iPhantom
FreeOffers In-App Purchases
2.401for iPhone, iPod touch
Age Rating
iPhantom Screenshots
About iPhantom
iPhantom by Joe Kocsis
with Drew Lauer & Hollywood Special Ops
This App is a game changer for all Phantom Camera operators and technicians.
Wirelessly control any Phantom Camera by Vision Research through your iPhone or iOS device via a Wifi router through the camera's Ethernet port.
Breath new life into older Phantom Cameras with amazing control like never before.
From the "Record Page"
Easily access necessary functions like Record, Trigger, Black Reference, OSD, view important camera information, and quickly connect to your camera.
From the "Playback Page"
Experience incredibly agile playback functionality, set in and out points and save clips.
In the "Menu Page"
Adjust the most commonly used settings like fps, shutter angle, white balance, etc...
Send Telnet Commands from your phone via the built in Telnet Function
Never use a PC to control a Phantom again!
Download iPhantom for free to access a handful of functions and to test your connection. Unlock complete functionality through in-app purchase.
Setup is easy. There are many palm-sized Wifi routers on the market that can be powered through USB, and even some with built in battery, that can be connected to your Phantom camera through its Ethernet port. USB power can be provided by a small portable USB battery or by using an adapter cable like PTap to USB. Just connect your iOS device to that Wifi signal, open iPhantom, and click "Detect IP" then click "Connect". See the built in Quick Start Guide or www.iPhatomApp.com for more information on setup.
Visit us at www.iPhantomApp.com, where we will soon offer hardware accessories like preconfigured Wifi routers and short length Phantom to Ethernet cables.
iPhantom should work with every Phantom Camera, but has been thoroughly tested with the following cameras:
Flex4K, VEO4K, Flex2K, Miro, v10, v12.1, v2511, v2512, v642
Requirements:
A Phantom Camera by Vision Research
A Phantom Network Cable, aka Phantom to Ethernet Cable
A Wifi Router
A Power Source for Wifi Router
An iOS Device with Wifi capability
This app was not created or maintained by Vision Research.
www.iPhantomApp.com
www.HollywoodSpecialOps.com
iPhantom is a Subscription Based App
Current Offerings
1) Yearly Auto-Renewing Subscription
2) 14 Day Project License
3) 48 Project License
• Payment will be charged to iTunes Account at confirmation of purchase
• Auto Renewing Subscriptions automatically renew unless auto-renew is turned off at least 24-hours before the end of the current period
• Account will be charged for renewal within 24-hours prior to the end of the current period, and identify the cost of the renewal
• Subscriptions may be managed by the user and auto-renewal may be turned off by going to the user's Account Settings after purchase
Terms of Use
http://www.iphantomapp.com/terms-of-use/
with Drew Lauer & Hollywood Special Ops
This App is a game changer for all Phantom Camera operators and technicians.
Wirelessly control any Phantom Camera by Vision Research through your iPhone or iOS device via a Wifi router through the camera's Ethernet port.
Breath new life into older Phantom Cameras with amazing control like never before.
From the "Record Page"
Easily access necessary functions like Record, Trigger, Black Reference, OSD, view important camera information, and quickly connect to your camera.
From the "Playback Page"
Experience incredibly agile playback functionality, set in and out points and save clips.
In the "Menu Page"
Adjust the most commonly used settings like fps, shutter angle, white balance, etc...
Send Telnet Commands from your phone via the built in Telnet Function
Never use a PC to control a Phantom again!
Download iPhantom for free to access a handful of functions and to test your connection. Unlock complete functionality through in-app purchase.
Setup is easy. There are many palm-sized Wifi routers on the market that can be powered through USB, and even some with built in battery, that can be connected to your Phantom camera through its Ethernet port. USB power can be provided by a small portable USB battery or by using an adapter cable like PTap to USB. Just connect your iOS device to that Wifi signal, open iPhantom, and click "Detect IP" then click "Connect". See the built in Quick Start Guide or www.iPhatomApp.com for more information on setup.
Visit us at www.iPhantomApp.com, where we will soon offer hardware accessories like preconfigured Wifi routers and short length Phantom to Ethernet cables.
iPhantom should work with every Phantom Camera, but has been thoroughly tested with the following cameras:
Flex4K, VEO4K, Flex2K, Miro, v10, v12.1, v2511, v2512, v642
Requirements:
A Phantom Camera by Vision Research
A Phantom Network Cable, aka Phantom to Ethernet Cable
A Wifi Router
A Power Source for Wifi Router
An iOS Device with Wifi capability
This app was not created or maintained by Vision Research.
www.iPhantomApp.com
www.HollywoodSpecialOps.com
iPhantom is a Subscription Based App
Current Offerings
1) Yearly Auto-Renewing Subscription
2) 14 Day Project License
3) 48 Project License
• Payment will be charged to iTunes Account at confirmation of purchase
• Auto Renewing Subscriptions automatically renew unless auto-renew is turned off at least 24-hours before the end of the current period
• Account will be charged for renewal within 24-hours prior to the end of the current period, and identify the cost of the renewal
• Subscriptions may be managed by the user and auto-renewal may be turned off by going to the user's Account Settings after purchase
Terms of Use
http://www.iphantomapp.com/terms-of-use/
Show More
What's New in the Latest Version 2.401
Last updated on Apr 16, 2021
Old Versions
- iOS/Phone Related Updates
- Full Screen on iPhone X and Newer Phones
- Wifi Name Displayed if you give location services permission
- Misc iOS Compatibility Updates
- Playback Page
- LIVE/PLAY Buttons Combined into One Button
- Playback now resumes when switching back from Live Mode
- Playback Will Now Loop In Reverse and Forward Playback when Repeat is Enabled
- Settings
- Custom Resolution on Flex4K
- Tap Right Side of Resolution in Menu
- Full Screen on iPhone X and Newer Phones
- Wifi Name Displayed if you give location services permission
- Misc iOS Compatibility Updates
- Playback Page
- LIVE/PLAY Buttons Combined into One Button
- Playback now resumes when switching back from Live Mode
- Playback Will Now Loop In Reverse and Forward Playback when Repeat is Enabled
- Settings
- Custom Resolution on Flex4K
- Tap Right Side of Resolution in Menu
Show More
Version History
2.401
Apr 16, 2021
- iOS/Phone Related Updates
- Full Screen on iPhone X and Newer Phones
- Wifi Name Displayed if you give location services permission
- Misc iOS Compatibility Updates
- Playback Page
- LIVE/PLAY Buttons Combined into One Button
- Playback now resumes when switching back from Live Mode
- Playback Will Now Loop In Reverse and Forward Playback when Repeat is Enabled
- Settings
- Custom Resolution on Flex4K
- Tap Right Side of Resolution in Menu
- Full Screen on iPhone X and Newer Phones
- Wifi Name Displayed if you give location services permission
- Misc iOS Compatibility Updates
- Playback Page
- LIVE/PLAY Buttons Combined into One Button
- Playback now resumes when switching back from Live Mode
- Playback Will Now Loop In Reverse and Forward Playback when Repeat is Enabled
- Settings
- Custom Resolution on Flex4K
- Tap Right Side of Resolution in Menu
2.3
Sep 28, 2019
Dark Mode Fix
2.2
Sep 26, 2019
iOS 13 compatibility updates
Change FPS, Shutter, WB from Record Page
Added 3D-SDI formats for VEO4K and Flex4K
Added access for additional camera settings on Menu Page
Dual Frame Rate Mode (Quickly Toggle Between Two Saved Frame Rates)
Low Light Mode (Quickly open exposure for framing)
Video Zoom on SDI (Pixel for Pixel 1:1 zoom and other modes depending on camera model)
Custom Speed Slow and Fast Playback Modes
Auto Reconnect to Camera
Improved Playback Timeline Scrubbing
Change FPS, Shutter, WB from Record Page
Added 3D-SDI formats for VEO4K and Flex4K
Added access for additional camera settings on Menu Page
Dual Frame Rate Mode (Quickly Toggle Between Two Saved Frame Rates)
Low Light Mode (Quickly open exposure for framing)
Video Zoom on SDI (Pixel for Pixel 1:1 zoom and other modes depending on camera model)
Custom Speed Slow and Fast Playback Modes
Auto Reconnect to Camera
Improved Playback Timeline Scrubbing
2.15
Oct 28, 2018
Adds the following feature
Set Time on Connect - Auto set your clock on camera connection. Additionally useful as a work around to keep time of day set for those with a dead internal battery on their Phantom Camera.
iOS 12 compatibility fixes
Adds Links to Privacy Policy and Terms of Use
Set Time on Connect - Auto set your clock on camera connection. Additionally useful as a work around to keep time of day set for those with a dead internal battery on their Phantom Camera.
iOS 12 compatibility fixes
Adds Links to Privacy Policy and Terms of Use
2.11
May 22, 2018
Menu Page
-added Manual Shutter Close/Open
-added Production Area Offset
-Partitions now displays current number of partitions
Playback Page
-Cine Picker now selects the current playing cine in the cine-picker when a selecting cine to play.
-Playback speed will be maintained when Playback Repeat is selected and playback repeats
-Last Playback Repeat setting is saved
General Display Fixes
-When device was up side down. Some pages did not flip.
Minor Graphic Adjustments
-added Manual Shutter Close/Open
-added Production Area Offset
-Partitions now displays current number of partitions
Playback Page
-Cine Picker now selects the current playing cine in the cine-picker when a selecting cine to play.
-Playback speed will be maintained when Playback Repeat is selected and playback repeats
-Last Playback Repeat setting is saved
General Display Fixes
-When device was up side down. Some pages did not flip.
Minor Graphic Adjustments
2.1
May 21, 2018
Menu Page
-added Manual Shutter Close/Open
-added Production Area Offset
-Partitions now displays current number of partitions
Playback Page
-Cine Picker now selects the current playing cine in the cine-picker when a selecting cine to play.
-Playback speed will be maintained when Playback Repeat is selected and playback repeats
-Last Playback Repeat setting is saved
General Display Fixes
-When device was up side down. Some pages did not flip.
-added Manual Shutter Close/Open
-added Production Area Offset
-Partitions now displays current number of partitions
Playback Page
-Cine Picker now selects the current playing cine in the cine-picker when a selecting cine to play.
-Playback speed will be maintained when Playback Repeat is selected and playback repeats
-Last Playback Repeat setting is saved
General Display Fixes
-When device was up side down. Some pages did not flip.
2.0
Dec 24, 2017
New Cameras Supported
VEO4K
VEO
Updated Layout for faster workflow
- Tools Function
- Voltage Monitoring
- Wifi Connection Monitoring
- Better Connection/Disconnection Notifications
New Playback Functions including
- Skip to Next Clip (supported for both mag and ram review)
- Jump to start and end
- More Meta Info
- Variable Rate Jog Bar
- Tap to jump to point on timeline
Captures Modes
- Continuous Mode
- Auto Save
- Auto Clear
- Production Area and Center Dot Presets
VEO4K
VEO
Updated Layout for faster workflow
- Tools Function
- Voltage Monitoring
- Wifi Connection Monitoring
- Better Connection/Disconnection Notifications
New Playback Functions including
- Skip to Next Clip (supported for both mag and ram review)
- Jump to start and end
- More Meta Info
- Variable Rate Jog Bar
- Tap to jump to point on timeline
Captures Modes
- Continuous Mode
- Auto Save
- Auto Clear
- Production Area and Center Dot Presets
1.1
Dec 18, 2015
New in V1.1
Flex4K v53 updates
UI Updates
Record Tab
Live Camera/Sensor Temperature Monitoring
Mag Usage Updates in Run/Stop Mode
Settings
Asks to Confirm before switching to Run/Stop
Playback Tab
FPS, Shutter Angle, Resolution display of current playing cine
Current SDI Format Display
Playback Speed Label, Shows Current Playback Speed
Reversed order of Mag Cines on Cine Select Dialog for quicker access to recent clips
New Features
Settings
Production Area Setting
Set Camera Clock to iOS time
Phantom Log2 Support
Custom Keyboard for number Entry
Playback
Playback Mode Button for Auto Loop Playback
Slider Multiplier Button allows adjustment of playback slider speed
Fast Forward/Rewind Buttons Behavior Updated
-Frame Advance when paused
-Increments/Decrements Speed by 2x when playing
Shortcuts
Restart Playback From In Point
Press and Hold on Rewind Button Restarts Playback
Check the Gate:
Press and Hold on Cine Select Plays Last Clip on Mag
Fixes
Negative Values allowed for CC input
Stop Camera from autorolling when Set to Run/Stop Mode
Flex4K v53 updates
UI Updates
Record Tab
Live Camera/Sensor Temperature Monitoring
Mag Usage Updates in Run/Stop Mode
Settings
Asks to Confirm before switching to Run/Stop
Playback Tab
FPS, Shutter Angle, Resolution display of current playing cine
Current SDI Format Display
Playback Speed Label, Shows Current Playback Speed
Reversed order of Mag Cines on Cine Select Dialog for quicker access to recent clips
New Features
Settings
Production Area Setting
Set Camera Clock to iOS time
Phantom Log2 Support
Custom Keyboard for number Entry
Playback
Playback Mode Button for Auto Loop Playback
Slider Multiplier Button allows adjustment of playback slider speed
Fast Forward/Rewind Buttons Behavior Updated
-Frame Advance when paused
-Increments/Decrements Speed by 2x when playing
Shortcuts
Restart Playback From In Point
Press and Hold on Rewind Button Restarts Playback
Check the Gate:
Press and Hold on Cine Select Plays Last Clip on Mag
Fixes
Negative Values allowed for CC input
Stop Camera from autorolling when Set to Run/Stop Mode
1.00.040
Jun 5, 2015
Record Tab
-added Sensor Mode and Corrected Resolution Display for Flex4K
-added feedback for post trigger still rolling, status image changes to full red during post trigger recording as it does on Flex4K LCD
-fixed gain display for PH7 cameras on record page
Play Tab
-tap or scrub on the playback timeline to jump to and scrubbing PH16 Cameras Only
-added post trigger position to playback tab timeline
Settings Tab
-fixed issue that cause fps direct entry to bring up picker only
-add log mode setting for Flex4K
-added Sensor Mode and Corrected Resolution Display for Flex4K
-added Sensor Mode and Corrected Resolution Display for Flex4K
-added feedback for post trigger still rolling, status image changes to full red during post trigger recording as it does on Flex4K LCD
-fixed gain display for PH7 cameras on record page
Play Tab
-tap or scrub on the playback timeline to jump to and scrubbing PH16 Cameras Only
-added post trigger position to playback tab timeline
Settings Tab
-fixed issue that cause fps direct entry to bring up picker only
-add log mode setting for Flex4K
-added Sensor Mode and Corrected Resolution Display for Flex4K
1.00.037
Apr 10, 2015
iPhantom FAQ
Click here to learn how to download iPhantom in restricted country or region.
Check the following list to see the minimum requirements of iPhantom.
iPhone
Requires iOS 12.0 or later.
iPod touch
Requires iOS 12.0 or later.
iPhantom supports English
iPhantom contains in-app purchases. Please check the pricing plan as below:
Yearly Auto-Renew Subscription
$299.99
48 Hour Project License
$44.99
14 Day Project License
$89.99
