CPS Connect
Free
1.3.0120for iPhone
Age Rating
لقطات الشاشة لـ CPS Connect
About CPS Connect
LinKit App is a multi-functional tool for configuration and troubleshooting with a LinKit hardware.
LinKit App gives the user access to complete the installation, configuration, and troubleshooting of the Flex Gateway and inverters. The site installation by using laptop, oscilloscope or other assistance tools in the past is now replaced by a smartphone.
Functions:
1. Configure Flex Gateway and Inverter and check if it is configured successfully.
2. Initialize the new site system and the site owner can monitor all relevant electrical data real-time, control the device and upgrade the firmware remotely.
3. Upgrade the firmware of Flex Gateway, Inverters and LinKit on site.
LinKit App gives the user access to complete the installation, configuration, and troubleshooting of the Flex Gateway and inverters. The site installation by using laptop, oscilloscope or other assistance tools in the past is now replaced by a smartphone.
Functions:
1. Configure Flex Gateway and Inverter and check if it is configured successfully.
2. Initialize the new site system and the site owner can monitor all relevant electrical data real-time, control the device and upgrade the firmware remotely.
3. Upgrade the firmware of Flex Gateway, Inverters and LinKit on site.
Show More
تحديث لأحدث إصدار 1.3.0120
Last updated on 22/01/2020
الإصدارات القديمة
1.Fixed some power station activation issues
Show More
Version History
1.3.0120
22/01/2020
1.Fixed some power station activation issues
1.3.0116
17/01/2020
1. Urgently fixed the issue of the first generation linkit firmware
1.3.0114
15/01/2020
1. Fixed some Linkit issues
1.3.0107
07/01/2020
1.Modified the problem that the negative value of inverter setting value is displayed incorrectly
1.2.1231
04/01/2020
1. Add grid regulation IEC61727 (0X290C)
2.Add model (0X290B)
2.Add model (0X290B)
1.2.1128
29/11/2019
1. Modified the display problem of 25kw register
1.2.1120
21/11/2019
1. Modified the setting display problem of Secondary MQTT
1.2.1108
12/11/2019
1. Modified the display adaptation problem when configuring mqtt2
1.2.1107
07/11/2019
1. Modified the response timeout problem caused by reading the register function code error.
1.2.1102
06/11/2019
1. Add MQTT2 address setting
1.2.1011
11/10/2019
1. Fixed iOS13 adaptation issues
2. Fixed other issues
2. Fixed other issues
1.2.0912
19/09/2019
1. Added some registers
2. Newly added one machine model
3. Modified PmaxLim, SmaxLim, if the user reads this register is empty, please update the app to the latest version.
4. Added voltage harmonic display
5. Modified other issues
2. Newly added one machine model
3. Modified PmaxLim, SmaxLim, if the user reads this register is empty, please update the app to the latest version.
4. Added voltage harmonic display
5. Modified other issues
1.2.0808
08/08/2019
1. Modified part of the display problem of Inverter
2. Modified the read and write issues of the Flex Gateway partial registers
3. modified the problem of the synchronization register
2. Modified the read and write issues of the Flex Gateway partial registers
3. modified the problem of the synchronization register
1.2.0806
07/08/2019
1. Modified part of the display problem of Inverter
2. Modified the read and write issues of the Flex Gateway partial registers
3, modified other issues
2. Modified the read and write issues of the Flex Gateway partial registers
3, modified other issues
1.2.0717
18/07/2019
1. Add 25kw inverter
2. Modified some registers
2. Modified some registers
1.2.0605
05/06/2019
1.Modified the problem of power station loading in my Site
1.2.0416
19/04/2019
1. Improved interface display logic
2. Fixed the problem of missing models during the upgrade process.
2. Fixed the problem of missing models during the upgrade process.
1.2.0307
12/03/2019
1. Modified the display name of some registers
2. Modified the display problem of some prompts
2. Modified the display problem of some prompts
1.2.0116
18/01/2019
1. Added lcd and dsp firmware upgrades
2. Modified the no screen inverter No data problem
3. Modified other issues
2. Modified the no screen inverter No data problem
3. Modified other issues
1.1.1021
23/10/2018
1.App adds user role 。
1.1.930
01/10/2018
1.Modified the page's jump logic
1.1.921
21/09/2018
1. Fixed some UI issues
2. Modified the page's jump logic
2. Modified the page's jump logic
1.1.907
10/09/2018
1.Modify register name Description(0X2703.0X270A)
2. Modify the register value range(0X2508.0X2509)
3.Add the register(0X2627.0X2628)
4.Modify "Powerful Overpower Overmatch" function display interface
5.Modify the display logic of AutoTest (CEI)
2. Modify the register value range(0X2508.0X2509)
3.Add the register(0X2627.0X2628)
4.Modify "Powerful Overpower Overmatch" function display interface
5.Modify the display logic of AutoTest (CEI)
1.1.806
10/08/2018
1. Modified the problem that the test failed MQTT is none.
2.Optimized some known issues
2.Optimized some known issues
1.1.601
03/06/2018
1. New synchronization register function
2. The firmware version of the Apple App connected to the screenless inverter does not show the version number
3. Modify the inverter below the main page has a number of settings button
4 firmware upgrade Model type, increase the name of the first letter filter rules
5. Modified some known bugs, etc.
2. The firmware version of the Apple App connected to the screenless inverter does not show the version number
3. Modify the inverter below the main page has a number of settings button
4 firmware upgrade Model type, increase the name of the first letter filter rules
5. Modified some known bugs, etc.
1.1.520
21/05/2018
optimize the register read/write function
Fixed some issues of inverter support model
Fixed some issues of inverter support model
1.1.415
16/04/2018
Optimize the user experience,
1.1.402
03/04/2018
Add Flex Gateway activated information
1.1.2
27/03/2018
1 Adjust the operation flow of the home page
2 Interface optimization
2 Interface optimization
1.1.1
12/02/2018
1 Add firmware upgrade function
2 Interface adjustment
3 Bug fixed
2 Interface adjustment
3 Bug fixed
1.1.0
02/01/2018
1 更改License流程
2 Bug修改
2 Bug修改
1.0.7
10/11/2017
1 启动界面调整，添加直连linkit功能
2修改Add Device ID后的排序问题
3 修改Inverter Range的显示问题
2修改Add Device ID后的排序问题
3 修改Inverter Range的显示问题
1.0.6
30/10/2017
1、修改gateway、Inverter状态标识
2、chart图月视图、年视图改成柱状图;日视图BUG修改
3、增加Google Map
4、LINKIT配新卡可以取消，当有错误时，可以重新来过。
2、chart图月视图、年视图改成柱状图;日视图BUG修改
3、增加Google Map
4、LINKIT配新卡可以取消，当有错误时，可以重新来过。
1.0.5
23/10/2017
1、Gateway 新增IP地址、网关、DNS等详细联网信息的显示
2、通过搜索站点名称或FlexCard名称 报告移除破损卡
3、逆变器扫描只显示在线的逆变器
4、修复一些已知BUG
5、无屏逆变器 首页数据显示增加实时刷新机制
6、无屏逆变器 开关机修改为统一操作寄存器0x2700、功能码0x06
7、无屏逆变器 发电量柱状图数据协议调整完善
8、无屏逆变器 0x06功能码写寄存器失败的问题修改
2、通过搜索站点名称或FlexCard名称 报告移除破损卡
3、逆变器扫描只显示在线的逆变器
4、修复一些已知BUG
5、无屏逆变器 首页数据显示增加实时刷新机制
6、无屏逆变器 开关机修改为统一操作寄存器0x2700、功能码0x06
7、无屏逆变器 发电量柱状图数据协议调整完善
8、无屏逆变器 0x06功能码写寄存器失败的问题修改
1.0.3
27/09/2017
修复一些BUG
1.0.2
17/09/2017
1、FlexCard新增IP地址等网络连接相关信息的显示
2、逆变器扫描 列表只显示在线的逆变器信息
3、删除PT-Port、INVs-Port的Enable/Disable功能
4、新增消息推送功能
5、修复一些 BUG
2、逆变器扫描 列表只显示在线的逆变器信息
3、删除PT-Port、INVs-Port的Enable/Disable功能
4、新增消息推送功能
5、修复一些 BUG
1.0.1
10/09/2017
1. 无屏逆变器历史运行记录和故障记录的读取
2. 无屏逆变器固件升级功能优化完善
3. 无屏逆变器设置寄存器Group的完善
4. 修复一些 BUG
2. 无屏逆变器固件升级功能优化完善
3. 无屏逆变器设置寄存器Group的完善
4. 修复一些 BUG
1.0.0
29/08/2017
1. 无屏逆变器的功能界面修改优化
2. 添加无屏逆变器的一些设置参数
3. 新增无屏逆变器的固件升级功能
4. 修复一些BUG
2. 添加无屏逆变器的一些设置参数
3. 新增无屏逆变器的固件升级功能
4. 修复一些BUG
0.1.4
06/08/2017
1. Site / B4E / Inverter 详细信息的展示 ;
2. Site / Inverter Chart 的展示 ；
3. Inverter Settings ;
4. Fixed some Bugs .
2. Site / Inverter Chart 的展示 ；
3. Inverter Settings ;
4. Fixed some Bugs .
0.1.2
11/07/2017
1. 新增已安装 Site 列表和地图位置信息显示；
2. 优化 LinKIT 连接配置流程；
3. 修改完善 Site 和 Flex Card 安装流程；
4. 修改 BUG；
2. 优化 LinKIT 连接配置流程；
3. 修改完善 Site 和 Flex Card 安装流程；
4. 修改 BUG；
0.1.1
27/06/2017
1. 新增 Gateway 与 Modbus 设备的通讯功能；
2. 新增 Gateway Modbus 寄存器的读写操作；
3. Bug 修改；
2. 新增 Gateway Modbus 寄存器的读写操作；
3. Bug 修改；
0.1.0
15/06/2017
CPS Connect FAQ
انقر هنا لمعرفة كيفية تنزيل CPS Connect في بلد أو منطقة محظورة.
تحقق من القائمة التالية لمعرفة الحد الأدنى من المتطلبات CPS Connect.
iPhone
CPS Connect هي مدعومة على اللغات Chinese, English
