WoodScaper
guitar effects
$9.99
1.4.4for iPhone, iPad and more
9.3
3 Ratings
Woodman's Immaculate Maple Syrup Studio
Developer
11.9 MB
Size
Oct 22, 2023
Update Date
Music
Category
4+
Age Rating
Age Rating
WoodScaper Screenshots
About WoodScaper
WoodScaper combines into one unit the 4 classic guitar effects : phaser, chorus/flanger, wah-wah and tremelo. Besides the familiar controls each effect has some extra not-so-commonly-found options. The 4 effects can be routed in series (pedalboard mode), parallel (DAW mode) or some combinations of those modes. Panning or the Stereo control can create stereo sounds from a mono input source. WoodScaper is both stand-alone and an AUv3 effect.
- All LFO’s can be set to different waveforms : Sine, Square, Saw Up, Saw Down, Triangle.
- All LFO frequencies can be set to a bar fraction (1/4, 1/8 , …) of the BPM or can be set free to a specific rate
(independent from the BPM).
- All LFO phases can be reset with a button.
- All effects have an On/Off (parallel routing) or On/Bypass (serial routing) switch like on a pedalboard. The switches can
be toggled by Midi CC’s.
- Phaser has settings for number of poles, frequency range and modulation flavour.
- Phaser has second LFO to modulate filter Q.
- Chorus has feedback, HighPass, LowPass and Saturation.
- Wah-wah control can be LFO, Envelope, Envelope + LFO, side chain, Midi note velocity or Midi CC 1 (mod wheel).
- Wah Envelope has Attack, Release and Threshold or Sensitivity controls.
- Wah can go up or down.
- Wah filter type and Q can be set.
- Tremolo has 3 types : Amplitude, Ring or Harmonic.
- Harmonic Tremolo has cross-over frequency control.
- Tremolo has a Threshold control to have more tremolo when the signal increases.
- Tremolo has “Biased Tremolo” mode to get more tremolo when the signal decreases.
- Has a global Input and Output Gain control.
- Has 2 extra LFO’s to modulate most parameters (rates, depths, …)
- Modulation LFO’s have their own slew rate control and a random mode.
- Presets can be stored in iCloud Drive (makes them available on all your devices).
- Presets can be switched with Midi Program Changes or a Midi CC (up or down)
- Major controls can be set with Midi CC messages.
- All LFO’s can be set to different waveforms : Sine, Square, Saw Up, Saw Down, Triangle.
- All LFO frequencies can be set to a bar fraction (1/4, 1/8 , …) of the BPM or can be set free to a specific rate
(independent from the BPM).
- All LFO phases can be reset with a button.
- All effects have an On/Off (parallel routing) or On/Bypass (serial routing) switch like on a pedalboard. The switches can
be toggled by Midi CC’s.
- Phaser has settings for number of poles, frequency range and modulation flavour.
- Phaser has second LFO to modulate filter Q.
- Chorus has feedback, HighPass, LowPass and Saturation.
- Wah-wah control can be LFO, Envelope, Envelope + LFO, side chain, Midi note velocity or Midi CC 1 (mod wheel).
- Wah Envelope has Attack, Release and Threshold or Sensitivity controls.
- Wah can go up or down.
- Wah filter type and Q can be set.
- Tremolo has 3 types : Amplitude, Ring or Harmonic.
- Harmonic Tremolo has cross-over frequency control.
- Tremolo has a Threshold control to have more tremolo when the signal increases.
- Tremolo has “Biased Tremolo” mode to get more tremolo when the signal decreases.
- Has a global Input and Output Gain control.
- Has 2 extra LFO’s to modulate most parameters (rates, depths, …)
- Modulation LFO’s have their own slew rate control and a random mode.
- Presets can be stored in iCloud Drive (makes them available on all your devices).
- Presets can be switched with Midi Program Changes or a Midi CC (up or down)
- Major controls can be set with Midi CC messages.
Show More
What's New in the Latest Version 1.4.4
Last updated on Oct 22, 2023
Old Versions
fixed automation in LogicPro
fixed midi receive when not in DAW
fixed midi receive when not in DAW
Show More
Version History
1.4.4
Oct 22, 2023
fixed automation in LogicPro
fixed midi receive when not in DAW
fixed midi receive when not in DAW
1.4.3
Jul 14, 2023
small UI bug fixes
1.3
May 22, 2020
- Added popup sliders to set the LFO waveforms : allows to select immediately the wanted waveform but also allows to slide between 2 waveforms obtaining some new cross-over waveform.
- Fixed automation in AUM (AUv3).
- Fixed slew rate setting for pulse waveforms.
- Pulse waveforms width increased to 40% to make it more usable.
- Fixed automation in AUM (AUv3).
- Fixed slew rate setting for pulse waveforms.
- Pulse waveforms width increased to 40% to make it more usable.
1.2
May 7, 2020
Added Next and Previous preset buttons.
Fixed LFO2 slew rate rotary.
Fixed small LFO led update problem.
“Add preset” window now stays on top also when Advanced window is visible.
Midi CC’s for the effects On/Off now also have an on/off value besides the toggle mode.
Midi CC 104 (Phaser Level) is now working correctly.
Fixed LFO2 slew rate rotary.
Fixed small LFO led update problem.
“Add preset” window now stays on top also when Advanced window is visible.
Midi CC’s for the effects On/Off now also have an on/off value besides the toggle mode.
Midi CC 104 (Phaser Level) is now working correctly.
1.1
May 3, 2020
- fix for AUv3 not showing (in AUM)
- fixed some small icon views
- fixed some small icon views
1.0
May 3, 2020
WoodScaper FAQ
Click here to learn how to download WoodScaper in restricted country or region.
Check the following list to see the minimum requirements of WoodScaper.
iPhone
Requires iOS 9.3 or later.
iPad
Requires iPadOS 9.3 or later.
iPod touch
Requires iOS 9.3 or later.