top of the screen. You can select 5 levels of sensitivity. Adjust if there are many false start sensing or if the response is slow. Probably no adjustment is necessary.
(Note)
- 1000 cases of measurement history are stored.
- When you uninstall and reinstall DragRacing, the stored measurement history will be deleted.
- Dark mode compatible.
- No advertisement in the app.
- The app does not work on iPads without GPS.
- If the GPS signal is weak, the operation may become unstable.
- The developer assumes no responsibility for any accident, violation, loss or claims by third parties which may arise from the use of this app.
Show More
What's New in the Latest Version 2.2.1
Last updated on Sep 6, 2024
Old Versions
To prevent accidental termination of measurement, a confirmation dialog will appear when you tap "Stop" button during measurement.
Other improvements.
Other improvements.
Show More
Version History
2.2.1
Sep 6, 2024
To prevent accidental termination of measurement, a confirmation dialog will appear when you tap "Stop" button during measurement.
Other improvements.
Other improvements.
2.2.0
Jul 9, 2024
The sharing function has been improved.
2.1.2
May 7, 2024
Fixed a minor bug and improved performances.
2.1.1
Feb 23, 2024
Fixed a minor bug and improved performances.
2.1.0
Feb 10, 2024
Changed the ready state message.
Other improvements.
Other improvements.
2.0.2
Dec 15, 2023
Fixed a minor bug and improved performances.
2.0.1
Apr 24, 2023
Improved battery consumption when in the background without measurement.
2.0.0
Apr 11, 2023
Allowed to work in the background.
Changed to black screen design even in light mode.
Fixed minor bugs.
Changed to black screen design even in light mode.
Fixed minor bugs.
1.5.3
Jan 12, 2023
Fixed a minor bug and improved performances.
1.5.2
Dec 12, 2022
Fixed a minor bug and improved performances.
1.5.1
Nov 13, 2022
Fixed that sharing function by share button may not work properly on iPad.
1.5.0
Nov 8, 2022
"copy" button has been changed to the "share" button to make it easier to share the measurement results and improve convenience.
Changed the button operation to open the setting window for sensitivity setting of start sensing to "Stop → ▲newer → ▼older → ▲newer → ▲newer”.
Other improvements.
Changed the button operation to open the setting window for sensitivity setting of start sensing to "Stop → ▲newer → ▼older → ▲newer → ▲newer”.
Other improvements.
1.4.1
Oct 21, 2022
Fixed a minor bug and improved performances.
1.4.0
Oct 8, 2022
Improved status messages.
Other improvements.
Other improvements.
1.3.3
Jul 12, 2022
Fixed a minor bug and improved performances.
1.3.2
Feb 17, 2022
Modified splash screen.
Other improvements.
Other improvements.
1.3.1
Dec 21, 2021
Introduced a splash screen.
Other improvements.
Other improvements.
1.3.0
Dec 19, 2021
Introduced subscription.
Introduced a splash screen.
Other improvements.
Introduced a splash screen.
Other improvements.
1.2.0
Oct 5, 2021
Modified the routine for “Ready”. (For motorcycles, etc. with large vibration)
Other improvements.
Other improvements.
1.1.1
Sep 4, 2021
Fixed a bug that speed and message were not displayed properly on some models.
1.1.0
Aug 29, 2021
In Start/Repeat mode, the process to show "Waiting for Stop" in preparation for the next measurement has been changed.
1.0.1
Aug 19, 2021
Fixed the date in the history display.
1.0.0
Aug 17, 2021
Drag Racing Timing: DragRacing FAQ
Drag Racing Timing: DragRacing is available in regions other than the following restricted countries:
Belarus,South Korea,Russia
Drag Racing Timing: DragRacing supports English, Japanese
Drag Racing Timing: DragRacing contains in-app purchases. Please check the pricing plan as below:
Function expansion
$5.99
Click here to learn how to download Drag Racing Timing: DragRacing in restricted country or region.
Check the following list to see the minimum requirements of Drag Racing Timing: DragRacing.
iPhone
Requires iOS 12.0 or later.
iPad
Requires iPadOS 12.0 or later.
Related Videos
Latest introduction video of Drag Racing Timing: DragRacing on iPhone