Light Project
무료
3.9.12for iPhone, iPod touch
Age Rating
Light Project 스크린 샷
About Light Project
This is an App with special firmware of BLE led lighting. User can use this App to upgrade lighting and set Max brightness.
Show More
최신 버전 3.9.12의 새로운 기능
Last updated on Oct 21, 2019
오래된 버전
The linkage mechanism is revised as following:
1. The linkage priority is higher than T2 (2nd Time Delay), so the linkage can be entered in the T2 state; the linkage doesn’t work during the T2 state in the previous versions2. Now the T2 state is no longer the state of absolute brightness, and is also controlled by the ambient lighting. T2 state in the previous version is not affected by the ambient lighting.
3. To set the linkage, the ratio corresponding to the T1 illuminance is defined, and only the ratio value is recorded without changing the brightness. In the previous versions, the brightness of the fixture will be changed. Now, since it has been changed to illuminance, the brightness of the fixture is no longer adjusted (changed to the scroll design). The latest firmware will work in the latest APP. The latest APP is compatible with the previous firmware.
4. Previously “Dim to %” is the percentage of the current brightness and is now changed to the percentage of T1 illuminance.
Others:
1.ON and AUTO merge
2.Add “Parameter Setting” function: PWM frequency adjustable, Top trim, Bottom trim, Min Auto light, Fade time, etc
3. The brightness of the fixture before the Buildnumber190606 is not uniform after power on. From 190606, after the fixture is powered on, it outputs 100% brightness, and the sensor still works. If the ambient light changes subsequently, the brightness of the lamp changes accordingly.
1. The linkage priority is higher than T2 (2nd Time Delay), so the linkage can be entered in the T2 state; the linkage doesn’t work during the T2 state in the previous versions2. Now the T2 state is no longer the state of absolute brightness, and is also controlled by the ambient lighting. T2 state in the previous version is not affected by the ambient lighting.
3. To set the linkage, the ratio corresponding to the T1 illuminance is defined, and only the ratio value is recorded without changing the brightness. In the previous versions, the brightness of the fixture will be changed. Now, since it has been changed to illuminance, the brightness of the fixture is no longer adjusted (changed to the scroll design). The latest firmware will work in the latest APP. The latest APP is compatible with the previous firmware.
4. Previously “Dim to %” is the percentage of the current brightness and is now changed to the percentage of T1 illuminance.
Others:
1.ON and AUTO merge
2.Add “Parameter Setting” function: PWM frequency adjustable, Top trim, Bottom trim, Min Auto light, Fade time, etc
3. The brightness of the fixture before the Buildnumber190606 is not uniform after power on. From 190606, after the fixture is powered on, it outputs 100% brightness, and the sensor still works. If the ambient light changes subsequently, the brightness of the lamp changes accordingly.
Show More
Version History
3.9.12
Oct 21, 2019
The linkage mechanism is revised as following:
1. The linkage priority is higher than T2 (2nd Time Delay), so the linkage can be entered in the T2 state; the linkage doesn’t work during the T2 state in the previous versions2. Now the T2 state is no longer the state of absolute brightness, and is also controlled by the ambient lighting. T2 state in the previous version is not affected by the ambient lighting.
3. To set the linkage, the ratio corresponding to the T1 illuminance is defined, and only the ratio value is recorded without changing the brightness. In the previous versions, the brightness of the fixture will be changed. Now, since it has been changed to illuminance, the brightness of the fixture is no longer adjusted (changed to the scroll design). The latest firmware will work in the latest APP. The latest APP is compatible with the previous firmware.
4. Previously “Dim to %” is the percentage of the current brightness and is now changed to the percentage of T1 illuminance.
Others:
1.ON and AUTO merge
2.Add “Parameter Setting” function: PWM frequency adjustable, Top trim, Bottom trim, Min Auto light, Fade time, etc
3. The brightness of the fixture before the Buildnumber190606 is not uniform after power on. From 190606, after the fixture is powered on, it outputs 100% brightness, and the sensor still works. If the ambient light changes subsequently, the brightness of the lamp changes accordingly.
1. The linkage priority is higher than T2 (2nd Time Delay), so the linkage can be entered in the T2 state; the linkage doesn’t work during the T2 state in the previous versions2. Now the T2 state is no longer the state of absolute brightness, and is also controlled by the ambient lighting. T2 state in the previous version is not affected by the ambient lighting.
3. To set the linkage, the ratio corresponding to the T1 illuminance is defined, and only the ratio value is recorded without changing the brightness. In the previous versions, the brightness of the fixture will be changed. Now, since it has been changed to illuminance, the brightness of the fixture is no longer adjusted (changed to the scroll design). The latest firmware will work in the latest APP. The latest APP is compatible with the previous firmware.
4. Previously “Dim to %” is the percentage of the current brightness and is now changed to the percentage of T1 illuminance.
Others:
1.ON and AUTO merge
2.Add “Parameter Setting” function: PWM frequency adjustable, Top trim, Bottom trim, Min Auto light, Fade time, etc
3. The brightness of the fixture before the Buildnumber190606 is not uniform after power on. From 190606, after the fixture is powered on, it outputs 100% brightness, and the sensor still works. If the ambient light changes subsequently, the brightness of the lamp changes accordingly.
3.1.11
Oct 18, 2019
The linkage mechanism is revised as following:
1. The linkage priority is higher than T2 (2nd Time Delay), so the linkage can be entered in the T2 state; the linkage doesn’t work during the T2 state in the previous versions2. Now the T2 state is no longer the state of absolute brightness, and is also controlled by the ambient lighting. T2 state in the previous version is not affected by the ambient lighting.
3. To set the linkage, the ratio corresponding to the T1 illuminance is defined, and only the ratio value is recorded without changing the brightness. In the previous versions, the brightness of the fixture will be changed. Now, since it has been changed to illuminance, the brightness of the fixture is no longer adjusted (changed to the scroll design). The latest firmware will work in the latest APP. The latest APP is compatible with the previous firmware.
4. Previously “Dim to %” is the percentage of the current brightness and is now changed to the percentage of T1 illuminance.
Others:
1.ON and AUTO merge
2.Add “Parameter Setting” function: PWM frequency adjustable, Top trim, Bottom trim, Min Auto light, Fade time, etc
3. The brightness of the fixture before the Buildnumber190606 is not uniform after power on. From 190606, after the fixture is powered on, it outputs 100% brightness, and the sensor still works. If the ambient light changes subsequently, the brightness of the lamp changes accordingly.
1. The linkage priority is higher than T2 (2nd Time Delay), so the linkage can be entered in the T2 state; the linkage doesn’t work during the T2 state in the previous versions2. Now the T2 state is no longer the state of absolute brightness, and is also controlled by the ambient lighting. T2 state in the previous version is not affected by the ambient lighting.
3. To set the linkage, the ratio corresponding to the T1 illuminance is defined, and only the ratio value is recorded without changing the brightness. In the previous versions, the brightness of the fixture will be changed. Now, since it has been changed to illuminance, the brightness of the fixture is no longer adjusted (changed to the scroll design). The latest firmware will work in the latest APP. The latest APP is compatible with the previous firmware.
4. Previously “Dim to %” is the percentage of the current brightness and is now changed to the percentage of T1 illuminance.
Others:
1.ON and AUTO merge
2.Add “Parameter Setting” function: PWM frequency adjustable, Top trim, Bottom trim, Min Auto light, Fade time, etc
3. The brightness of the fixture before the Buildnumber190606 is not uniform after power on. From 190606, after the fixture is powered on, it outputs 100% brightness, and the sensor still works. If the ambient light changes subsequently, the brightness of the lamp changes accordingly.
3.1.10
Sep 10, 2019
Firmware build number 190704.
Light version 3.1.9
Light version 3.1.9
2.3
Jan 28, 2019
Firmware build number 181224.
Light version 3.1.8
Light version 3.1.8
2.0
Dec 29, 2018
1. New firmware for light.
2. Performance improvement.
2. Performance improvement.
1.0
Sep 3, 2018
Light Project FAQ
제한된 국가 또는 지역에서 Light Project를 다운로드하는 방법을 알아보려면 여기를 클릭하십시오.
Light Project의 최소 요구 사항을 보려면 다음 목록을 확인하십시오.
iPhone
iOS 8.0 이상 필요.
iPod touch
iOS 8.0 이상 필요.
Light Project은 다음 언어를 지원합니다. 영어, 중국어(간체), 중국어(번체), 포르투갈어