Danalock Classic
Gratis
3.20.0for iPhone, iPad and more
Age Rating
لقطات الشاشة لـ Danalock Classic
About Danalock Classic
Download the Danalock app if you own a Danalock or if you have received an invitation to use a Danalock.
Features:
The Danalock App comes with a completely new and user friendly layout as well as a full feature set which includes:
- Intuitive guide to set up your Danalock
- Automatic as well as manual calibration of your Danalock
- Ability to monitor the current lock state (latched/unlatched) when within Bluetooth range
- GPS-based automatic unlocking when you get home
- Motorized locking assistance with Twist Assist
- Door latch-holding for unlocking doors without a handle
- Automatic re-locking after you get home
- Easy customization and management of guests with 3 separate levels of access
Read more about the features on www.danalock.com
The Danalock App uses Bluetooth 4 and is compatible with iOS 10.3 and above. However, the best experience is gained on versions iOS 12 and above.
Features:
The Danalock App comes with a completely new and user friendly layout as well as a full feature set which includes:
- Intuitive guide to set up your Danalock
- Automatic as well as manual calibration of your Danalock
- Ability to monitor the current lock state (latched/unlatched) when within Bluetooth range
- GPS-based automatic unlocking when you get home
- Motorized locking assistance with Twist Assist
- Door latch-holding for unlocking doors without a handle
- Automatic re-locking after you get home
- Easy customization and management of guests with 3 separate levels of access
Read more about the features on www.danalock.com
The Danalock App uses Bluetooth 4 and is compatible with iOS 10.3 and above. However, the best experience is gained on versions iOS 12 and above.
Show More
تحديث لأحدث إصدار 3.20.0
Last updated on 30/10/2023
الإصدارات القديمة
Bug fix and security update.
Show More
Version History
3.20.0
30/10/2023
Bug fix and security update.
3.18.0
04/01/2023
Fixed a bug that could make the app crash when adding new pincodes
3.17.0
31/10/2022
All accessory devices are now loaded in "My Accessory Devices" not just the first 1000.
3.16.0
15/09/2022
Improved user experience owing to various behind-the-scenes bug fixes.
3.15.0
30/06/2022
Improvements:
- Danabridge WiFi setup has been improved
- Localizations updated for all supported languages
- Danabridge WiFi setup has been improved
- Localizations updated for all supported languages
3.14.0
17/01/2022
Users will no longer encounter error 9 when updating device firmware.
3.13.0
10/01/2022
Improvements:
- Login is now done more securely
Fixes:
- Removed default value of 5 seconds for the Hold back latch feature
- Inviting users via link or email on iPad no longer causes a crash
- Login is now done more securely
Fixes:
- Removed default value of 5 seconds for the Hold back latch feature
- Inviting users via link or email on iPad no longer causes a crash
3.12.0
22/11/2021
Bug fixes and performance improvements.
3.11.1
01/11/2021
Added language localisations for:
- Chinese
- German
- Greek
- Japanese
- Portuguese
- Russian
- Spanish
- Swedish
- Chinese
- German
- Greek
- Japanese
- Portuguese
- Russian
- Spanish
- Swedish
3.11.0
22/10/2021
- New versions of the Danalock app will require iOS 13.7 or higher
- Various bug fixes and performance improvements
- Various bug fixes and performance improvements
3.10.0
20/09/2021
Improvements:
– Can now display Danapad battery warnings
– Localized strings in the app have been cleaned up
– Auto unlock still set after sign out and back in
Bug fixes:
– Failing to load keys because of having 100+ locks in your account now gives a more helpful error message
– Can now display Danapad battery warnings
– Localized strings in the app have been cleaned up
– Auto unlock still set after sign out and back in
Bug fixes:
– Failing to load keys because of having 100+ locks in your account now gives a more helpful error message
3.9.0
30/08/2021
Improvements
-Better error handling for HomeKit locks
Bug fixes
-Auto Unlock radius issue fixed
-Fixed an issue where firmware upgrade could get stuck
-Removed false low battery warning
-Minor UI issues fixed
-Better error handling for HomeKit locks
Bug fixes
-Auto Unlock radius issue fixed
-Fixed an issue where firmware upgrade could get stuck
-Removed false low battery warning
-Minor UI issues fixed
3.8.4
09/08/2021
Improvements
-Finnish language included
-Finnish language included
3.8.3
12/07/2021
-Improved logging for debug purposes
-Better stability when upgrading firmware
-Better stability when upgrading firmware
3.8.2
14/06/2021
New features
- Battery level have been updated to show High, Medium and Low levels. A warning message will be sent when battery level reaches certain critical points.
Improvements
- Users are guided on what it means to upgrade a HomeKit lock from version 1.* to version 2.*
- Notification permissions are now not asked for until actually needed.
- Users are now better guided if they try to activate Auto-Unlock but location permission has not been accepted.
Bug fixes
- Users are now logged out and sent to the sign in page if their access token expires
- Dual mode locks now works as they should
- The app now handles scandinavian letters correctly when pairing a bridge to a wifi network
- Fixed device settings not always resetting properly when switching between locks.
- A bug have been fixed where the app could crash when setting auto lock timeout
- Fixed an issue causing the app to request location permission before actually needing it.
- Battery level have been updated to show High, Medium and Low levels. A warning message will be sent when battery level reaches certain critical points.
Improvements
- Users are guided on what it means to upgrade a HomeKit lock from version 1.* to version 2.*
- Notification permissions are now not asked for until actually needed.
- Users are now better guided if they try to activate Auto-Unlock but location permission has not been accepted.
Bug fixes
- Users are now logged out and sent to the sign in page if their access token expires
- Dual mode locks now works as they should
- The app now handles scandinavian letters correctly when pairing a bridge to a wifi network
- Fixed device settings not always resetting properly when switching between locks.
- A bug have been fixed where the app could crash when setting auto lock timeout
- Fixed an issue causing the app to request location permission before actually needing it.
3.8.1
26/04/2021
Translations have been improved for multiple languages
3.8.0
14/04/2021
Features
- The app now shows a notification and an icon in key keychain when battery level of a lockgoes below 30%
- It is now possible to toggle if a Zigbee 3.0 lock should join or leave a network.
- Privacy-first on-device logging added for better customer support.
Improvements
- Timeout when connecting to the Danalock servers has been increased.
- The log tab on the front page has been renamed to History.
- Locks shown in the keychain are now sorted by signal strength with locks in range first
Bugs
- A bug have been fixed where homekit locks would sometimes show a battery level of 0% eventhough the level was higher than that
- We found a bug that happened when setting timezones for a lock, this is now fixed whichmakes temporary pincodes work on Danapads again
- Fixed a bug where locks would sometimes appear out of range, when they in fact are in range.
- The app now shows a notification and an icon in key keychain when battery level of a lockgoes below 30%
- It is now possible to toggle if a Zigbee 3.0 lock should join or leave a network.
- Privacy-first on-device logging added for better customer support.
Improvements
- Timeout when connecting to the Danalock servers has been increased.
- The log tab on the front page has been renamed to History.
- Locks shown in the keychain are now sorted by signal strength with locks in range first
Bugs
- A bug have been fixed where homekit locks would sometimes show a battery level of 0% eventhough the level was higher than that
- We found a bug that happened when setting timezones for a lock, this is now fixed whichmakes temporary pincodes work on Danapads again
- Fixed a bug where locks would sometimes appear out of range, when they in fact are in range.
3.7.31
01/03/2021
Connection issues with HomeKit locks has been fixed.
3.7.30
25/02/2021
Improvements:
-HomeKit locks are now more responsive
Bug fixes:
-Fixed an issue where some users would not be able to connect their DanaBridge to a wifi network
-Fixed another issue where HomeKit users would sometimes not be able to do firmware upgrades
-HomeKit locks are now more responsive
Bug fixes:
-Fixed an issue where some users would not be able to connect their DanaBridge to a wifi network
-Fixed another issue where HomeKit users would sometimes not be able to do firmware upgrades
3.7.29
16/02/2021
Improvements
Auto Unlock has had an internal overhaul and should now function much better
Setting up timed access to a lock now shows the date/time picker correctly on iOS 14
Fixes
Fixed an issue in Danalock Keys today extension that could make it unresponsive and not able to operate a lock.
Fixed device log not always displaying all log entries.
Fixed an issue that could cause the app to ask for a device name continuously when enrolling the device.
Fixed device settings page sometimes not showing all available settings.
Auto Unlock has had an internal overhaul and should now function much better
Setting up timed access to a lock now shows the date/time picker correctly on iOS 14
Fixes
Fixed an issue in Danalock Keys today extension that could make it unresponsive and not able to operate a lock.
Fixed device log not always displaying all log entries.
Fixed an issue that could cause the app to ask for a device name continuously when enrolling the device.
Fixed device settings page sometimes not showing all available settings.
3.7.28
08/01/2021
Creating a new user requires a more complex password than previously. Existing passwords are not affected.
3.7.027
09/11/2020
Login screen bug fixed
3.7.026
26/10/2020
Hotfix for iOS 12 crash
3.7.025
20/10/2020
Fixed an issue where users would sometimes be forced to sign out of the app and then sign in again.
3.7.024
01/10/2020
Features
- Device firmware and bootloader can now be updated directly from a zip file
Improvements
- Users can now log in with FaceID
- List of accessory devices is now sorted alphabetically by name
- Users will now be notified if throttling is occurring when manually refreshing keys from the server
Bug fixes
- Fixed an issue where some users would be unable to use the Easy lock feature with their Danapad
- Fixed a crash when enabling the Auto unlock feature
- Fixed a bug where the loading screen would not be dismissed when refreshing key from the server
- Fixed an issue where a Danapad is still paired with a lock after deleting the Danapad
- Device firmware and bootloader can now be updated directly from a zip file
Improvements
- Users can now log in with FaceID
- List of accessory devices is now sorted alphabetically by name
- Users will now be notified if throttling is occurring when manually refreshing keys from the server
Bug fixes
- Fixed an issue where some users would be unable to use the Easy lock feature with their Danapad
- Fixed a crash when enabling the Auto unlock feature
- Fixed a bug where the loading screen would not be dismissed when refreshing key from the server
- Fixed an issue where a Danapad is still paired with a lock after deleting the Danapad
Danalock Classic FAQ
انقر هنا لمعرفة كيفية تنزيل Danalock Classic في بلد أو منطقة محظورة.
تحقق من القائمة التالية لمعرفة الحد الأدنى من المتطلبات Danalock Classic.
iPhone
Requiere iOS 13.7 o posterior.
iPad
Requiere iPadOS 13.7 o posterior.
iPod touch
Requiere iOS 13.7 o posterior.
Danalock Classic هي مدعومة على اللغات Español, Alemán, Chino simplificado, Danés, Eslovaco, Finés, Francés, Griego, Inglés, Italiano, Japonés, Neerlandés, Portugués, Ruso, Sueco, Vietnamita